Wenshing RD-710F User manual

http://www.wenshing.com.tw ; http://www.rf.net.tw
RD-710F Instruction Manual P.1
WENSHING®© RD-710F
Garage Door/Door Opener/Electronic Gate Remote Controller
Modulation : FSK
Frequency : 433.9MHz
Sensitivity : 4uV
Code : 28,212,or 38,312
Power Supply : 110/220V AC/DC
Relay Contact Voltage : 5A 24V/DC or 120V/AC
Power Consumption : 10.5 mA/12V
Control type : on/off, momentary, continue
Size : 14*8.8*3.7cm
Usage Range : Electronic lock, Garage door, Home alarm security
system, Auto control system.
WENSHING Confidential
Do Not Distribution

http://www.wenshing.com.tw ; http://www.rf.net.tw
RD-710F Instruction Manual P.2
Content
Important Event................. ..... .. ..... ..............................................................3
Declaration …………………......………………………………………………...3
Warranty………………………... ...…………………………………………3
Un-warranty Scope Description…………... ...…………………………………3
Contact Us………………………………... ...……………………………………3
RD-710F Control Mode List....................... ... ..... .......................................4
RD-710F Step.. .. .. .. .. ...... ...................... .. ... ..... .......................................4
Winding Connection Drawing.................... .. ... ..... .......................................5
Garage Door Winding Connection Drawing(General Type)………………...5
Elevator Winding Connection Drawing(2A1B Type)…………………………6
Elevator Winding Connection Drawing(3A1B Type)…………………………7
Elevator Winding Connection Drawing(4A Type)……………………………8
CE Caution Note (European Union).......... .. ... ..... .......................................9
FCC Consistent Declaration (U.S.A. Only). ... ..... ........................................9
WENSHING Confidential
Do Not Distribution

http://www.wenshing.com.tw ; http://www.rf.net.tw
RD-710F Instruction Manual P.3
Important Event
This product is in general use for the equipment on the premise of the development,
design, manufacture. Do not use that require high security purposes, such as
machinery or medical, aviation equipment, machinery and transport-related deaths
are directly or indirectly related to the system.
This product should be in this brochure by the instructions of the types and rated
voltage power under the current proper use. If violation of this statement by the
safety records of the supply operation, I am afraid our company cannot afford any
of the responsibility.
Do not self-decomposition, alteration, repair of the products also will cause fire,
electric shock, fault, and dangerous. In addition, their decomposition, alteration,
repair the product, failure is not within the scope of warranty.
The products are not waterproof, so please do not use and touch water. Take off
and on also please note. Rain, spray, drinks, steam, sweat may be a failure.
Use of this product, please be sure to use according to the statement recorded by
the use of methods to operate. Please do not violate particular attention to the
matter reminded to use.
Please respect this statement recorded by the note. When consumers in
contravention of this statement recorded note of the operation, I am afraid our
company could not shoulder any responsibility.
Products are defective, the Company will be responsible for free to amend the
flaws, or to the same flawless product or its equivalent products in exchange.
However, the Company does not assume based on the requirements of the flaw
and loss responsibility.
The Company reserves the right to retain without notice to users of the cases, the
product of hardware / software (version upgrade) is with the right to edit.
Declaration
This product provides different frequency for user selection to meet different
telecommunication regulation and FCC/CE on different countries.
Warranty
The warranty time is within one year from purchased date. The warranty scope are
used in normal situation and none vandalism. (Some function harmful out of warranty
scope and Vandalism are Un-warranty).
Un-warranty Scope Description
Because the natural disaster, accident or human factor to cause the bad damage.
Violate the product instruction manual to cause the damage of the products.
The improper assemble causes damage.
The products used the unsanctioned accessory to cause damaged.
Overstep the allowed used environment to cause the products damaged.
Contact Us
WENSHING ELECTRONICS CO., LTD.
No.82, Chong De St. 11054 Shin Yi Dist, Taipei, Taiwan
Tel: [phone]
Fax: [phone]
WENSHING Confidential
Do Not Distribution

