Westinghouse WWT554B User manual

Model: WWT6541, WWT554B
Washing Machine

CONTENTS
CUSTOMER CARE AND SERVICE
SAFETY INFORMATION
2
SAFETY INFORMATION
PRODUCT DESCRIPTION
CONTROL PANEL
WASHING INSTRUCTIONS
DAILY USE
CARING FOR YOUR WASHING MACHINE
HELPFUL HINTS IN DEALING WITH WASHING PROBLEMS
A GUIDE TO STAIN REMOVAL
TROUBLE SHOOTING
................................................................................. 2
.............................................................................. 5
.......................................................................................... 7
.......................................................................... 13
................................................................................................... 15
................................................... 19
....................... 22
..................................................................... 24
.................................................................................. 26
1.
2.
3.
4.
5.
6.
7.
8.
9.
ENVIRONMENT CONCERNS ....................................................................... 2910.
WARRANTY .................................................................................................. 3111.
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
In the interest of your safety and to
ensure the correct use, before
installing and first using the appliance,
read this user manual carefully,
including its hints and warnings.
This appliance is intended to be used
in household and similar applications
such as:
Farm houses
By clients in serviced apartments,
holiday apartments and residential
type environments.
CONDITIONS OF USE
To avoid unnecessary mistakes and
accidents, it is important to ensure
that all people using the appliance are
thoroughly familiar with its operation
and safety features.
Save these instructions and make
sure that they remain with the
appliance if it is moved or sold, so
that everyone using it through its life
will be properly informed on
appliance use and safety.
Warning / Caution-Safety information.
General information and tips.
Environmental information.
Subject to change without notice.
1.
-
-

3
1.1 GENERAL SAFETY
It is dangerous to alter the specifica-
tions or attempt to modify this
product in anyway.
Make sure that small pets do not
climb into the washbowl. To avoid
this, please check into the wash-
bowl before using the appliance.
Only use the advised quantities of
fabric softener and detergent.
Damage to the fabric can ensue if
you overfill. Refer to the
manufacturer’s recommendations of
quantities.
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
Wash small items such as socks,
laces, washable belts etc in a
washing bag or pillow case as it is
possible for such items to slip down
between the tub and the agitator.
Do not use your washing machine
to wash articles with whale bones,
material without hems or torn
material.
Always unplug the appliance and
turn off the water supply after use,
clean and maintenance.
Under no circumstances should you
attempt to repair the machine
yourself. Repairs carried out by
inexperienced persons may cause
injury or serious malfunctioning.
Contact your local Service Centre.
Always insist on genuine spare parts.
When unpacking the appliance,
check that it is not damaged. If in
doubt, do not use it and contact
the Service Centre.
After having installed the appliance,
check that it is not standing on the
inlet and drain hose.
Appliance should not be installed in
a humid place.
If the machine is situated on a
carpeted floor, please adjust the
feet in order to allow air to circulate
freely.
Always be sure, that there is no
water leakage from hoses and their
connections after the installation.
1.2 INSTALLATION
Any objects such as coins, safety
pins, nails, screws, stones or any
other hard, sharp material can cause
extensive damage and must not be
placed into the machine.
If the supply cord is damaged,
should the appliance power supply
cable need to be replaced, this shall
be carried out by our Service Centre.

4
Any plumbing work required to
install this appliance should be
carried out by a qualified plumber.
Any electrical work required to
install this appliance should be
carried out by a qualified electrician.
This appliance is designed for
domestic use. It must not be used
for purposes other than those for
which it was designed.
Only wash fabrics which are
designed to be machine washed.
Follow the instructions on each
garment label.
Do not overload the appliance. See
the relevant section in the user
manual.
Before washing, ensure that all
pockets are empty and buttons and
zips are fastened. Avoid washing
frayed or torn articles and treat
stains such as paint, ink, rust, and
grass before washing.
Garments which have been in
contact with volatile petroleum
products should not be machine
washed. If volatile cleaning fluids are
used, care should be taken to
ensure that the fluid is removed from
the garment before placing in the
machine.
Never pull the power supply cable
to remove the plug from the socket,
always take hold of the plug itself.
Never use the washing machine if
the power supply cable, the control
panel, the working surface or the
base are damaged so that the
inside of the washing machine is
accessible.
This washing machine is not
intended for use by young children
or infirm persons without supervi-
sion.
Young children should be super-
vised to ensure that they do not
play with the appliance.
The packaging components (e.g.
plastic film, polystyrene) can be
dangerous to children - danger of
suffocation! Keep them out of
children’s reach.
Keep all detergents in a safe place
out of children’s reach.
Make sure that children or pets do
not climb into the washbowl.
1.3 USE
1.4 CHILD SAFETY
If this appliance is supplied from a
cord extension set or electrical
portable outlet device, the cord
extension set or electrical portable
device must be positioned so that it
is not subject to splashing or
ingress of moisture.
Water pressures between minimum
50kPa and maximum 800kPa are
acceptable.
Connect the machine to an
earthed socket outlet.

