Westinghouse WWF1284 User manual

Model: WWF1284
Washing Machine

CONTENTS
CUSTOMER CARE AND SERVICE
2
SAFETY INFORMATION
PRODUCT DESCRIPTION
CONTROL PANEL
BEFORE FIRST USE
DAILY USE
WASHING HINTS
INTERNATIONAL WASH CODE SYMBOLS
CARE AND CLEANING
TROUBLESHOOTING
................................................................................... 3
................................................................................ 6
............................................................................................ 7
...................................................................................... 12
..................................................................................................... 12
............................................................................................ 18
.................................................... 21
................................................................................... 22
..................................................................................... 25
1
2
3
4
5
6
7
8
9
TECHNICAL DATA ......................................................................................... 2810
INSTALLATION ............................................................................................... 2911
ENVIRONMENT CONCERNS ......................................................................... 3412
WARRANTY .................................................................................................... 3513
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
Environmental information.
Subject to change without notice.
Warning / Caution-Safety information.
General information and tips.

SAFETY INFORMATION
3
In the interest of your safety and to ensure the correct use, before
installing and first using the appliance, read this user manual care-
fully, including its hints and warnings.
This appliance is intended to be used in household and similar
applications such as:
Farm houses
By clients in serviced apartments, holiday apartments and
residential type environments.
CONDITIONS OF USE
To avoid unnecessary mistakes and accidents, it is important to
ensure that all people using the appliance are thoroughly familiar
with its operation and safety features.
Save these instructions and make sure that they remain with the
appliance if it is moved or sold, so that everyone using it through its
life will be properly informed on appliance use and safety.
1.1 GENERAL SAFETY
Make sure that small pets do not climb into the drum. To avoid this,
please check into the drum before using the appliance.
Any objects such as coins, safety pins, nails, screws, stones or any other
hard, sharp material can cause extensive damage and must not be placed
into the machine.
Only use the advised quantities of fabric softener and detergent. Damage
to the fabric or appliance can occur if you overfill. Refer to the
manufacturer’s recommendations of quantities.
Wash small items such as socks, laces, washable belts etc in a washing
bag or pillow case as it is possible for such items to slip down between the
tub and the inner drum.
1.
It is dangerous to alter the specifications or attempt to modify this product
in anyway.
During high temperature wash program the door glass may get hot.
Do not touch it!

4
Do not use your washing machine to wash articles with whalebones,
material without hems or torn material.
Always unplug the appliance and turn off the water supply after use, clean
and maintenance.
This appliance is heavy. Care should be taken when moving it.
When unpacking the appliance, check that it is not damaged. If in doubt,
do not use it and contact the Service Centre.
All packing and transit bolts must be removed before use. Serious damage
can occur to the product and to property if this is not adhered to. See
relevant section in the user manual.
After having installed the appliance, check that it is not standing on the
inlet and drain hose and the worktop is not pressing the electrical supply
cable.
If the machine is situated on a carpeted floor, please adjust the feet in
order to allow air to circulate freely.
Always be sure, that there is no water leakage from hoses and their
connections after the installation.
Any plumbing work required to install this appliance should be carried out
by a qualified plumber.
Any electrical work required to install this appliance should be carried out
by a qualified electrician.
Under no circumstances should you attempt to repair the machine
yourself. Repairs carried out by inexperienced persons may cause injury or
serious malfunctioning. Contact your local Service Centre. Always insist on
genuine spare parts.
1.2 INSTALLATION
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.

This washing machine is not intended for use by young children or infirm
persons without supervision.
Young children should be supervised to ensure that they do not play with
the appliance.
The packaging components (e.g. plastic film, polystyrene) can be dangerous
to children - danger of suffocation! Keep them out of children’s reach.
Make sure that children or pets do not climb into the drum.
Keep all detergents in a safe place out of children’s reach.
This appliance is designed for domestic use. It must not be used for
purposes other than those for which it was designed.
Only wash fabrics which are designed to be machine washed. Follow the
instructions on each garment label.
Do not overload the appliance. See the relevant section in the user manual.
Before washing, ensure that all pockets are empty and buttons and zips are
fastened. Avoid washing frayed or torn articles and treat stains such as
paint, ink, rust, and grass before washing. Underwired bras must NOT be
machine washed.
Garments which have been in contact with volatile petroleum products
should not be machine washed. If volatile cleaning fluids are used, care
should be taken to ensure that the fluid is removed from the garment before
placing in the machine.
Never pull the power supply cable to remove the plug from the socket;
always take hold of the plug itself.
Never use the washing machine if the power supply cable, the control panel,
the working surface or the base are damaged so that the inside of the
washing machine is accessible.
1.3 USE
1.4 CHILD SAFETY
5

