Westone Bluetooth Cable User manual

Bluetooth®Cable
User Manual
Designed in Colorado, USA

Registration + Maintenance Tips
Here are a few simple guidelines that can greatly increase your
listening enjoyment and the lifespan of your Bluetooth Cable:
• Avoid exposing your cable and monitors to liquids and
temperature extremes.
• Avoid strong impacts to the cable modules.
• To disconnect your cable grasp the plug at the end of the
cable and pull straight out. Never pull on the cable itself as
this could break the unit. Also, avoid bending the cable at
the connection to the monitors.
Congratulations on purchasing your new Bluetooth
cable! Make sure to register your new cable and be the
rst to know about new products, promotions, contests
and accessories.
»Register at: www.westone.com/productregistration
Your warranty covers defects in materials and workmanship for a period of ONE
YEAR from the date of original retail purchase from aWestone authorized dealer.
Proof of purchase is required to verify eligibility.
Vol +
MMCX Audio
™
Connector
L and R designate Left and
Right earpiece
Cable
Management
Battery Power
Charge Port
Vol -
zoomed in
Cable Overview

Connecting your Cable
R
R
R
To connect your Bluetooth cable:
1. Identify which cable is the left and the right by the“L”and
the“R”at the tip of the cable.
2. Match the cable to the appropriate earphone.
3. Insert the cable into the earphone by pushing directly into
the socket.
To disconnect your cable from your monitor:
1. Hold the monitor and the tip of the cable rmly with each
hand pulling at a straight angle from the socket.
2. DO NOT PULL FROM THE WIRE OR AT AN ANGLE.
Pairing your Device
1. Hold down the power button for 5 seconds.The indicator
light located next to the power button will begin ashing
red and blue to indicate the pairing process has begun.
2. To activate Bluetooth® on your phone and set it to search
for new devices, follow the steps below for your phone:
• iPhone: Go to Settings > General > Bluetooth > On*
• Android: Go to Settings > Bluetooth> On > Scan for
devices*
• Windows: Got to Settings>Bluetooth>On*
*Pairing steps can vary by device.
3. Select“Westone BT”
4. If your phone asks for a passcode, enter four zeros (0000)
for the passcode or accept the connection.
5. Once successfully paired, you will hear a single beep and
the indicator light switches from ashing red and blue to
just ashing blue.

Function Button Action
Vol Up Normally Vol + Single Press
Next Track Long Press (1s)
Vol Down Normally Vol - Single Press
PreviousTrack Long Press (1s)
Power On
Power
Long Press (1s)
Power O Very Long Press (2.5s)
Enter Pairing Mode Very Very Long Press (5s)
Music Play/Pause Single Press
Receive Incoming Call Single Press
Reject Incoming Call Long Press (1s)
Cancel/End Active Call Single Press
Reconnect to Last Device Single Press
Voice Search / Siri Double Press
Clear Paired Device List Vol+ & Vol- Very Very Long Press (5s)
Button Functionality
Event LED Indication
Power On Blue + Red LEDs Flash Once
Power O Blue + Red LEDs Flash Once
Pairing Mode Blue + Red LEDs Alternate Flashing
Connectable State Red LED Flash 2 times / 2 seconds
Connected State Blue LED Flash 3 times / 2 seconds
Battery Level Low Red LED Flash 2 times / 1 second
Charging Red LED On
Charging Complete Blue LED On
Clear Paired Device List Blue + Red LEDs FlashTwice
LED Indications

Troubleshooting
1. If you want to pair your device“Westone BT”to a new mobile phone which
has never been connected to your device, you need to ensure that your device
is in pairing mode.
2. There are two ways to enter the pairing mode:
A. Hold down the power button for 5 seconds while turning on the device.
B. Clear the PDL (paired device list) by pressing the combined buttons
(Vol+ & Vol-).
3. The device will enter the pairing mode if no mobile phones have ever been
connected to the device“Westone BT”or the PDL (paired device list) has
been cleared.
4. If your“Westone BT”device fails to pair:
A. Disable and enable Bluetooth® on your phone and search for the device
“Westone BT”again.
B. Reboot your device“Westone BT”and make it go into pairing mode.Then
attempt to pair your device again.
5. The device will switch o if no mobile phone has been connected after 5
minutes.
6. The device will automatically try to reconnect to the last mobile phone which
has been paired with the device“Westone BT.” If you’ve cleared the PDL, the
device will go into pairing mode rather than reconnecting.
7. The operation of enabling“Voice search/Siri”can only be used in smartphones
that support the function of voice search.
8. When the device goes into low battery state, LED indicators for all events will
turn to red and alarm tone will be played once every 5 minutes.