http://www.wenshing.com.tw ; http://www.rf.net.tw
RD-710F Instruction Manual P.4
RD-710F Control Mode List
Remote Controller
Model No.
Dip Switch，Dial Code
Relay Mode
TX-FM04(B1B2)
4 ON
Roll-up door mode
2，4 ON
Lift Mode
1，4 ON
Automatically decrease mode
1，2，3 ON
Single point control
TX-FM04(OPEN,STOP)
4 ON
Roll-up door mode
2，4 ON
Lift Mode
1，4 ON
Automatically decrease mode
1，2，3 ON
Single point control
RD-710F Step
1. After you open box, please check whole accessories are complete.
(Host*1pcs, Remote controller *2pcs, Fix stand*1pcs, wire*1pcs)
2. Please check motor power supply to avoid danger.
3. Please put wire installed in the motor wiring plate according to the wiring
drawing on manual.
4. After fix the host on the wall, please connect the wire.
5. Motor voltage has 110V and 220V, please check voltage value on motor
and adjust the host power supply to the same voltage as motor power
supply.
6. Open motor power supply. If power function is normal, it is meaning you
finished assemble.
7. If it still has problem, please check following:
Wire connection is correct
Voltage is the same as motor
Dip code is the same.
8. If you still have problem on using, please contact disruptor.
WENSHING Confidential
Do Not Distribution

http://www.wenshing.com.tw ; http://www.rf.net.tw
RD-710F Instruction Manual P.5
Winding Connection Drawing
Garage Door Winding Connection Drawing(General Type)
WENSHING Confidential
Do Not Distribution

http://www.wenshing.com.tw ; http://www.rf.net.tw
RD-710F Instruction Manual P.6
Elevator Winding Connection Drawing(2A1B Type)
WENSHING Confidential
Do Not Distribution

http://www.wenshing.com.tw ; http://www.rf.net.tw
RD-710F Instruction Manual P.7
Elevator Winding Connection Drawing(3A1B Type)
WENSHING Confidential
Do Not Distribution

http://www.wenshing.com.tw ; http://www.rf.net.tw
RD-710F Instruction Manual P.8
Elevator Winding Connection Drawing(4A Type)
WENSHING Confidential
Do Not Distribution

http://www.wenshing.com.tw ; http://www.rf.net.tw
RD-710F Instruction Manual P.9
CE Caution Note (European Union)
Symbol of it accords with EMC regulation (89/336 / EEC) to represent this
device, and the low-voltage regulation of European Union (73/23/EEC). It
represents to follow the following standard regulations of European Union (The
bracket is a reciprocal international standard reciprocal international standard
and regulation).
EN 60950/A11: 1997/(IEC 60950/A4: 1996),The ones that includes
information science and technology of apparatus of e-commerce safe.
EN 55024: 1998 (IEC 1000-4-2, 1000-4-3, 1000-4-4, 1000-4-5, 1000-4-6,
1000-4-8, 1000-4-11) -' scientific and technological apparatus of information
- The characteristic of interfere avoided - Restrain and test method '
Chapter 2 -Static release (ESD) Demand
Chapter 3 -Radiate the static field demand
Chapter 4 -The electron is transmitted / produced and washed (EFT) fast
Demand.
Chapter 5 -surge demand
Chapter 6 -Resistance demand caused in field of wireless frequency.
Chapter 8 -Magnetic field demand of electric frequency.
Chapter 11 –Shortly cut off the demand of making a variation with the
voltage transiently under the voltage.
EN 55022:1998/(CISPR 22:1997) ,Class B, ' “To assess information scientific
and technological apparatus wireless restriction and way of interfering with the
characteristic.”
FCC Consistent Declaration ( U.S.A. Only)
Attention: FCC rule regulation, modified and changed must allowed by
WENSHING Electronics company, otherwise that would make you operate this
apparatus invalid. This apparatus adopted test, according to chapter 15 that
FCC regulation, accord with Class B digital restrictions of device. These limits
are designed to provide reasonable protection, avoid to having harmful
interference at home’s environment.
This device may have radiated wireless frequency energy. If don’t allow the
instruction manual, then may will interfere wireless communication. However,
there is no any way to guarantee, it will not be interfered in particular installed.
If this device really causes harmful interference, (It could be confirmed by
turning on or off this device.) Advise you to try to use the following ways
modifying the interference situation.
Relocation receiving antenna or altering its direction.
Increase the distance between device and receiver.
Please connect this device to the outlet in the circuit different from the
receiver.
The following manuals is published by Federal Communications
Commission, they must be helpful to all users.
How to Identify and Resolve Radio-TV Interference Problems. (This manual
can be obtained by relevant departments of publication of the U.S.
government.)
Government Printing Office, Washington D.C., 20402. Stock No.
004-00398-5
WENSHING Confidential
Do Not Distribution