Westinghouse WSF6606XA User manual
USER MANUAL
DISHWASHER
WSF6606XA, WSF6606KXA
CONTENTS
ARNING
ARNING
TIPS & INFORMATION
ENVIRONMENTAL TIPS
2CONTENTS
WARNING
This symbol indicates information concerning your
personal safety.
CAUTION
This symbol indicates information on how to avoid
damaging the appliance.
IMPORTANT
This symbol indicates tips and information about use
of the appliance.
ENVIRONMENT
This symbol indicates tips and information about
economical and ecological use of the appliance.
Please read the user manual carefully and store in a handy
place for later reference.
The symbols you will see in this booklet have
these meanings:
CONGRATULATIONS
Dear customer,
Congratulations on the purchase of your new
Westinghouse dishwasher.
Before you use the dishwasher, we recommend that you
read through the whole user manual which provides the
description of the dishwasher and its functions.
To avoid the risks that are always present when you use
an electrical appliance, it is important that the dishwasher
is installed correctly and that you read the safety
instructions carefully to avoid misuse and hazards.
We recommend that you keep this instruction booklet
for future reference and pass it on to any future owners.
After unpacking the appliance, please check it is not
damaged. If in doubt, do not use the appliance but
contact your local Customer Care Centre.
For contact details, refer to the last page of this user
manual.
Conditions of use
This appliance is intended to be used in household
and similar applications such as:
• Staff kitchen areas in shops, offices and other
working environments
• Farm houses
• By clients in hotels, motels and other residential
type environments
• Bed and breakfast type environments
Please ensure you read the instruction manual fully
before you call for service, or a full service fee could
be applicable.
Record model and serial number here:
Model number:........................................................................................
Serial number:.........................................................................................
PNC:.............................................................................................................
2
IMPORTANT INFORMATION THAT MAY
IMPACT YOUR MANUFACTURER’S WARRANTY
Adherence to the directions for use in this manual
is extremely important for health and safety. Failure
to strictly adhere to the requirements in this manual
may result in personal injury, property damage
and affect your ability to make a claim under the
Westinghouse manufacturer’s warranty provided
with your product. Products must be used, installed
and operated in accordance with this manual. You
may not be able to claim on the Westinghouse
manufacturer’s warranty in the event that your
product fault is due to failure to adhere this manual.
CONTENTS
General warnings..................................................................................3
Safety instructions .............................................................................. 4
............................................................................5 Product description
Technical specifications ....................................................................5
Control panel ......................................................................................... 6
Program table
....................................................................................... 9
.......................................................................................10
................................................................................ ...............
14
Hints and tips
Installation
Preparing for use
Loading ..................................................................................................16
Maintenance and cleaning
............................................................20
Troubleshooting ................................................................................. 21
Warranty ................................................................................................ 22
11
Please read the user manual carefully and store in a handy
place for later reference. Pass the user manual on to
possible new owners of the appliance.
Read the following carefully to avoid damage or injury.
Note: You must read these warnings carefully
before installing or using the appliance. If you need
assistance, contact your Customer Care Department.
The manufacturer will not accept liability, should
these instructions or any other safety instructions
incorporated in this book be ignored.
Children and vulnerable people safety.
WARNING
WARNING
Risk of injury or permanent disability.
This appliance can be used by children aged from
8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved.
• Do not let children play with the appliance.
• Keep all detergents away from children.
• Keep children and pets away from the appliance door
when it is open.
• Cleaning and user maintenance shall not be made by
children without supervision.
GENERAL WARNINGS
WARNING
WARNING
It is important to use your appliance safely. Check these
safety points before using your appliance.
General Safety
• Do not change the specification of this appliance.
• Obey the maximum number of 15 place settings.
• If the supply cord is damaged, it must be replaced
by the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.
• Put knives and cutlery with sharp points in the cutlery
basket with the points down or in a horizontal position.
• Do not leave the appliance door open without
supervision to prevent causing a trip hazard.