Warranty Information
Limited Product Warranty
Westone warrants this product to be free of defects in material or workmanship for
a period of one (1) year from the date of original retail purchase.This warranty is
available only to the original purchaser, and only if purchased from an authorized
Westone distributor or reseller. If your product is found to be defective during
the warranty period,Westone will, at its sole option, either repair the product or
replace the product with a new or factory reconditioned or substantially equivalent
model.This limited warranty does not apply to loss, theft, or any defects attrib-
utable to damage beyond the reasonable control of Westone including damage
caused by abuse, misuse, misapplication or modications performed by anyone
other than Westone. This warranty applies only to the external shell of the product,
the internal components and cable.
Repair/Replacement Warranty
This LimitedWarranty shall apply to any repair, replacement part or replacement
product for the remainder of the original warranty period or for ninety (90) days,
whichever period of time is greater. Any parts or product replaced under warranty
will become the property of Westone.
Requesting Warranty Support
Valid warranty claims are generally processed through the point of purchase during
the rst thirty (30) days after retail purchase.
Charging your Cable
Here are a few simple guidelines that can greatly
increase your listening enjoyment and the lifespan of
your Westone Bluetooth Cable:
1. Your Bluetooth cable comes partially charged so that
you can pair your device and start to listen to your music
immediately.
2. To charge your cable, remove the USB cover with your
ngernail and insert the USB cable that came with your
device. Plug the other end into a USB 120V adapter or into
a device that charges USB cables (such as a computer).
WARNING:
Never charge your Bluetooth Cable while it is being worn.

International
The warranty on this product if it is sold to a consumer outside of the United States
and Canada shall comply with applicable law. To obtain warranty service, contact
the dealer from which you purchased or the distributor that supplied this product.
Additional charges and limitations may apply. If purchased through an authorized
Westone retailer, but not through the local distributor or distributor’s network,
contact Westone directly (see United States & Canada instructions above). If
purchased in an international location without a Westone distributor, contact
Westone directly (see United States & Canada instructions above).
Limitation of Liability
Westone disclaims any and all implied warranties, warranties of merchantability
and tness for a particular purpose to the maximum extent permissible by law.
Westone shall not be liable for any special, incidental or consequential damages
caused by the use, misuse, or inability to use this product. If purchased under a
government contract, those contract terms supersede terms stated herein. In some
locations, implied warranties cannot be limited. Under certain conditions, these
limitations or exclusions may therefore not apply to you.This warranty replaces all
other warranties for this product.
United States & Canada
If it is necessary to return your product toWestone for warranty or post-warranty
service, contact Westone to request a return merchandise authorization (RMA)
number. You may call 1-877-290-3988 or go to https://www.westone.com/
store/music/index.php/productreturn to submit a Product Return Request
Form. Please note you will be required to submit reasonable proof of purchase
date, ownership, and that the product was purchased from an authorizedWestone
retailer. Once you receive your RMA number, package the product securely to
prevent damage in transit, include the documentation, and send prepaid and
insured through a trackable shipping carrier to:
Westone Laboratories, Inc.
Attn: Music Returns Dept.
2260 Executive Circle, Colorado Springs, CO 80906 USA
Westone will be responsible for shipping to the consumer after warranty repair/
replacement only. The customer is responsible for all shipping/handling charges
related to returning the product to Westone.

SRRCFCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation. Changes or modications not expressly approved
by the party responsible for compliance could void the user’s authority to operate
the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

At Westone, we value your satisfaction.
If you have any questions, please contact us:
Phone: [phone] | Email: [e-mail]
westoneaudio.com
Designed in Colorado, USA
© Westone Laboratories, Inc |The“Bluetooth®” wordmark and logos are registered trademarks
owned by Bluetooth SIG, Inc. any use of such marks is under license. | Other trademarks and
trade names are those of their respective owners. | Made in China | PN 92539 Rev2