WFI 4-528 User manual

Mounting instructions
4-528
Extendable panel for cabinet

Mounting instructions
1
Remove top holder by
separating the drawer slides

Mounting instructions
2
Place the top holder on the roof of the cabinet
Position using the tab

Mounting instructions
3
4
Use sheet metal screws (10x)
to attach the top holder to the roof
Insert the panel into the drawer slides.
This requires two people.

Mounting instructions
5
Make sure the panel is straight before securing
the bottom holder with sheet metal screws (10x)

Mounting instructions
6
The cabinet must be secured to floor/wall using the attached L-brackets.
Below image shows possible attachment points. 2 brackets/cabinet.

Mounting instructions
7
Attention!
Maximum load per panel is 50 kg.
Do not pull out all three panels at the same time!