• Before maintenance, turn the appliance off and
disconnect the plug from the mains.
• Do not use water spray and steam to clean the
appliance.
• The appliance is to be connected to the water mains
using the new supplied hose-sets. Old hose sets must
not be reused.
• The ventilation openings in the base (if applicable)
must not be obstructed.
• Some dishwasher detergents are strongly alkaline.
They can be extremely dangerous if swallowed. Avoid
contact with the skin and eyes and keep children
away from the dishwasher when the door is open.
• Check that the detergent receptacle is empty after
completion of the wash cycle.
Installation
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Do not install or use the appliance where the
temperature is less than 0°C.
• Obey the installation instruction supplied with the
appliance.
• Make sure that the appliance is installed below and
adjacent to safe structures.
SAFETY INFORMATION 3
•
•
4SAFETY INSTRUCTIONS
WARNING
WARNING
Risk of fire and electrical shock.
Electrical connection
• The appliance must be earthed.
• Make sure that the electrical information on the rating
plate is the same as the power supply. If not, contact
an electrician.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains plug
and to the mains cable. Should the mains cable
need to be replaced, this must be carried out by our
Authorised Service Centre.
• Connect the mains plug to the mains socket only at
the end of the installation. Make sure that there is
access to the mains plug after the installation.
• Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
Water connection
• Make sure not to cause damage to the water hoses.
Before you connect the appliance to new pipes or
pipes not used for a long time, let the water flow until
it is clean.
The first time you use the appliance, make sure that
there is no leakage.
SAFETY INSTRUCTIONS
WARNING
WARNING
Dangerous voltage
• If the water inlet hose is damaged, immediately
disconnect the mains plug from the mains socket.
Contact the Authorised Service Centre to replace the
water inlet hose.
Use
• Do not sit or stand on the open door.
• Dishwasher detergents are dangerous. Obey the
safety instructions on the detergent packaging.
• Do not drink and play with the water in the appliance.
• Do not remove the dishes from the appliance until the
program is completed. There can be detergent on the
dishes.
• The appliance can release hot steam if you open the
door while a program operates.
• Do not put flammable products or items that are wet
with flammable products in, near or on the appliance.
WARNING
WARNING
Risk of injury or suffocation.
Disposal
• Disconnect the appliance from the mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children and pets
to get closed in the appliance.
•
• Use the new water inlet hose supplied with your
machine, do not use an old machine’s hose.
•Run water through the new hose before
connecting.
W
WARNING
5PRODUCT DESCRIPTION
PRODUCT DESCRIPTION
1
2
5
6
3
98
7
4
10
11
1Worktop
2Upper spray arm
3Lower spray arm
4Filters
5Rating plate
6Air vent
7Rinse aid dispenser
8Detergent dispenser
9Lower basket
10 Upper basket
11
Super Active Drying2
TECHNICAL SPECIFICATIONS
MODEL WSF6606XA-freestanding
Capa ty 15place sett s 15place sett s
He t 850mm 850mm
He t hout worktop) 820mm 820mm
dth 598mm 598mm
Depth 598mm 570mm
Net ght 56kg 56kg
Electr y nput 220-240 V, 50 Hz 220-240 V, 50 Hz
Current 10 A 10 A
Total power 1900W 1900W
Water supply pressure
Water supply hot or cold water max. 60°C 10L/min hot or cold water max. 60°C 10L/min
WSF6606KXA-freestanding
CONTROL PANEL
6CONTROL PANEL
9 8 15 5
6
7
10 111
14 13
124
2.1
2
3
3.1
1. On/Off button
2. Program Selection Button
2.1. Program Indicators
3. Delay Button
3.1. Delay Indicator
4. Remaining Time Indicator
5. Start/Pause Button
6. Options Button
7. Select Button
8. Rinse Aid Indicator
9. Child Lock Indicator
10. Tablet Indicator
11. Half Load Indicator
12. Extra Hygiene Indicator
13. Extra Rinse Indicator
14. Extra Drying Indicator
15. Washing Step Indicators
a- Washing Step Indicator
b- Rinse Step Indicator
c- Drying Step Indicator
d- End Step Indicator
switch to 0 hour by using the delay
when the machine is paused.
