Westgate DV48 User manual

Log Set Installation
DV48
SHERWOOD INDUSTRIES LTD
SHERWOOD INDUSTRIES IS AN ENVIRONMENTALLY RESPONSIBLE COMPANY. THIS MANUAL IS PRINTED ON RECYCLED PAPER.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
This publication is intended as a
guide for installers to help with the
assembly of the log set only.
Please refer to the Westgate DV48
Owner’s Manual for specic, detailed
and complete information on
installation and operation.

Log Set InStaLLatIon:
Logs have been numbered 1 through 10 (below) to assist in the log set assembly.
2
9
4
10
7
5
8
6
3
1
1
2
3
45
6
78
9
10

1. Install Log #1 (Right Rear). Place the pin on the left side of log #1 onto the groove on top of the
ember burner.
Groove
Pin
Log #1 in position
2. Install Log #2 (Left Rear). Place the groove on the left side of Log #2 onto the left side of the grate.
Groove
Position the groove on the right side of Log #1
onto the tab on the right side of the grate.
Tab
1
1
1
1
2
Groove
Grate
2

Log #3 in position
Wedge
Log #4 in position
3
3. Install Log #3. Log #3 sits inside the groove on
the burner.
3
4
4
4. Install Log #4. The groove on Log #4 ts into a
wedge on the burner.
Groove
Groove
Flat
Surfaces
2
1
The at surface on the right side of Log #2 sits on the
at surface in the center of Log #1.
Log #2 in position
2

5. Install Log #5. The left side of Log #5 sits on the
at surface of Log #3.
Log #5 in position
Log #6 in position
6. Install Log #6. The notch on the left side of Log
#6 hooks into the front of the re grate.
55
1
The right side of Log #5 sits on the grate.
56
6
6
3
Flat
Surface
Grate
Grate
Notch
The right side of Log #6 sits on the at surface on
Log #4.
Flat
Surface
4

Log #7 in position
77
2. Install Log #8. The notch on the bottom of Log #8 ts into the right side of the grate.
8
8
The top of Log #7 ts into the groove on Log #2.
2
Groove
Notch
Grate
7
7. Install Log #7. The angled notch on the bottom of Log #7 ts into the left corner of the grate.
Notch
7
Grate

8
8
8
Log #8 in position
9
10
9. Install Log #9. Log #9 sits on Log #5
10. Install Log #10. Log #10 sits on the front center section of the
grate with the bottom of the log sitting on the front burner accent.
The pin at the top of Log #8 ts into the groove of Log #1.
1
5
Groove
Pin

Completed Log Set