5
PRODUCT DESCRIPTION2.
FRONT VIEW BACK VIEW
1
7
8
2
3
4
6
5
WASHING MACHINE PARTS
2.1
1
2
Control Panel
PARTS LISTINSIDE VIEW
3
4
Lid
5
Cabinet
Levelling Adjustable Front Feet
7
6
8
Water Inlet Hose
- RED fittings (Hot Water)
- BLUE fittings (Cold Water)
Mains Cable
9
Outlet Hose/Drain Hose (See
installation instructions sheet to
fit & position drain hose)
Back Feet (fixed)
10
Bleach Dispenser
Wash Bowl
11
12
Fabric Softener Dispenser
Agitator
13
Lint Filter
14
Frame Filter
11
12
10
9
11
14
13
12

6
Always press buttons gently. Watch the
lights on the control panel to see the
effect pressing a button or turning a
program selector knob has, and listen
for “BEEPS”.
When you press a button you will get a
short “BEEP” to acknowledge the entry. If
the option is not available at the time, the
machine will not allow you to select it, and
you will here the three short “BEEP” to
remind you the option is not available and
the display will show “ ” and flashing.
Power Failure Recovery
Button Response and Lights
When there is power failure while
machine is washing or rinsing or
spinning. The machine tries to save the
settings at which stage the machine is
doing and then when the power returns
back the machine will starts washing
from the stage where it is left off.
The washing machine can stop during the
spin stage of a wash or spin because of
an out of balance condition. Out of
balance during spin is caused by an
uneven distribution of clothes in the wash
bowl. If the washing machine detects this
problem, it will try to clear itself by
following the steps below:
The agitator & bowl rotates while it is filled
with water to immerse the clothes.
The agitator then rotate to move the
clothes so that the detergent can be
dissolved and activated at the selected
water temperature.
After the wash operation is completed,
the bowl is filled with more water. The
agitator then moves in an energy efficient
mode, generating additional mechanical
actions. If “Eco” rinse option selected, this
function will not operate.
This function will not operate in “Tub
Cleaning” and Drain + Spin” programs.
Stop spinning then starts filling to the
selected water level.
To rectify the out of balance condition,
open the lid and wait until the machine
stops spinning, then redistribute the
clothes evenly in the space between the
agitator and wall of the wash bowl. Close
the lid and press the “Start/Pause” button
to continue the spin stage
Auto Clear Unbalance
1) Wash operation
2) Agitation and dilution
The Westinghouse wash system
NOTE
NOTE
PRODUCT FEATURES
2.2
If the machine detects the problem
again, it will repeat self clearing steps
one more time. If problem reoccurs the
third time, “ ” will be displayed along
with 3 short beeps repeated 3 time
every 15 seconds to get your attention.
1.
Drains the water.3.
Starts the spin cycle again.4.
Agitates for 3 minutes to redistribute
the clothes.
2.
-
-
If you have frequent out of balance
interruptions, it may be due to your
washing machine not standing firm and
level on the floor. This can be corrected
by adjusting the washing machine legs
as described in the Installation Instruc-
tions sheet supplied with your machine.
-
-
If “Extra” rinse option is selected, self
clearing steps will be repeated up to 6
times.
-