Remaining Time Indicator
Programme flow can be monitored via the
Wash,Rinse, Dry, End indicators and
Remaining Time Indicator.
4. Start/Pause Button
Press the Start/Pause button to start the
programme. The wash lamp turns on and the
Remaining Time Indicator shows the
programme duration. It also indicates the
remaining time during the programme flow. If
you open the door of your machine when the
programme is running the duration of the
programme pauses, related washing step
indicator blinks.
5. Options Button
Options can be selected by pressing the
Options button repeatedly. The chosen
option will be indicated by a blinking LED.
6. Select Button
Select the option by pressing the Select
button. The LED for the chosen option will
then remain lit.
7. Rinse Aid Indicator
When the rinse aid level is low, the rinse aid
lack warning indicator turns on and you
should fill the rinse aid chamber.
8. Child Lock Indicator:
Child lock is activated/deactivated by pres-
sing select button (7) for about 3 seconds.
When it is activated, all leds blink and “CL” is
shown on Remaning Time Indicator (4) once.
When it is deactivated, all lamps and “CL”
blink twice. Child Lock indicator illumi-nates
while the Child Lock is active.
9. Tablet Indicator
Select the Tablet Detergent function when
using a combined detergent that contains
salt, rinse aid or other extras. The Tablet
Detergent Indicator will remain on for
as long as it is selected. This option will
change washing temperature and time.
11. Half Load Indicator
Select the Half Load function to choose which
area of the dishwasher contains dishes to be
washed. You can select both baskets, the
upper basket only, or the lower basket only.
Press the button until the symbol
corresponding to the basket
On/Off Button
Turn the machine on by pressing the On/Off
button.
2. Program Selection Button
Select a suitable programme by pressing the
Programme button. The selected prog-ram
indicator (2.1) will be on. For the details of
the programs refer to section Program Table.
3. Delay Button
You can delay the start time of the program-
me for 1-2...24 hours by pressing the delay
button (3) before the programme starts. The
delay indicator (3.1) will be on. If you want to
change the delay time,first press the Start/
Pause button and then the delay but-ton to
select a new delay time. To activate the new
delay time, press the Start/Pause button. To
cancel the delay, you need to
1.
CONTROL PANEL 7
CONTROL PANEL
containing the dishes to be washed
illuminates. The Half Load Indicator will
illuminate while this function is in
operation. Dishes placed in other areas
will not be washed.
12. Extra Hygiene Indicator
Select the Extra Hygiene function to
increase the wash temperature, for a
maximum hygiene washing operation.
The Extra Hygiene Indicator will
illuminate.
13. Extra Rinse Indicator
If Extra Rinse option is selected,
washing-rinsing steps will be added
into the selected program, so you can
ensure that your dishes will be
extracted cleaner and glosser.
14. Extra Drying Indicator
If Extra Drying option is selected, extra
heating and drying steps will be added
into the selected program, so you can
ensure that your dishes will be
extracted dryer.
15. Washing Step Indicators
The display will show the indicator
corresponding to the status of the
programme in operation. While the
Drying indicator is on, the machine will
remain silent with respect to the
programme you have selected for 15 to
100 minutes.
*Wash
*Rinse
*Dry
*End
NOTE: To save any program as
favourite program, press program
selection (2) and delay (3) buttons at
the same time. To select favourite
program, press program selection
button (2) for 3 seconds.
Changing a programme
If you would like to change the
programme when the machine is already
running.
Press the Start/
Pause button.
After the programme stops,
select your desired
programme via the
programme selection button.
Start the newly selected
programmeby pressing the Start/
Pause button.
The new programme will
resume the course of the old
programme.
Cancelling a programme
If you would like to cancel a
programme when it is running.
Press the Start/Pause
button for 3 seconds.
