Westinghouse WFB2804S User manual

2
Safety for children and others
who are vulnerable people
instructions as the
manufacturer is not
responsible for damages
caused by omission.
This appliance is not
intended for use by persons
(including children) with
reduced physical, sensory
or mental capabilities, or
lack of experience and
knowledge, unless they
have been given
supervision or instruction
concerning use of the
appliance by a person
responsible for their safety.
Children should be
supervised to ensure that
they do not play with the
appliance.
Keep all packaging away
For your safety and correct
usage, before installing and
first using the appliance, read
this user manual carefully,
including its hints and
warnings. To avoid
unnecessary mistakes and
accidents, it is important to
make sure that all people
using the appliance are
thoroughly familiar with its
operation and safety
features. Save these
instructions and be sure that
they remain with the
appliance if it is moved or
sold, so that anyone using it
throughout its life, will be
properly informed on its
usage and safety notices.
For the safety of life and
property, keep the
precautions of these user's
Safety and warning information_ __ _ _ _ _
Description of the appliance_ _ _ _ _ _ _ _
Installing your new appliance_ _ _ _ _ _ _
Display controls_ _ _ _ _ _ _ _ _ _ _ _ _ _
Reversing the door _ _ _ _ _ _ _ _ _ _ _ _
8
2
9
12
Helpful hints and tips
Cleaning and care
Troubleshooting
Disposal of the appliance
Using your appliance
13
14
15
_
_
_
_
_
_
_
_
_
_ _
_
_
_
_
_
_
_
_ 15
16
18
Warranty _ _ _ _ _ _ _ _ _ _ 19

3
from children as there is risk
of suffocation.
If you are discarding the
appliance, pull the plug out
of the socket, cut the
connection cable (as close
to the appliance as you can)
and remove the door to
prevent children playing
from suffering an electric
shock or from closing
themselves inside it.
If this appliance, featuring a
magnetic door seals, is to
replace an older appliance
having a spring lock (latch)
on the door or lid, be sure to
make the spring lock
unusable before you
discard the old appliance.
This will prevent it from
becoming a death trap for a
child.
General safety
This appliance is
designed and intended to
be used in normal
domestic applications
only.
WARNING — Do not
store explosive
substances such as
aerosol cans with a
flammable propellant in
this appliance.
WARNING — If the
supply cord is damaged,
it must be replaced by the
manufacturer, its service
agent or similarly
qualified persons in order
to avoid a hazard.
WARNING — Keep
ventilation openings, in
the appliance enclosure
or in the built-in structure,
clear of obstruction.
WARNING — Do not use
mechanical devices or
other means to
accelerate the defrosting
process, other than those
recommended by the
manufacturer.
WARNING — Do not
damage the refrigerant
circuit.
WARNING — Do not use
electrical appliances
inside the food storage
compartments of the
appliance, unless they
are of the type
recommended by the
manufacturer.

4
1.
be lengthened.
2. Make sure that the power
plug is not or
damaged. A or
damaged power plug may
overheat and cause a fire.
3. Make sure that you can
plug of the
appliance.
4. Do not pull the main
cable.
5. If the power plug socket
is loose, do not insert the
power plug. There is a risk
of electric shock or fire.
6.You must not operate the
appliance without the
interior lighting lamp cover.
7.The fridge is only applied
with power supply of single
phase alternating current of
220~240V/50Hz. If
fluctuation of voltage in the
district of user is so large
that the voltage exceeds the
above scope, for safety
sake, be sure to apply A.C.
Automatic voltage regulator
of more than 350W to the
fridge. The fridge must
The power cord must not
crushed
crushed
access the main
Electrical safety
WARNING — The
refrigerant and insulation
blowing gas are
flammable. When
disposing of the
appliance, do so only at
an authorized waste
disposal centre. Do not
expose to flame.
R600a refrigerant
warning
This appliance contains
flammable R600a refrigerant.
Avoid safety hazards by
carefully installing, handling,
servicing and disposing of this
appliance.
The room for installing
appliance must be at least1m3
per 8g of refrigerant. The
amount and type of refrigerant
in the appliance can be found
on the rating plate inside the
appliance.
Any damage to the cord
may cause a shortcircuit,
fire, and/or electric
shock.
If the refrigerant circuit
should be damaged:
-Avoid opening flames
and sources of ignition.
-Thoroughly ventilate the
room in which the
appliance is situated.
It is dangerous to alter the
specifications or modify
this product in any way.
Caution:risk of fire