CONTROL PANEL3.
7
3.1
3.1
3.2
3.3
3.4
3.2 3.3 3.4 3.5 3.7
3.83.6
Program Selector Knob
Water Temperatures Button
Water Level Button
Soak Time Button
3.5
3.6
3.7
3.8
Rinse Option Button
Display
Start/Pause Button
Delay End Option Button
(Only model WWT6541)
After the machine has started, the entire
wash option button will be disabled and
the display will show “ ” and flashing
with three short beeps to indicate the
button is disabled (except Start/Pause
button).
All functions of the washing
machine will stop when the lid is
open.
This mode permits you to either enable
or disable the beeping (3 beeps every
20 seconds) at the end of the wash. As
an example, you might wish to disable
this beeping when you start a wash
when going to bed, so that when the
wash finished, it will not disturb you
through the night.
Enabling/Disabling End-of-Wash
Beeping Mode
All error beeping is not disabled by
this feature, such as a critical fault, or
lid open during fill/agitate/spin, or out
of balance during spinning.
Responding sound while pressing the
button is not disabled by this feature.
To change the “beeping” selection,
proceed as follows:
If you want to DISABLE the “beeping”
sound, when the washing machine in
Stand-By-Mode (after 7 seconds
passed from machine switching on),
press “Soak Time” and “Water Level”
buttons at the same time until you
hear 2 shorts “BEEP” sound.
To return to default configuration press
these 2 buttons at the same time until
you hear “BEEP” sound.
NOTE:
Delay End Option Button
only for model WWT6541

8
Turn the Program Selector knob to
choose the wash program you
want. The table “Your Program
Guide” shown on page 12 will help
you in selecting the right program.
The Program Selector knob is not a
timer. Once you select a wash
program, the Program Selector
knob will stay at that position for
the whole wash cycle.
3.1
PROGRAM SELECTOR
KNOB
For each wash program your
washing machine automatically
selects a suitable fill water
temperature. If you want to use a
different wash water temperature,
press the Temperature button
repeatedly.
The temperature of warm water will
depend on the temperature and
pressure of your hot and cold water
supplies. The recommended
temperature for warm is 35°C.
NOTE:
You have four temperatures to
choose from Very Hot, Hot, Warm
and Cold.
The water temp lights will tell you
the temperature for each press of
the button.
3.2
WATER TEMPERATURES
BUTTON
Always check your label for the
washing temperature symbols
which the International Care
Labelling Code now uses
You can adjust the flow rate of the
water supplies to adjust the Warm
temperature. All rinse water
temperatures are cold.
Cold, Warm, Hot.
When you choose the Woollens
and Bedding program, the Deep
Rinse option is automatically
selected for you. You will NOT be
able to select and use Eco Rinse
with these two programs.
NOTE:
If you have a cold water connection
ONLY and the hot inlet valve is
capped off (refer installation
instructions) you must select Cold
washes only. To fill detergent, you
must follow steps as below:
1. Measure the correct amount of
powder detergent by following
the recommendations on the
package.
2. Mix powder detergent in one
litre of hot or warm water.
3. Add the pre-mixed detergent to
the wash load.
move around
agitator

9
Flood diagnostic is explained on page 28. You should refer to this if you
have water pouring onto the floorThe display will show “ ” and you will
hear rapid short beep continuously to remind you about this problem.
Choose the water level by pressing Water Level button. Use only the amount of
water you need for the wash load.
3.3
WATER LEVEL BUTTON
This option allows you to soak
heavily soiled clothes at the
beginning of the wash. To do this,
press Soak Time button to select
the soak time.
3.4
SOAK TIME BUTTON
The lid must be closed to allow Soak
functions to operate, including the
“Heavy Duty” wash program 6 mins
soak. The machine will agitate for short
periods. At other times, the clothes are
soaking and the machine will be doing
nothing.
IMPORTANT: Components in the washing machine are designed to be used
with water no hotter than 70°C. If your water supply is too hot, you should
have a temperature limiting valve fitted by a qualified plumber.
Very Hot
Temp.
Proportion of Hot and Cold water based on temperature selection.
Descriptions Water from
HOT valve
Water from
COLD valve
Hot
Warm
Cold
for normally soiled, colourfast garments (e.g.
shirts, night dresses, pyjamas....) in linen,
cotton or synthetic fibres and for lightly
soiled white cotton (e.g.underwear).
for delicate items (e.g. net curtains), mixed
laundry including synthetic fibres and
woollens bearing the label pure new wool,
machine washable, non-shrink.
for normally soiled white cottons and linen
(e.g. teacloths, towels, tablecloths, sheets...). 90 % 10 %
60 % 40 %
50 % 50 %
10 % 90 %
1) Model WWT554B Maximum mass of dry cloth is 5.5kg
2) Model WWT6541 Maximum mass of dry cloth is 6.5kg
Water
Level Water level description
Clothes Load (kg)
4 to 5.5 5 to 6.5
Full The machine will fill the Full amount of water for
your FULL load.
Medium The machine will fill the medium amount of water
for your HALF load.
High The machine will fill the High amount of water for
your NEARLY FULL load.
Low The machine will fill the Low amount of water for
your SMALL load. 0 to 1.5 0 to 1.5
1.5 to 3 1.5 to 3
3 to 4 3 to 5
Model
WWT554B
Model
WWT6541