During cancellation, the End light
blinks. The machine discharges
the water inside it in about 30
seconds.
When the End light turns
on, switch your machine
off by pressing the On/
Off button.
NOTE: If you switch the machine to
off position after selecting the delay
time and the programme has started,
the delayed time is cancelled.
8CONTROL DESCRIPTIONS
CONTROL PANEL
Switching the Machine Off
Pull the plug out of the outlet. Turn
off the water tap.
Switch your machine off with the On/Off
button after the programme has ended and
the End light turns on.
NOTE: Do not open the door before
the programme ends.
NOTE: At the end of washing
programme, you can leave the door of
your machine ajar to hasten the drying.
NOTE: If the door of machine is
opened or power is cut off during
washing, the program-me will continue
when the door is closed or the power is
restored.
Buzzer Sound Control
(Model Depending)
To change the buzzer sound level,
follow the below steps:
1. Open the door and press Option (6)
and Select (7) buttons at the same
time for 3 seconds.
2. When sound setting is recognized,
buzzer gives a long sound and
machine will display last set level,
from “S0” to “S3”.
3. To decrease sound level press Select
button (7). To increase sound level,
press Options button (6).
4. To save the selected sound level,
turn off the machine.
’’S0’’ level means all voices are off.
Factory setting is “S3”.
Save Power Mode
To activate or deactivate save power
mode, follow the below steps:
1. Open the door and press Program
(2) and Option (6) buttons at the same
time for 3 seconds.
2. After 3 seconds, the machine will
display last Setting, “IL1” or “IL0”.
3. When Save Power Mode is activate
“IL1” will be displayed. On this mode,
inte-rior lights (if avaliable) will turn off
2 minutes after the door is opened, and
the machine will turn off 15 minutes
after any intervention in order to save
energy.
4. When Save Power Mode is
deactivated “IL0” will be displayed. If
Save Power Mode
is deactive, interior lights will be on as
long as the door is open, and the
machine will always be on unless it is
turned off by user. 5. To save the
selected setting, turn off the machine.
In factory setting, Save Power Mode is
ac-tive.
Natural Ion Tech (Model Depending)
This function provides extra hygiene to
the machine thanks to Ion Technology. It
oper-ates as an independent program.
This func-tion is activated by pressing
Options button (6) for 3 seconds in
ready state. At the end of 3 seconds,
“Ion” will be displayed which indicates
that Natural Ion Tech function is
activated. The button is released after
“Ion” is displayed. If there is no
intervention by user, 24 hours after
activation of Natural Ion Tech function, it
is automatically cancelled.
NOTE: If machine is turned off, Natural
Ion Tech function is cancelled.
NOTE: Natural Ion Tech function does
not work with any program.
NOTE: If Natural Ion Tech function is ac-
tive, Natural Ion Tech warning led lights up
like dimming during door is open.
9
PROGRAMS
Information for Test institutes
For all the necessary information for test performance; send an email to
[email protected] and provide the model and PNC number on the
rating plate.
PROGRAM TABLE
Programme Duration
(min) Description
Prewash 15 Suitable to rinse dishes that you plan to wash later.
Quick 30’ 30 Suitable for lightly soiled dishes and quick wash.
Delicate 40°C 74 Suitable for lightly soiled delicate dishes.
Eco 155 Standard program for normally soiled daily using dishes with
reduced energy and water consumptions.
Super 50’ 50 Suitable for normally soiled daily dishes with faster program.
Intensive 65°C 122 Suitable for heavily soiled dishes.
Auto 90 - 122 Auto program for heavily soiled dishes.
NOTE: THE PROGRAMME DURATION MAY CHANGE ACCORDING TO
THE AMOUNT OF DISHES, THE WATER TEMPERATURE, THE AMBIENT
TEMPERATURE AND SELECTED ADDITIONAL FUNCTIONS.
•Only use powder detergent for short programmes.
•Mini 14’ and Quick 30’ programs do not include drying.