employ a special power
socket instead of common
one with other electric
appliances. Its plug must
match the socket with
ground wire.
Do not store flammable
gass or liquids in the
appliance,There is a risk
of an explosion.
Do not operate any
electrical appliances in
the appliance(e.g.electric
ice cream makers,mixers
etc.).
When unplugging always
pull the plug from the
mains socket,do not pull
on the cable.
Do not place hot items
near the plastic
components of this
appliance.
Do not place food
products directly against
the air outlet on the rear
wall.
Store pre-packed frozen
food in accordance with
the frozen food
manufacture’s
instructions.
The appliances
manufactures storage
recommendations should
be strictly adhered
to.Refer to relrelevant
Daily use
instructions for
Do not place carbonated
or fizzy drinks in the
freeze compartment as it
creates pressure on the
container,which may
cause it to
explode,resulting in
damage to the appliance.
Keep buring
candles,lamps and other
items with naked flames
away from the appliance
so that do not set the
appliance on fire.
The appliance is intended
for keeping food stuff
and/or beverages in
normal household as
explained in this
instruction booklet The
appliance is heavy.Care
should be taken when
moving it.
Do not remove nor touch
items from the freezer
compartment if your
hands are damp/wet,as
this could cause skin
abrasions or frost/freezer
burns.
storage.
Frozen food can cause
frost burns if consumed
straight from the freezer
compartment.
Do not place the
appliance in direct
sunlight.
Never use the base,
5

Report possible damages
immediately to the place
you bought it. In this case
retain packing.
It is advisable to wait at
least four hours before
connecting the appliance to
allow the oil to flow back in
the compressor.
Adequate air circulation
should be around the
appliance, lacking this leads
to overheating. To achieve
sufficient ventilation, follow
the instructions relevant to
installation.
Wherever possible the back
of the product should not be
too close to a wall to avoid
touching or catching warm
parts (compressor,
condenser) to prevent the
risk of a fire, follow the
instructions relevant to
installation.
The appliance must not be
locate close to radiators or
cookers.
Make sure that the mains
plug is accessible after the
installation of the appliance.
For electrical connection
carefully, follow the
instructions given in this
manual.
Unpack the appliance and
check if there are damages
on it. Do not connect the
appliance if it is damaged.
drawers, doors etc. to
stand on or as supports.
Frozen food must not be
refrozen once it has been
thawed out.
Do not consume ice
popsicles or ice cubes
straight from the freezer
as this can cause freezer
burn to the mouth and
lips.
Installation Important!
caution!
Care and cleaning
Before maintenance, switch
off the appliance and
disconnect the mains plug
from the mains socket.
Do not clean the appliance
with metal objects, steam
cleaner, ethereal oils,
organic solvents or abrasive
cleansers.
Do not use sharp objects to
remove frost from the
appliance. Use a plastic
scraper.
6
Choose a location for your
refrigerator that isn’t too cold.
The ambient room temperature
should be above 10°C.
Don’t put the refrigerator in
frosty or unprotected areas like
a garage or on the verandah.

Service
serviced by an authorized
Service Center, and only
genuine spare parts must
be used.
1)If the appliance is Frost
Free.
2)If the appliance contains
freezer compartment.
Any electrical work required
This product must be
to do the servicing of the
appliance should be carried
out by qualified electrician
or competent person.
7