10
NOTE:
Pressing the Rinse Option button to
choose the rinse type for your wash
load. For most washes the machine
automatically selects “Deep” rinse
for you.
3.5
RINSE OPTION BUTTON
When Eco rinse is used, rinse water
is sprayed into the washbowl in
pulses. After each pulse the
washbowl will spin to remove
detergent laden water from the
clothes.
How does Eco Rinse work ?
There are four rinses to choose
from Extra, Deep, Eco and Hold.
Extra rinse, the machine fills
twice, giving you two deep
rinses.
Deep rinse, the machine fills
once, giving you one deep rinse.
Eco rinse, is a spray rinse giving
you maximum water saving.
Hold, by selecting this option the
water of the last rinse is not
emptied out and the drum turns
regularly to prevent the laundry
creases.
After cycle has finished, You
must drain the water from
the washing tub by pressing
“Start/Pause” button to
continue the cycle.
The machine will go through a series
of maximum six pulses spray and
short spin cycles in this manner,
depending on program selection,
followed by a final long spin that
removes the water from the clothes
to complete the full wash program.
Compare this with Deep rinse
where much more water is used.
Deep rinse, water enters the
machine filling up to the wash
water level selected. The washer
agitates and finally empties the
rinse water through the drain
hose.
Extra rinse, this is special option
for those people who suffer from
allergies, this extra rinse will
provide two deep rinses to ensure
all detergent residue has been
removed.
Eco Rinse CANNOT be selected
with Woollens and Bedding
program.
Select Deep rinse if you are going
to use fabric softener.
Extra and Eco rinse is not
designed to be used with fabric
softener.
Deep rinse ensures the fabric
softener is correctly dispensed
and thoroughly removed from
your clothes during rinsing.

11
3.7
START/PAUSE BUTTON
When the program is completed
the 3 zeros will flash.
Incorrect Option Selection
If an option which is not compatible
with the set wash program is
selected, the display will show
“ ” and flashing with 3
consecutive short beeps
End Of Program
In the event of operating problems,
some alarm codes can be
displayed, for example (see
“Troubleshooting” and
“Troubleshooting fault displays” on
page 26, 27, 28).
Alarm Codes
3.8
DELAY END OPTION
BUTTON
(Only Model WWT6541)
Before you start the program, this
option makes it possible to delay the
end of the washing program by 2, 4,
6, 8, 10 or 12 hours, by pressing
Delay End button to choose the end
time as your wish. This option must
be selected after choosing the wash
program, and before pressing the
“Start/Pause” button. If after having
set the Delay-End option (and
pressed “Start/Pause” button) and
you wish the cancel or modify it,
follow the below steps:
set the washing machine to
PAUSE by press “Start/Pause”
button;
-
deselect the Delay-End option,
changing the status;
-
press the “Start/Pause” to start
the program.
-
3.6
DISPLAY
The display shows the following
information:
Machine In Pause Mode
You can tell when your washing
machine is in pause mode. The
time remaining and “ ” will be
flashing.
Estimated time of the
selected program
After selecting a program, the
estimate time is displayed in hours
and minutes (for example 1.04).
The estimate time is calculated
automatically on the basis of the
maximum recommended load for
each type of fabric. After the
program has started, the time
remaining is updated every minute.
If the lid has been opened any
time during operation of the
machine, the Start/Pause
button has to be pressed when
the lid is closed to continue
operation.
To start the selected program,
press the “Start/Pause” button.
If you have started your wash and
you wish to stop it for some reason,
press the “Start/Pause” button to
enter PAUSE mode. To restart the
program from the point at which it
was interrupted, press the
“Start/Pause” again.

