Wet Sounds STEALTH SHIVR-55 User manual

STEAL TI-l
•
High Output Cooler Speaker System
Listen to your favorite tunes while keeping your food & drinks cold for days!
• Built-in Wet Sounds STEALTH 6 speaker system with DSP amplifier
• Built-in Bluetooth
• Built-in Lithium lon Battery pack for up to 8 hours of play time
• Aux input and Aux output- perfect for wireless linking multiple coolers with
optional A- Link
• AC charger included
• Fully
Rota-Molded Cooler for keeping food and drinks cold for days
• Double Wall insulation
•
Rope carrying handles and Rubber latches
·Lockable lid
• Eject
Button - Pressure relief button for Easy Open Lid
PASSION. PERFORMANCE. RUGGED FOR THE GREAT OUTDOORS!
Thank you for choosing Wet Sounds for your high performance audio system!
We build every product with Unsurpassed PASSION so we can deliver the
HIGHEST PERFORMING Products to you! We live and breathe high
performance audio and the SHIVR Cooler is no exception!
You can enjoy the very best sound reproduction anywhere - indoors or out!
We appreciate your passion for great audio!
Thank you for choosing Wet Sounds for your high performance audio needs.
wet
Wet Sounds STEALTH SH/VR-55 Cooler Operations I Installation Manual

Warning
DO NOT LEAVE THE SHIVR COOLER
UNATTENDED WHILE CHARGING!
The Stealth SHIVR-55 Cooler is equipped with a 1 OOOOmAh sealed
Lithium
lon battery for up to 8 Hours of play time.
Lift
the rubber cover from the 12V Charging Port and connect the
supplied AC Adaptor to the jack to charge the battery on the SHIVR
Cooler, which could take up to 7-8 hours depending on the state of
discharge of the battery .
The Charging Indicator will light solid red when the AC adaptor is
plugged into the charging jack & charging is in process .
In
battery mode the Charging Indicator light will show you the capacity
of the battery :
Solid green light- indicates a batterythat is 21 % - 100% charged
Solid red light- indicates a battery that is 6° /o - 20% charged
Blinking red light- indicates a battery that is less than
5% charged & should be connected to the charger immediately.
Wet Sounds STEALTH SH/VR - 55 Cooler Operat i ons I Installation Manual

Cooler
Instructions
Instruction
for
using
the
audio
portion
of
the
SHIVR
Cooler
1. Press and hold
the
power
button
for
3-5
Seconds
to turn
the
unit on.
2. Next,
select
what
source
you
want
to listen to,
either
Bluetooth
or
Auxiliary input.
3. Pairing with Bluetooth is easy, first press
the
BT/Aux
In button (4) on
the
SHIVR
control pad until it begins to flash blue,
next
turn on
your
blue tooth
device
and search
for
"SHIVR Cooler", then
select
it.
That's
it! You are
now
paired with
your
SHIVR
Cooler.
Stealth
SHIVR-55
Cooler
Control Panel
Wet
Sounds
STEALTH
SHIVR-55
Cooler
Operations
I Installation
Manual

Control Panel Instructions
wet
sounds
1. Reset
If needed, press to reset controller for BT pairing
2. Charging Indicator Light
Green 21 °/o - 1 00°/o Battery Capacity
Red
6o/o - 20°/o Battery Capacity
Blink Red -Less
5°/o Battery Capacity
3. Power - Play/Pause
Long Press - power on/off
Short Press -Play/Pause (BT only) Mute (Aux In only)
4. BT/Aux In
Blink Blue - BT pairing Mode
Short Press- Select BT or AUX In
Solid Blue Light -
BT Paired
No
Light- AUX In
Long Press -Disconnect
BT
5. Volume Increase
6. Previous Track
7. Next Track
8. Volume Decrease
9. DC 12 Volt Charging Port
Connect the supplied AC Adaptor or optional 12V Car Cord to
charge the
SHIVR battery.
10. AUX Input
Allows the connection of any music source with a
3.5mm jack such as a non-BT phone/MP3 player or
the Wet Sounds A-Link System for music sharing.
11. Line Output
Allows the connection of additional amplifiers/powered
subwoofers,
or Wet Sounds A-Link System for music sharing.
Wet Sounds STEALTH SH/VR-55 Cooler OperationsI Installation Manual