•To assist drying, we recommend slightly opening the door after a cycle is
complete.
If one of program monitor lights is on and
start/pause light is flashing
• Your machine’s door is open, shut the door
to continue.
If the program won’t start
• Check if the plug is connected.
• Check your indoor fuses.
• Check that the water inlet tap is turned on.
• Check that you have closed the machine door.
• Check that you switched off the machine by
pressing the power on/off button.
• Check that the water inlet filter and the machine
filters are not clogged.
If the control light is off after a wash operation
• The power on/off button isn’t released yet.
If detergent residues are left in the detergent
compartment
• Detergent has been added when the detergent
compartment was wet.
• Large dishes have blocked the dispenser door.
If water is left inside the machine at the end of the
program
• The water drain hose is clogged or twisted.
• The filters are clogged.
• The program is not finished yet.
TIPS & INFORMATION
IMPORTANT
At the end of the program, water may still remain on the
sides and door of the appliance.
If the machine stops during a wash operation
• Power failure.
• Water inlet failure.
• Program is on standby mode.
If shaking and hitting noises are heard during
a wash operation
• Dishes are placed incorrectly.
• The spray arm is hitting the dishes.
If there are partial food wastes left on the dishes
• Dishes are placed incorrectly into the machine,
sprayed water did not reach related places.
• Basket overloaded.
• Dishes leaning against one another.
• Very small amount of detergent added.
• An unsuitable, rather weak wash program selected.
• Spray arm clogged with food waste.
• Filters clogged.
• Filters incorrectly fitted.
• Water drain pump clogged.
If there are white stains on the dishes
• A very small amount of detergent is being used.
• Rinse aid dosage setting at a very low level.
• Water hardness is very high.
If the dishes won’t dry
• A program without a dry operation selected.
• Rinse aid dosage set too low.
• Dishes unloaded too fast.
• Use a hotter program.
If there is rust on the dishes
• Stainless-steel quality of the dishes washed
is insufficient.
• High level of salt in the wash water.
• Unhealthy mains grounding.
Unloading the baskets
• For improved drying results with the most effective
use of energy, open the door approximately 10cm at
the end of the program.
• Allow the tableware to cool for 30-40 minutes as hot
items can easily be damaged.
• First remove items from the lower basket before
removing the items from the upper basket.
Call an authorised service if the problem still
persists after the controls or in case of any
malfunction not described above.
Useful Information
• Whenever you will not be operating your machine:
- Unplug the machine and then turn water off.
- Leave the door slightly ajar in order to prevent the
formation of unpleasant smells.
• Keep the machine interior clean.
• Correct loading of dishes in the machine, enables
reduced energy consumption and improved washing
and drying performance.
• Remove all large food remnants before you placing
dirty dishes into the machine.
• Operate the machine after it is completely full.
• If the appliance is located in a place where the risk of
freezing exists, you must completely drain the water
that has remained in the machine. Turn off the water
tap, disconnected the water inlet hose from the tap
and allow the interior water to drain.
HINTS AND TIPS
HINTS AND TIPS
10
ARNING
ARNING
ARNING
INSTALLATION
11
INSTALLATION
Positioningthemachine
Waterconnection
Waterinlethose
NOTE: A water tempering valve is required if the water
temperature is over 60°C.
C AUTION
Alwaysusenewhoseswhenyouconnectthe
appliancetothewatersupply.Oldhosesmust
notbeused.Thewaterinlethosemustbe
examinedatanintervaloftwelvemonthsfor
deteriorationandreplacedifnecessary.
Inordertopassthesafetyvalvethroughthe
kitchencabinets,anopeningofatleast45mmx
90mmisneeded.
WARNING
NOTE: Aquastop inlet hose has
components using 240V. Do not
cut Aquastop inlet hose. Do not let
it get folded, twisted, kinked
or crushed.
NOTE: A water tempering valve is
required if the water temperature
is over 60°C.
•The rst time you use the appliance, make sure
that there is no leakage.