12
YOUR PROGRAM GUIDE
Program Description
Options
Off To reset a program and to
switch off the machine.
Regular
Wash
For normally soiled cotton
load at rated load capacity.
Fast Wash For a very small load of
mixed fabrics.
Colours For colours item of mixed
fabrics.
Heavy Duty For a heavily soiled cotton
wash load.
Woollens For woollen fabrics labelled
“Machine Washable”.
Bedding For bedding fabrics labelled
“Machine Washable”.
Delicates For lingerie, lace, trimmed
and embroidered items.
Rinse+Spin
For items that you want to
rinse and spin eg. clothes
items you have hand
washed in a wash tub.
Drain+Spin For very wet clothes to
remove the water.
Tub Cleaning For cleaning the wash bowl.
Cold Wash
For synthetic or mixed
fabrics, underwear, coloured
garments, non-shirnk shirts,
blouses.
**
***
**
“Drain+Spin” has a built-in pump out period of approx. 2 minutes prior to spin.
“Heavy Duty” has a built-in Soak period of 6 minutes.
*“Regular Wash, Warm Temp, Full Water Level, No Soak, Eco Rinse” is recommended for a full load of normally
soiled cottons.
*
***
Temperature
Very Hot Low No Soak Hold
                
                
                
               
                
                
                
               
            
                
                
              
Deep Eco Extra 15 30 45 Medium High Full
Cold Warm Hot
Water Level Soak Time Rinse Option
Remarks
Delay End
(Only Model
WWT6541)

13
SORT YOUR WASHING
INTO SEPARATE WASH
LOADS
Each load of washing should
contain clothing which needs the
same washing conditions. For
example, you should not wash
delicate clothes with very dirty
work clothes.
Colour fast and non-colourfast
fabrics should be separated.
Knowing the type of fabrics you
have and how dirty they are will
help when you make selections
from the wash program options.
Some fabrics are lint collectors
and can pick up lint, dirt and
colour from other fabrics which
are lint producers. Some
examples are listed below:
Lint collectors Lint producers
- Corduroy
- Synthetics
- Permanent
press fabrics
- Towels
- Nappies
- Chenille/
Candlewick
Make sure that you wash lint
collectors separately from lint
producers.
WASHING INSTRUCTIONS4.
4.1
NOTE:
IMPORTANT!
However, due to the variables of fabric
types, soil levels, detergent types and
available program settings you may find
some combinations of these which do
not always result in the perfect wash.
If for example you see residuals of
detergent or soils on some items,
please read the section Residues on
washed items paragraph.
Over time you will learn what is the best
set-up of programs, detergent and load
sorting for different load types and soils.
These Washing Instructions are of a
general nature and you should get good
wash results by following them.
Rub particularly soiled areas with
a special detergent or detergent
paste.
Treat curtains with special care.
Never wash whites and coloureds
together. Whites may lose their
“whiteness” in the wash.
New coloured items may run in
the first wash; they should
therefore be washed separately
the first time.
Button up pillowcases, close zip
fasteners, hooks and poppers.
Tie any belts or long tapes.
Remove persistent stains before
washing.
Make sure that no metal objects
are left in the laundry (e.g. hair
clips, safety pins, pins).

14
If you use pre-treatment sprays or
stain removers, apply them to the
clothing well away from your
washing machine.
PRE-TREATMENT SPRAYS
AND STAIN REMOVERS
Pre-treatment sprays and stain
remover can damage plastic
components on your washing
machine.
4.2
DETERGENT
4.3
Wash bras, pantyhose and other
delicates in a mesh laundry bag,
which you can purchase from
your supermarket.
WARNING!
Don’t use the wrong type of detergent.
You must use a low sudsing detergent
designed for front load washing
machines or high efficiency top
loaders, such as Cold Power for Front
Loaders and High Efficiency Top
Loaders or detergents labelled “Matic”.
Don’t use soap-based products in
your washing machine.
Don’t use too much detergent. This
can result in excessive suds that can
cause low spin speeds, poor rinsing
and overloading the motor during spin
stages of the wash program.
Don’t use too little detergent because
you will get a poor wash. If you think
you need more, increase dosages by
only small amounts to avoid excessive
suds.
Quantity of detergent to be used
Good washing results also depend
on the choice of detergent and use
of the correct quantities to avoid
waste and protect the environment.
Although biodegradable, deter-
gents contain substances which, in
large quantities, can upset the
delicate balance of nature.
The choice of detergent will
depend on the type of fabric
(delicates, woollens, cottons, etc.),
the colour, washing temperature
and degree of soiling.
The type and quantity of detergent will
depend on the type of fabric, load size,
degree of soiling and hardness of the
water used.
Information on hardness of the water in
your area can be obtained from the
relevant water supply company, or from
your local authority.
Follow the product manufacturers’
instructions on quantities to use.
Not enough washing powder causes:
the washload to turn grey, greasy
clothes.
Too much washing powder causes:
sudsing, reduced washing effect,
inadequate rinsing.
Use less detergent if: you are washing
a small load, the laundry is lightly
soiled, large amounts of foam form
during washing.
Water hardness is classified in so-called
“degrees” of hardness.
Remove hooks or tie them up in
a bag or net.