Stand your appliance in a dry place to
avoid high moisture.
Keep the appliance out of direct
sunlight，rain or frost. Stand the
appliance away from heat sources
such as stoves, fires or heaters.
●
●
It may not work properly if being left at
a temperature above or below the
indicated range for a long period.
Installing your new appliance
Before using the appliance for the first
time, you should be informed of the
following tips.
Ventilation of appliance
In order to improve efficiency
of the cooling system and
save energy, it is necessary to
maintain good ventilation around the
appliance for the dissipation of heat.
For this reason, sufficient clear space
should be available around the
refrigerator.
Suggest :It is advisable for there to be
at least 75mm of space from the back
to the wall, at least 100mm from its
top,at last 100mm from its side to the
wall and a clear space in front to allow
the doors to open 135°. As shown in
following figures.
Note:
This appliance performs well within
the climate class from showed
in the table below.
SN to T
●
Leveling of appliance
For sufficient leveling and air
circulating in the lower rear section of
the appliance, the bottom feet may
need to be adjusted. You can adjust
them manually by hand or by using a
suitable spanner.
To allow the door to self-close, tilt the
top backwards by about 10mm.
●
●
Symbol Ambient Temperature
range()°C
SN
N
ST
T
+10 to +32
+16 to +32
+16 to +38
+16 to +43
Class
Extended
Temperate
Temperate
Subtropical
Tropical
8
10mm
≤

The side at which the door opens can
be changed, from the left side (as
supplied) to the right side, if the
installation site requires.
Warning! When reversing the door, the
appliance must not be connected to the
mains. Ensure that the plug is removed
from the mains socket.
Tools you will need:
8mm socket wrench Cross-shaped screwdriver
3mm allen wrench
Thin-blade screwdriver
Note: Before you start lay the
refrigerator on its back in order to
gain access to the base, you should
rest it on soft foam packaging or
similar material to avoid damaging
the backboard of the refrigerator. To
reverse the door, the following steps
are generally recommended.
1. Stand the refrigerator upright.
2. Remove part ① and part ② from
the refrigerator body, and then take
down part ③ on the door in the same
way. Remove the part screws ④,then
take off part ⑤ as the picture below.
Note: Please hold the freezer door by hand
during step 2 to prevent door dropping.
9
3. Take off the door ① and place it
on smooth surface with panel upwards.
Screw out the hinge axis ②(include
washer) as show figure Ⅱ and Ⅲ
，and then turn the upper hinge
fixed board ③ over as show figure
Ⅳ . Finally fix part ②on part ③ as
show figure Ⅴ and Ⅵ,then place it at
side for use.
Ⅳ
Ⅲ
Ⅵ
Ⅴ
Ⅱ
Ⅰ
①
③
②
①
②
④① Upper hinge cover
② Top cover block
③
④
⑤
Cover plate
Special flange self-
tapping screw
Upper hinge part
③
⑤

5. Place refrigerator flatwise, remove
part③ and then loose screws④.
Remove part ② and part①as the
picture.
4.Lever handle covers ① and loose
screws ②, remove the handle ③ as
show figure Ⅰ,then place it at side
for use. Take the screw hole covers ④
down as show figure Ⅱ, and install
them in the right side as show figure
Ⅲ. Change handle to left, install it as
show figure Ⅳ. Detach door stopper
⑤ and limit block ⑥ and then install
door stopper and limit block to right as
show figure Ⅴ and Ⅵ.
① Handle covers ② Screws
③ Handle ④ Screw hole covers
⑤ Door stopper ⑥ Limit block
⑦ Self-tapping screws
6. Screw out lower hinge axis, change
it to the near hole site as the picture
below, and then screw up and mount
washer as the picture below.
③
④
①
②
① Left Lower hinge part ② Front foot fixed board
③ Adjustable bottom feet part ④ special flange self-tapping screw
8. Take off the part ①, place it at side
for use as show figure Ⅰ. Move the
freezer door to appropriate position,
adjust part ② and door, then fix part
② by screws as show figure Ⅱ.
(Please hold the door by hand when
installing). Fix the part ③ as show
figure Ⅱ(which is in the plastic bag) .
Reverse part ① by 180°and install it
onto the left corner of the door as
show figure Ⅲ. Finally mount part ④
as show figure Ⅳ.( which was taken
down in step 2)
9.Finally install part ① and part ②
(both of which are taken down in step
2) in the refrigerator body as the
picture below.
Ⅱ
④
Ⅰ
③②
①
Ⅳ
⑥⑦
⑤
Ⅴ
Ⅵ
Ⅲ
①②
7.Just remount to the step 5,change
part① to right and part② to left and
then fix them with screws④. Finally
install part③.
Note: washer may
stick to the door.
washer
hinge axis
Ⅱ②③
④
Ⅳ
Ⅲ
①
Ⅰ