•The water inlet hose has a safety valve and a
sheath with an inner mains cable.
•After the connections are made, the tap should be
turned on fully and checked for water tightness.
For the safety of your machine, make sure to
always turn o the water inlet tap after each wash
program is nished.
WARNING
WARNING
Onlyturnthelockingnuttosecurehose–
donotturnthehose, do not use any
tools. Align tab with nut, hold water inlet
hose and tighten nut by hand only
WARNING
INSTALLATION
12
Waterdrainhose
Waterdrainhose
WARNING
Maximumdrainhoselengthis4m.Longerhose
lengthwillpreventcorrectdraining,
andresultinpoorwashperformance.
ElectricalConnection
Fittingthemachineundercounter
WARNING
INSTALLATION
ARNING
ARNING
INSTALLATION 13
1
2
3
4
5
INSTALLATION
WARNING
4.
5.
PREPARING FOR USE
Detergent usage
Use a detergent specifically designed for use in domestic
dishwashers. You can find powder, gel and tablet
detergents in the market that have been designed for
household dishwashers. Detergent should be put into the
compartment prior to starting the machine. Keep your
detergents in cool, dry places out of reach of children.
Do not fill detergent into the detergent compartment
more than required; otherwise it may cause scratches
on your glasses as well as lead to a poorly dissolved
detergent. Should you need more information
concerning the detergent you will use, contact
detergent manufacturers directly.
PREPARING FOR USE
Combined detergent
Detergent manufacturers also produce combined
detergents called “2 in 1”, “3 in 1” or “5 in 1” etc. “2 in 1”
detergents contain detergent + rinse aid. When using
“2 in 1” detergents make sure to check the specifications
of the tablet.
Other tablet detergents contain detergent + rinse aid
+ various extra functions.
Generally, combined detergents produce suitable results
under certain usage conditions only.
These detergents contain rinse aid and/or other additives
in preset amounts.
Points to consider when using these type of
products:
• Always make sure to check the specifications of
the product you will use or whether or not it is a
combined product.
• Check if the detergent used is appropriate for the
hardness of mains water that machine relates to.
• Observe the instructions on packaging when using
such products.
• If such detergents are in the form of tablets, never
put them into the interior section or the cutlery
basket of the dishwasher. Always put the tablets
into the detergent compartment in the detergent
dispenser.
• They produce good results for certain types of usage
only. If you are using this type of detergent, you need
to contact the manufacturers and find out about the
suitable conditions of use.
• When the conditions of use of such products and the
machine settings are appropriate, they ensure savings
in salt and/or rinse aid consumption.
• Contact the detergent manufacturer if you are not
obtaining good wash results (if your dishes stay
calcareous and wet) after having used 2 in 1 or 3 in 1
detergents. The scope of warranty for your machine
does not cover any complaints caused by the use of
these types of detergents.
Recommended usage:
For better results while using combined detergents,
add rinse aid into your machine and adjust the rinse aid
setting to the lowest position.
You may have to add more detergent into your machine,
depending on the degree of soil and the water hardness
in your area.
If your dishes are from the previous day and there is
dried food waste on them, or if you have fully loaded the
dishwasher, pour 5cm3detergent onto the base of the
door and start your machine.
INSTALLATION
14
Filling the detergent compartment
CLICK
Push the button to open the detergent
compartment as shown above.
The detergent compartment has level lines inside to
make it possible to dose the correct amount of
detergent.
The capacity of the detergent compartment is 40cm3.
Follow detergent manufacturer’s instructions to add
correct amount of detergent depending on the type
and soil level of the dishes.
To close the detergent compartment push
the cover as shown until you hear a click and
the cover locks.
PREPARING FOR USE
PREPARING FOR USE
W
ARNING
CAUTION
Solubility of the tablet detergents produced by different
companies can vary depending on the temperature
and time. Therefore, it is not recommended to use such
detergents in short programs. It is more suitable to use
powder detergents in such programs.