PRODUCT DESCRIPTION2.
1
Worktop
2
Detergent/Softener Dispenser
3
Control Panel
4
Door Handle
5
Door
13
Rating Label
14
Drum Leaf Lifter
7
6
Level Adjustment Feet (Front)
8
Mains Cable
9
Water Inlet Hose
10
Water Drain Hose
11
Hose Support (2pcs)
12
Level Adjustment Feet (Back)
Transit Bolts (3pcs)
6
To remove the transit
bolts.
To adjust levelling legs.
To connect the drain
hose on the edge of a
sink.
Plastic caps
To close the holes on
the rear side of the
cabinet after the
removal of the transit
bolts.
ACCESSORIES
Plastic hose guide
Spanner
3
4
5
7
2
1
12
6
9
8
13
14
11
10

CONTROL PANEL3.
1
On/Off Button
2
3
4
1 2 3 9 104 5 7 6 8
On/Off button is used to turn on
and turn off your washing
machine.
Program Touchpad ( )
Press this touchpad to select the
washing program. The relevant light
will light up. (For more information
about washing programs, please
see page 10)
Temperature Touchpad ( )
7
Press this touchpad repeatedly to
increase or decrease the wash
temperature if you want your
laundry to be washed at a
temperature different from the one
proposed by the washing machine.
Spin Touchpad ( )
Press this touchpad repeatedly to
increase or decrease the spin speed,
if you want your laundry to be spun
at a speed different from the one
proposed by the washing machine.
The relevant light will light up.
This option eliminates all the spin
phases and increases the number
of rinses.
No Spin
By selecting this option the water of
the last rinse is not emptied out and
the drum turns regularly to prevent
the laundry creases. The door is still
locked to indicate that the water
must be emptied out.
Rinse Hold
Different temperatures can be
combined which is dependent
on the program selected.
Different spin speed can be
combined which is dependent
on the program selected.
3.1 Control Panel Description
The relevant light will light up.
The door stays locked with the
water in the drum. To drain
the water refer to relevant
paragraph on page 16.

5
8
Settings Touchpad ( )
Press this touchpad, if you want
your laundry to be washed with
special functions.
The relevant light
will light up.
With this option you can decrease
the program duration.
Use this option for items with light
soil or items to refresh.
Time Save
Use this option if your clothes are
heavily soiled. The washing cycle
lasts longer with this option.
Heavy Duty
When selecting this option the
laundry is gently washed and spun
to avoid creasing. In this way
ironing is easier.
The appliance decreases the spin
speed, uses more water and
adapts the program duration
to the type of laundry.
Easy Iron
This option performs the final rinse
stage of the selected wash program.
Rinse Plus function “ ” can also
be selected to add more rinses.
Rinse & Spin
Use this option for very wet clothes
to remove the water and spin.
If “No Spin” is selected, appliance
will only drain.
Drain & Spin
Different options can be
combined which is dependent
on the program selected.
This option will reduce the
working time and the number
of rinses.
If you need to add more rinse
phases, press “ ” + “ ” at
the same time to add “Rinse
Plus” option. (see page 9)
Delay End Touchpad ( )
Before you start the program, this
option makes it possible to define
the end of the washing program
from minimum 3 hours to maximum
20 hours.
If program duration is longer
than 3 hours minimum Delay
End option starts from 4 hours.
For example, if the program duration
of your selected program is 3.20
hours and you define the “Delay
End” time to 6 hours. This means
your wash program will finish in 6
hours. (See diagram below)
After selecting Delay End time, press
Start/Pause touchpad to start the
program. Machine will then
countdown and update time on the
display every hour until it reaches
the starting point of the wash cycle.
Press the Delay End touchpad to
choose the end time as your wish.
The display will show the number of
hours and the indicator above the
touchpad will light up. This option
must be selected after choosing the
wash program, and before pressing
the “Start/Pause” touchpad.
6
Spin speed can also be modified. If
“No Spin” is selected, appliance will
only rinse.
3.20 hrs.2.80 hrs.
Working Cycle
“Delay End” Time : 6 hrs.
Pressed
Start/Pause
End of
Cycle
Start the
Program
Countdown
NOTE:

Display
Rinse Plus Option ( )
9
This option is recommended for
people who are allergic to
detergents, and in areas where the
water is very soft.
To deactivate press and hold
these 2 touchpads at the same
time
until the LED “ ” goes off.
Start/Pause Touchpad ( )
To start the selected program,
press the “Start/Pause”.
To interrupt a program which is
running, press the “Start/Pause” to
pause the machine, t
he Start/Pause
pilot light flashes.
To restart the program from the
point at which it was interrupted,
press the “Start/Pause” again,
the
Start/Pause pilot light will stop
flashing
.
The display shows the following
information:
Child Lock Option ( )
Your appliance is provided with
CHILD SAFETY LOCK which
permits you to leave the appliance
unsupervised with the door closed
without having to worry that
children might be injured by or
cause damage to the appliance.
Set this option after pressing the
Start/Pause touchpad.
This function remains
enabled even after the
appliance is switched off.
Press and hold “ ” and “ ”
touchpads at the same time
until the LED “ ”
lights up .
The touchpads are locked
(except for the On/Off
“ ” button).
To set “Child Lock” option:
When the program is
completed the display
will show “ ”.
Incorrect Option Selection
If an option which is
not compatible with
the set wash
program selected, the display will
show “ ” and flash with 3
consecutive short beeps.
End Of Program
In the event of
operating problems,
some alarm codes
can be displayed, for example .
(See “Troubleshooting”.)
Alarm Codes
Estimated time of the selected
program
After selecting a
program, the
estimated time is
The estimated time is calculated
automatically on the basis of the
maximum recommended load for
each type of fabric. After the
program has started, the time
remaining is updated every minute.
displayed in hours and minutes (for
example 3.01).
If you wish to modify or cancel Delay
End option after starting the
program, follow the steps below:
set the washing machine to
PAUSE by pressing “Start/Pause”
touchpad;
-
deselect this option by pressing
Delay End once;
-
press the “Start/Pause” to start
the program.
-
7
8
9
10

To deactivate press and hold
these 2 touchpads at the same
time
until the LED “ ” goes off.
Press and hold “ ” and “ ”
touchpads at the same time until
the LED “ ”
lights up .
10
3.3 Programs + Options
Select this option to add rinsing
phases to a program.
This function increases the
program duration.
NOTE:
Program;
Temp.
Whites;White cotton with
heavy level of soil.
Cold to
90 °C
Cold to
60 °C
30 °C
8 kg 1200 rpm
4 kg 1200 rpm
Program
Description
(type of load
and soil level)
Maximum
Dry Clothes
Capacity
(Model: Max.
kg)
Maximum
Spin
Speed
(Model: Max.
rpm)
Options
Time Save Heavy Duty Easy Iron Rinse & Spin Drain & Spin Delay End Rinse +
Colours;Synthetic or mixed
fabric items with
normal level of soil.
Fast
Wash;
Synthetic and
mixed fabric items.
Light soil and items
to freshen up.
Enabling/Disabling Buzzer
Sounds
If you want to disable the
buzzer sound (except for event
of appliance malfunction)
, press
and hold “Programs ( )” and
“Temp ( )” touchpads at the
same time for 3 seconds, and
listen for “BEEP, BEEP”.
To set “Rinse Plus” option:
No Spin Rinse Hold
3.2
This function remains enabled
even after the appliance is
switched off.
3 kg 800 rpm
The program is completed.
The appliance has a malfunction.
The buzzer sounds operate when:
To enable the Buzzer press
and
hold
these 2 touchpads at the
same time for 3 seconds, and
listen for “BEEP”.
-
-
-
-

Cold to
40 °C
Cold to
40 °C
Cold to
40 °C
Delicates;Delicate fabrics as
acrylics, viscose,
polyester items
with normal soil.
Bedding;
Special program
for one synthetic
blanket, duvet,
bedspread and
so on.
Woollens;
Specially tested
program for
woollen garments
bearing the ‘Pure
new woollen,
non-shrink,
machine washable’
label.
4 kg 1200 rpm
2.5 kg 1000 rpm
4 kg 800 rpm
11
1) ECO program with 60 °C option selected is recommended for a full load of normally soiled cottons, and is
the water and energy rating label program.
2) Default option for “Tub Clean” program, cannot disable this option.
Program;
Temp.
ECO;
40 °C,
60 °C 1)
White and
colourfast, cotton
with normal soil.
Set this program
to have a good
washing results
and decrease the
energy consump-
tion. The time of
the washing
program is
extended;
8 kg 1200 rpm
Program
Description
(type of load
and soil level)
Options
Time Save Heavy Duty Easy Iron Rinse & Spin Drain & Spin Delay End Rinse +
Tub
Clean
For cleaning the
wash bowl.
No Spin Rinse Hold
3.3 Programs + Options (continue)
Maximum
Dry Clothes
Capacity
(Model: Max.
kg)
Maximum
Spin
Speed
(Model: Max.
rpm)
2)