15
LOAD THE WASHING
MACHINE
5.2
STARTING YOUR WASHING
MACHINE
5.1
When loading the clothes into your
washing machine, there are four
things to remember:
Clothes must be loaded evenly
around the agitator. For best
results load small items first,
followed by large items.
1.
1.
Clothes must not be wrapped
around the agitator.
2.
The washing machine must not
be overloaded. Clothes must be
able to move during wash.
3.
The load should contain only
three or four large items, for
example sheets. The rest of the
load should be small items. A
mixed load of large and small
items will wash cleaner than a
load of all large items.
4.
DAILY USE5.
Connect the mains plug to the
mains socket.
2.
Turn the water tap on.
ADD THE DETERGENT
5.3
1. Measure the correct amount of
powder or liquid detergent by
following the recommendations
on the package.
2. Mix detergent in one litre of hot
or warm water.
3. Add the pre-mixed detergent to
the wash load.
move around
agitator
Don’t do these things:
Using too little detergent will
give you a poor wash result.
Use soap based products in
your washing machine.
Using excessive detergent will
create too much suds and may
cause overloading of the motor
during the spin stage of the
wash cycle. To avoid excessive
suds, reduce the amount of
detergent you use. It is best to
use detergent labelled low
sudsing. Good quality, front
load detergent will perform well
in this machine.

16
ADD FABRIC SOFTENER
5.4
Mix softener with an equal
amount of warm water but only
mix enough to fill to the line
marked inside the cup. The
softener cup holds 75ml.
2.
Pour the mixed softener into the
cup in the top of the agitator.
Do not overfill the cup.
3.
Do not spill fabric softener
on the clothes as it may
stain them.
If you are going to use fabric
softener, you must select the
DEEP RINSE option, ie deselect
the ECO RINSEoption.
NOTE: You do not have to use
fabric softener, your washing
machine will wash the clothes
perfectly well without it.
4.
Measure the correct amount of
fabric softener by following the
recommendations on the
package.
1.
ADDING BLEACH
5.5
Press the Start/Pause button to
commence water fill.
2.
Pour the bleach solution down
the hole in the top panel during
fill when there is some water in
the wash bowl.
3.
Turn Program Selector to a
Regular Wash position.
1.
Bleaching of clothes can help to
remove stains, heavy soiling and to
kill bacteria.
This is generally a powder type
bleach. Mix the required quantity
with water and pour down the
bleach hole in the top panel during
the fill when there is some water in
the washbowl.
This type of bleach should not be
mixed with detergent. Mix the
bleach with water as per the
instructions on the container.
How to soak with bleach,
proceed
as follows:
Oxygen Type
Chlorine Type
fill some of water
before pour
bleach solution

17
NOTE:
Allow the machine to agitate for
a few minutes, then let it
stand for the required time
by pressing Start/Pause
button to pause the
machine.
4.
When soaking bleach reached
to the required time, turn
Program Selector to Drain+Spin
position and press the
Start/Pause button to empty
the wash bowl.
5.
SETTING A PROGRAM
5.6
STARTING A PROGRAM
5.7
To start a program, press the
Start/Pause button, a default
program duration will be displayed
on the screen.
1.
Turn the program selector to
the required program.
The relevant light will light up.
-
Your washing machine is
now in STAND-BY-MODE
and ready to wash your
clothes.
-
The buzzer will sound.
-
Once you selected a
program, the program
selected will stay at that
position for the whole of the
cycle.
-
The selector dial can be
turned either clockwise or
anticlockwise.
-
The display shows the
program duration.
-
3.
If you want to define the end of
the washing program
, press
the “Delay End” button
repeatedly to choose your
machine end time.
(Only for model WWT6541)
2.
If you want your laundry to be
washed with functions different
from the one proposed by the
machine, press Temperature,
Water Level, Soak Time and
Rinse Option buttons.
Different functions can be
combined which is dependent
on the program selected.
When these buttons are
pressed, the corresponding
pilot lights come on.
If the settings shown on the
control panel are what you
want to use, press the
Start/Pause button to start
your wash.
When you select the Drain+Spin
program, there will be a delay of
at least 2 minutes before the
washing machine starts to spin.
This delay is a pump out (Drain)
period to ensure the bowl is
empty of water, which is neces-
sary before spin commences.
Even though you may have only
put wet clothes into an empty
bowl, the delay before spin will
still occur to be safe and to
protect your washing machine.
NOTE