Should any problem, which you have not encountered
before, arise with the use of this type of detergents,
contact the detergent manufacturers directly.
When you give up using combined detergents
• Fill the rinse aid compartment.
• Set the suitable rinse aid setting.
Filling with rinse aid and making the setting
To fill the rinse aid compartment, open the rinse-aid
compartment cap.
Fill the compartment with rinse aid until MAX level
and then close the cap.
Be careful not to overfill the rinse aid compartment
and wipe up any spills.
In order to set rinse aid level, follow below steps:
ARNING
CAUTION
Use only those rinse aid materials which are allowed for
use in the machine. As rinse aid residues left as a result of
overflowing will create extremely high amounts of foam
and thus reduce the washing performance, remove the
excess amount of rinse aid by wiping it with a paper towel
or cloth.
RINSE-AID
15
•Turn on the machine by pressing On/
Off button.
• Press Program button at least for 5”
immediately after machine is turned
on.
• Release Program button when “rA” is
shown. Rinse aid level setting follows
water hardness level setting. Next, the
last setting level is viewed.
• Set the level by pushing the program
button.
• Switch off the machine to save the
setting.
• The factory setting is “4”.
If the dishes are not drying properly or
are spotted, increase the level. If blue
stains form on your dishes, decrease level.
Level Brightener Dose Indicator
1 Rinse-aid not
dispensed r1 is shown on the
display.
2 1 dose is dispensed r2 is shown on the
display.
3 2 doses are
dispensed r3 is shown on the
display.
4 3 doses are
dispensed r4 is shown on the
display.
5 4 doses are
dispensed r5 is shown on the
display.
LOADING YOUR DISHWASHER
16
LOADING YOUR DISHWASHER
If your dishes are correctly placed in the dishwasher,
you will be using it in the best way in terms of energy
consumption, washing and drying performance.
There are two separate baskets for you to load your
dishes into your machine. You can load into the lower
basket such round and deep items as pots with long
handles, pot lids, plates, salad plates, cutlery sets.
The upper basket has been designed for tea plates,
dessert plates, salad bowls, cups and glasses. When
placing long-stem glasses and goblets, lean them against
the basket edge, rack or glass supporter wire and not
against other items. Do not lean long glasses against
one another or they wont remain steady and can be
damaged.
It is recommended that thin narrow items be placed into
the middle sections of baskets. You can place spoons
among the other cutlery sets in order to prevent them
from sticking to one another, use the cutlery grid in order
to obtain the best result.
To avoid any possible injuries, always place long-handle
and sharp-pointed dishes such as serving fork or bread
knife with their sharp points facing down or horizontally
on the baskets.
CAUTION
Place your dishes into your machine in a way that they
will not prevent the upper and lower spray arms from
spinning.
Top basket cup rack
Height Adjustable Rack
These racks are designed to increase the capacity of the
top basket. You can place your glasses and cups on the
racks. You can adjust the height of these racks. Thanks to
this feature, you can place different sizes of glasses under
these racks.
Thanks to height adjustment plastics mounted on the
basket, you can use your racks in two different heights.
In addition, you can place long forks, knives and spoons
on these racks laterally, so that they do not block the
revolution of propeller.
Upperbasketheightadjustmentwhileitisfull
1 2
ARNING
Alternative basket loads
Lower Basket
Top Basket
LOADING YOUR DISHWASHER
LOADING YOUR DISHWASHER 17
LOADING YOUR DISHWASHER
18
Four Folding Racks
The folding racks are designed so that large items,
such as pots and pans, can be easily placed in the
dishwasher. Each section can be folded separately.
The racks can be folded down or raised up, as shown
in the images below.
LOADING YOUR DISHWASHER
a
b
c
d
1
2
TIPS & INFORMATION
IMPORTANT
Examples of incorrect loading
Top Basket
Alternative basket loads Lower Basket
* Illustration only
LOADING YOUR DISHWASHER
LOADING YOUR DISHWASHER 19
TIPS & INFORMATION
.