12
BEFORE FIRST USE4.
DAILY USE5.
Ensure that the electrical and water
connections comply with the
installation instructions.
Put 2 litres of water in the detergent
compartment for washing phase.
This activates the drain system.
1.
2.
3. Select “Whites” cycle at 90 °C, without
any laundry in the machine, to remove
any manufacturing residue from the
drum and tub then start the machine.
Step 1 - Loading The Laundry
5.1 Four Steps Start Up Guide
Connect the mains plug to the mains
socket.
Turn the water tap on.
1.
Open the door by carefully
pulling the door handle outwards.
Check and remove objects (if
there are any) that could be
trapped in the fold.
2.
Wash bras, pantyhose and
other delicates in a mesh
laundry bag, which you can
purchase from your
supermarket.
Remove hooks or tie them up
in a bag or net.
Make sure that you wash lint
collectors separately from lint
producers.
IMPORTANT!
Button up pillowcases, close zip
fasteners, hooks and poppers.
Tie any belts or long tapes.
Make sure that no metal
objects are left in the
laundry (e.g. hair clips,
safety pins, pins).

Step 2 - Using Detergent And Additives
13
Place the laundry in the drum, one
item at a time, shaking them out as
much as possible.
3.
Detergent Dispenser Drawer
1.
The detergent dispenser is divided
into two compartments.
Compartment “SOFTENER”
This compartment is used for fabric
conditioner and starching agent.
-
Compartment “DETERGENT”
This compartment is used for
detergent on all programs.
-
Powder or liquid detergent
( )
Position down: for liquid
detergent.
Close the door and make sure that
no laundry remains between the seal
and the door. There is a risk of water
leakage or damage to the machine
and your laundry.
4.
Remove the drawer by pushing the
side tab and pulling it out (as shown
below).

Measure out the amount of
detergent required, pour it into
the main wash compartment
( ).
14
Position up: for powder deter-
gent (factory setting).
Do not use gelatinous or thick
liquid detergents.
-
Do not put more liquid than the
maximum level.
-
Do not set the DELAY END.
-
When you use the liquid
detergent:
Pull out the dispenser drawer
until it stops.
-
-
If required, pour fabric softener
into the compartment marked
(the amount used must not
exceed the “MAX” mark in the
drawer).
-
Close the drawer gently.
-
Measure out the detergent and the
fabric softener;
2.

Pess the Spin “ ” and the
temperature “ ” touchpads
repeatedly to change the spin
speed and temperature.
15
Step 3 - Setting A Program For Washing
1.
Press the On/Off button to turn on
the washing machine.
The indicator of the “Start/Pause”
touchpad flashes.
3.
If you want your
laundry to be spun or
use temperature
different from the one
proposed by the
washing machine.
4.
Press this touchpad, if
you want your laundry to
be washed with special
functions.
Different functions can be
combined which is dependent
on the program selected.
2.
Press the Program
touchpad, to choose the
wash program you require.
(For more information
about washing programs,
please see page 10)
-
The display shows the program
duration.
-
5.
The relevant light will light
up.
The relevant light will light up.
Step 4 - Starting a program
To start a program,
press the Start/Pause
( ) touchpad,
the corresponding pilot light will stop
flashing and a default program
duration will be displayed on the
screen.
If you want to reduce washing
time, select the “Time Save”*
option to reduce washing time.
NOTE: This option is suitable
for lightly soiled or items that
need refreshing.
If you want
to define the end of the
washing program
, press the “Delay
End ( )” touchpad repeatedly to
choose your washing machine
working time.
After approximately 15 minutes into
the wash cycle the dot on the
screen will start to flash.
This is to indicate that the machine
is adjusting the program duration
based on the type and size of the
load. When this phase is finished
the dot will stop flashing and
remains lit for the rest of the cycle.
The display will now show the new
adjusted program duration.
NOTE