18
INTERRUPTION OF A
PROGRAM
5.8
CHANGING A PROGRAM
5.9
Press the Start/Pause again. The
program will continue.
It is possible to change only some
option after the program has
started.
Press the Start/Pause button to
enter PAUSE mode.
1.
Change the options.2.
Press Start/Pause button again.
The program will continue.
3.
The appliance stops automati-
cally.
The display will show “ ”
and flashing with
3 consecutive
long beeps
.
-
-
-
-
-
Remove the laundry from the
appliance. Make sure that the
washing tub is empty.
Keep the lid ajar, to prevent the
mildew and odours.
Turn the Program Selector knob
to the position “Off”.
-Turn off the water tap.
If you have started your wash and
you wish to stop it for some reason,
press the Start/Pause button to
enter PAUSE mode. The time
remaining is shown then “ ”.
You can turn the Program Selector
Knob to a new program position at
any time. If you do move the
Program Selector Knob the effect
will be different depending on the
status of the machine at the time
you do this, as follows:
CHANGING THE OPTIONS
5.10
AT THE END OF THE
PROGRAM
5.11
When the machine is in PAUSE
mode, moving the Knob to a
new position will result in the
machine resetting to the start of
the new program.
When the machine is running,
moving the Knob to a new
position will result in the machine
continuing the wash and the
display will show “ ” and
flashing with 3 consecutive short
beeps to remind you that this
option is not allowed.

19
CARING FOR YOUR WASHING MACHINE6.
Your washing machine will give you long
and trouble-free service, if you follow
the instructions in this section. These
instructions show you how to care for
your washing machine.
Turn the Program Selector
knob to the position “Off”.
1.
Remove the softener dispenser
cup and filter
column from
the centre
of the agitator.
1.
Unclip the filter bag from the
column.
2.
Turn the bag inside out and
remove the lint.
3.
Wash the filter bag and
dispenser cup in hot water.
4.
Reassemble the filter to the
column and place it back in the
centre of the agitator.
5.
Turn off the water taps. This will
extend the life of the inlet hoses.
3.
Leave lid open for a while. This
allows time for moisture inside
the washing machine to
evaporate and for any odours
to disperse.
4.
Lint is a collection of threads and
fluff which comes off your clothes
during washing. Your washing
machine collects this lint in the lint
filter. It is important to clean out this
lint filter preferably after each wash.
Switch off the electricity at the
power point.
2.
WHAT TO DO AFTER YOU
HAVE FINISHED YOUR
WASHING.
6.1
CLEANING THE LINT FILTER
How to clean the lint filter:
6.2
Squeeze tabs
together and
push out.

20
Don’t leave wet clothing
(especially swimwear) in the bowl
for too long before you wash it.
Wipe the surface with a mild
dishwashing detergent and
warm water.
1.
Wipe dry with a soft cloth.
2.
To clean the inside and outside of
your washing machine you should:
CLEANING YOUR WASHING
MACHINE
6.3
metal objects such as bobby
pins, dressmaking pins and nails;
body oils and grease from very
dirty or sweaty clothes being
deposited around the top of the
washbowl;
excessive foam during wash if
incorrect or too much detergent
is used.
salt;
Stains in the wash bowl can be
caused by:
CLEANING STAINS IN THE
WASHBOWL
6.4
Never use solvents, alcohol, aerosol
cleaners, spray pack cleaners, glass
cleaners, metal polishes, caustic
materials, scourers or general
household cleaners on or near the
top panel and lid, control panel or
other parts of your washing
machine.
IMPORTANT:
Check all pockets before loading
clothes into your washing
machine.
IMPORTANT:
Never use bleach cleaners or
steel wool to clean the
stainless steel washbowl.
IMPORTANT:
Wipe with a cleaning product
which is marked suitable for
stainless steel.
1.
Oily deposits can be removed
by wiping surfaces with a mild
dishwashing detergent and
warm water.
2.
How To Clean the Stainless
Steel Wash Bowl :