MAINTENANCE AND CLEANING
MAINTENANCE AND CLEANING
IMPORTANT
Cleaning the machine in regular intervals prolongs the
machine’s service life.
Oil and lime may accumulate in the machine’s
washing section. In case of such accumulation;
• Fill the detergent compartment without loading
any dishes into the machine, select a program that
runs at high temperature, and start the machine. If
this is ineffective, use a specialty dishwasher cleaner
available from most supermarkets.
Cleaning the seals in the machine door
• To clean any accumulated residues in the door seals,
wipe the seals regularly by using a dampened cloth.
Cleaning the machine
• Clean the filters and spray arms at least once a week.
• Unplug your machine and turn off its tap before
starting the cleaning.
• Do not use hard materials when cleaning your
machine. Wipe with a fine cleaning material and a
dampened cloth.
Spray arms
Check whether or not the holes for the upper and lower
spray arms are clogged. If there is any clogging, remove
the spray arms and clean them under water.
You can remove the lower spray arm by pulling it
upwards, while the upper spray arm nut can be removed
by turning the nut to the left.
Be sure that the nut is perfectly tightened when refitting
the upper spray arm.
Hose filter
Water is stopped by the inlet hose filter to avoid any
damage to your machine because of any contamination
(sand, clay, rust etc.) that might be occasionally carried in
through the mains water supply or the indoor plumbing,
and to forestall such issues as yellowing and formation
of deposits after washing. Check the filter and the hose
from time to time and clean them if necessary. To clean
the filter, first turn off your tap and then remove the hose.
After removing the filter from the hose, clean it under the
tap. Insert the cleaned filter back into its place inside the
hose. Refit the hose.
20
Cleaning the filters
• Check if any food wastes have remained on the
coarse and fine filters.
• If any food wastes are left, remove the filters and
clean them thoroughly under the water tap.
aMicro Filter
bCoarse Filter
cMetal/Plastic Filter
To remove and clean the filter combination, turn it counter
clockwise and take it out by lifting upwards. 1
Pull and remove the metal/plastic filter. 3
Then pull the coarse filter out of the micro filter. 2
Rinse it with lots of water under the tap. Refit the
metal/plastic filter. Insert the coarse filter into the micro
filter in away that the marks will correspond to one
another. Attach micro filter into the metal/plastic filter
and turn to the direction of arrow and it is locked when
the arrow on micro filter can be seen from across. 4
•Never use your dishwasher without any filter.
•
•
•
Incorrect fitting of the filter will reduce the washing
effectiveness.
Clean filters are very important in terms of the proper
running of the machine.
Check the bottom area of the dishwasher for any pieces
of broken glass or other hard objects before any filters
are removed.
This manual suits for next models
1
Table of contents
Other Westinghouse Dishwasher manuals
Westinghouse
Westinghouse SB926SL Manual
Westinghouse
Westinghouse WSF6604WA User manual
Westinghouse
Westinghouse WDF901 User manual
Westinghouse
Westinghouse WSF6604WA User manual
Westinghouse
Westinghouse 930 Fully Integrated Guide
Westinghouse
Westinghouse WSF6725I User manual
Westinghouse
Westinghouse WSF67251 User manual
Westinghouse
Westinghouse WSF6605 User manual
Westinghouse
Westinghouse WSU6603 User manual
Westinghouse
Westinghouse WSF6608 User manual
Westinghouse
Westinghouse 907 series Guide
Westinghouse
Westinghouse WSF6602 User manual
Westinghouse
Westinghouse SC400L Parts list manual
Westinghouse
Westinghouse WSU67381 User manual
Westinghouse
Westinghouse WDF901SA User manual
Westinghouse
Westinghouse SB908 User manual
Westinghouse
Westinghouse WSF6606 User manual
Westinghouse
Westinghouse WSF6602WA User manual
Westinghouse
Westinghouse WSF6606X User manual
Westinghouse
Westinghouse WSF6608 User manual