16
To pause press Start/Pause.
The indicator will start flashing.
Press the Start/Pause again.
The program will continue.
Changing a running program is
possible only by switching off the
appliance.
Press the “On/Off” button to
cancel the program and to turn
off the appliance.
5.2 Interruption Of A Program
5.3 Changing A Program
Once the wash program has
started, only some of the options
can be changed. Machine will
display “ ” if selected option
is not available.
Press Start/Pause to pause. The
indicator will start flashing.
1.
Change the options.2.
Press Start/Pause again. The
program will continue.
3.
While a program or the Delay End
is operating, the appliance door is
locked and the door lock indicator
“ ” is on.
First set the machine to PAUSE by
pressing the “Start/Pause”
touchpad. Wait until the door lock
indicator “ ” goes off, then the
door can be opened.
If the door lock indicator “ ”
does not disappear, this means
that the machine is already
heating and the water level is
above the bottom edge of the
door or the drum is turning. In
this case the door CAN NOT be
opened. If you need to open it, you
must drain the water to open the
door.
To drain the water, you have to
switch the machine off by pressing
the “On/Off” button to deactivate
the appliance. Turn On the
machine and select “Drain & Spin”
option, then press Start/Pause
touchpad to start the program.
When the program is completed
and the door lock indicator “ ”
goes off, you can open the door.
Press the “On/Off” button again
to start the appliance. Now, you
can set a new washing
program.
The appliance will not drain the
water.
5.4 Changing The Options
5.5 Opening The Door
You can select “No Spin”, if
you want the machine to
only drain the water.
When The Washing Program
Is Completed, But There Is
Water In The Drum
(Option “Rinse Hold” is used)
The drum turns regularly to
prevent the creases in the
laundry.
You must drain the water to open
the door.
The door lock indicator “ ” is
on. The door stays locked.
5.6
The indicator “Start/Pause”
flashes to remind you to drain
the water.
1.
To drain the water:
Press the “Start/Pause ”
touchpad. The appliance drains
the water and spins with the
maximum spin speed for
selected program.

17
The appliance stops automati-
cally.
The acoustic signal will operate.
The display will show “ ”.
The indicator of the “Start/Pause”
touchpad goes off.
The door lock indicator “ ”
goes off.
Remove the laundry from the
appliance. Make sure that the
drum is empty.
Keep the door and the detergent
drawer ajar, to prevent the
mildew and odours.
Turn off the water tap.
5.7 At The End Of The Program
AUTO Stand-By Option
5.8
The AUTO Stand-by option
automatically deactivates the
appliance to decrease the energy
consumption when:
You do not press any touch-
pads for 5 minutes before you
press “Start/Pause”.
Press the “On/Off” button
to activate the appliance
again.
After 5 minutes from the end of
the washing program.
Press the “On/Off” button
to activate the appliance
again.
When the program is completed
and the door lock indicator “ ”
goes off, you can open the door.
Alternatively, before pressing
the “Start/Pause” touchpad, you
can press the “Spin ” touchpad
to change the spin speed. You
can select “No Spin”, if you want
the machine to only drain the
water.
2.
Press the “On/Off” button to
deactivate the appliance.
3.
After approximately 18 hours if
you do not press Start/Pause
touchpad, the appliance will
drain and spin automatically
(except for Wool/Handwash
program) .
At the end of the program the
time remaining can suddenly
decrease from 7 minutes or less
to 0 due to the overestimated
total program time during the
load sensing phase. In some
cases (with perfectly balanced
load) the program time can be
shorter than the time estimated
after the load sensing phase is
completed. This is a normal
behavior of the machine and not
a cause for concern as it does
not compromise its performance.

18
WASHING HINTS6.
Follow the wash code symbols on
each garment label and the
manufacturer’s washing
instructions. Sort the laundry as
follows: whites, coloureds,
synthetics, delicates, woollens.
6.1 Sorting The Laundry
6.2 Temperatures
Never wash whites and coloureds
together. Whites may lose their
“whiteness” in the wash.
New coloured items may run in the
first wash; they should therefore be
washed separately the first time.
Button up pillowcases, close zip
fasteners, hooks and poppers. Tie
any belts or long tapes.
Remove persistent stains before
washing.
Rub particularly soiled areas with a
special detergent or detergent paste.
Treat curtains with special care.
Remove hooks or tie them up in a
bag or a net.
Make sure that no metal objects
are left in the laundry (e.g. hair
clips, safety pins, pins).
6.3 Before Loading The
Laundry
Recommended loads are indicated
in the program charts. General
rules:
Washing a maximum load makes
the most efficient use of water and
energy. For heavily soiled laundry,
reduce the load size.
Cotton, linen: drum full but not
too tightly packed;
Synthetics,
Delicate:
drum no more
than half full;
Woollens: drum no more
than one third full.
6.4 Maximum Loads
Blood: treat fresh stains with cold
water. For dried stains, soak
overnight in water with a special
detergent then rub in the soap and
water.
Oil based paint: moisten with
benzine stain remover, lay the
garment on a soft cloth and dab
the stain; treat several times.
Dried grease stains: moisten with
turpentine, lay the garment on a
soft surface and dab the stain with
the fingertips and a cotton cloth.
Stubborn stains may not be
removed by just water and
detergent. It is therefore advisable
to treat them prior to washing.
6.5 Removing Stains
90°C
60°C
50°C
40°C
30°C
Cold
For normally soiled,
colourfast garments (e.g.
shirts, night dresses,
pyjamas....) in linen, cotton
or synthetic fibres and for
lightly soiled white cotton
(e.g.underwear).
For delicate items (e.g. net
curtains), mixed laundry
including synthetic fibres
and woollens bearing the
label pure new wool,
machine washable,
non-shrink.
For heavily or normally
soiled white cottons and
linen (e.g. teacloths, towels,
tablecloths, sheets...).

19
Rust: oxalic acid dissolved in hot
water or a rust removing product
used in cold water. Be careful with
rust stains which are not recent
since the cellulose structure will
already have been damaged and
the fabric tends to hole.
Mould stains: treat with bleach,
rinse well (whites and fast
coloureds only).
Grass: soap lightly and treat with
bleach (whites and fast coloureds
only).
Ball point pen and glue: moisten
with acetone (*), lay the garment on
a soft cloth and dab the stain.
Lipstick: moisten with acetone (*)
as above, then treat stains with
methylated spirits. Remove any
residual marks from white fabrics
with bleach.
The detergent and any additives
must be placed in the appropriate
compartments of the dispenser
drawer before starting the wash
program.
Red wine: soak in water and
detergent, rinse and treat with
acetic or citric acid, then rinse.
Treat any residual marks with
bleach.
Ink: depending on the type of ink,
moisten the fabric first with
acetone (*), then with acetic acid;
treat any residual marks on white
fabrics with bleach and then rinse
thoroughly.
Tar stains: first treat with stain
remover, methylated spirits or
benzine, then rub with detergent
paste.
Good washing results also depend
on the choice of detergent and use
of the correct quantities to avoid
waste and protect the
environment.
Although biodegradable, detergents
contain substances which, in large
quantities, can upset the delicate
balance of nature.
The choice of detergent will depend
on the type of fabric (delicates,
woollens, cottons, etc.), the colour,
washing temperature and degree of
soiling.
Only low suds Front load washer
detergents should be used in
this appliance:
(*) do not use acetone on artificial
silk.
6.6 Detergents and Additives
powder detergents for all types
of fabric,
powder detergents for delicate
fabrics (60 °C max) and woollens,
liquid detergents, preferably for
low temperature wash program
(60 °C max) for all types of fabric,
or special for woollens only.
Pour liquid detergent into the
dispenser drawer compartment
marked “ ” just before starting
the program.

20
NOTE:
the washload to turn grey,
greasy clothes.
sudsing,
inadequate rinsing.
reduced washing effect,
Any fabric softener or starching
additives must be poured into the
compartment marked “ ” before
starting the wash program.
Follow the product manufacturer’s
recommendations on quantities to
use and do not exceed the MAX
mark in the detergent dispenser
drawer.
Do not spray stain
pre-treatment products (e.g.
Preen) on or near the machine,
as it can attack plastic
materials reducing its life.
Information on hardness of the
water in your area can be obtained
from the relevant water supply
company, or from your local
authority.
Follow detergent manufacturers
instructions on recommended
dosage of detergent.
Water hardness is classified in
so-called “degrees” of hardness.
6.7 Quantity of Detergent
To Be Used
Not enough washing powder
causes:
Too much washing powder
causes:
you are washing a small load,
large amounts of foam form
during washing.
the laundry is lightly soiled,
Use less detergent if:
Use only front load type
detergents and reduce the
amount of detergent if
oversudsing occurs.