Wharfedale Pro Reason Series User manual

IMPORTANT SAFETY INSTRUCTIONS
1.
before operating them.
ers.
ers are already turned on. Make
ers LAST. It is
ers o rst,
and follow a routine for powering up and powering down a sound system. With all system components connected, turn
on source equipment (mixers, signal processors, record and playback units, etc.) BEFORE powering up ampli
Transient voltages from powering up source equipment can damage speakers if ampli
sure that ampli er volumes are set to their minimum settings and power up any system ampli
recommended that all system components be allowed to stabilize for several seconds before any source signals are
introduced or level setting adjustments are made. Similarly, when shutting systems down, turn all ampli
before powering down any other system components.
ers and speakers. Use only
approved speaker cables with proper connectors.
care with placement and operation to avoid exposure to excessive volume levels. Permanent hearing damage can result
when operated to extreme levels.
product. Warranty nulli cation could result if this is attempted.
8. RIGGING - SUSPENDING - MOUNTING - Rigging suspending or mounting of speaker systems can expose
members of the public to serious health risks and even death.
UNDER NO CIRCUMSTANCES ATTEMPT TO RIG, SUSPEND OR OTHERWISE MOUNT THESE SPEAKERS UNLESS YOU
ARE FULLY QUALIFIED AND CERTIFIED TO DO SO BY RELEVANT LOCAL, STATE AND NATIONAL AUTHORITIES. ALL
RELEVANT SAFETY REGULATIONS MUST BE FOLLOWED. IF YOU ARE NOT PROPERLY QUALIFIED OR DO NOT KNOW
OF PERTINENT REGULATIONS, CONSULT QUALIFIED PERSONNEL FOR ADVICE.
WHARFEDALE PRO LIMITED WARRANTY
Wharfedale Pro products are warranted of manufacturing or material defects for a period of one year from the original
date of purchase. In the event of malfunction, contact your authorized Wharfedale Pro dealer or distributor for
information.
*Be aware that warranty details may di er from country to country. Contact your dealers or distributor for information.
These terms do not infringe your statutory rights.
WHARFEDALE PROFESSIONAL
IAG House, 13/14 Glebe Road, Huntingdon, Cambridgeshire, PE27 7DL, UK
www.wharfedalepro.com
Wharfedale Professional reserves the right to alter or improve speci cations without notice.
All rights reserved © 2020 Wharfedale Pro. Wharfedale Pro is a member of the IAG Group.
Wharfedale Pro Reason Series
User Manual
Reason-X12 and Reason-X15

Wharfedale Pro also manufacture a wide range of power amplifiers and signal processors.
For recommended accessories, amplifiers and system diagrams please visit www.wharfedalepro.com
June 2020
SPECIFICATION
Model Name
System Type
Configuration
Frequency Response (+/-3dB)
Frequency Range (-10dB)
Sensitivity (2.83v/1m)
Calculated Maximum SPL @1m
System Rated Impedance
Low Frequency Transducer 
Size
Voice Coil Size
LF Magnet Material
LF Frame Material
Rated Impedance
LF Power re:AES2-2012
Mid Frequency Transducer
Size
Voice Coil Size
Reason-X12
Passive
Three-way
55Hz - 20kHz
50Hz - 20kHz
98dB
131dB
8Ω
75mm / 3.0''
332mm / 12''
ferrite
Aluminium
8Ω
400W
203.8mm / 8''
50.8mm / 2.0''
Passive
Three-way
45Hz - 20kHz
40Hz - 20kHz
99dB
133dB
8Ω
75mm / 3.0''
404mm / 15''
ferrite
Aluminium
8Ω
500W
203.8mm / 8''
50.8mm / 2.0''
MF Magnet Material
MF Frame Material
Rated Impedance
MF Power re:AES2-2012
Coil Size (mm / inches)
High Frequency Transducer
HF Driver Type
Dimensions - Packed (mm / inches):
Dimensions - Unpacked (mm / inches):
Exit Size (mm / inches)
Height
Width Front
Width Rear
Depth
Height
Width Front
Width Rear
Depth
Weight
Net Weight (kg / lbs)
Gross Weight (kg / lbs)
ferrite
Aluminium
38mm / 1.5"
25mm / 1"
8Ω
814mm / 32.0"
350mm / 13.8"
410mm / 16.1"
500mm /19.7"
231mm / 9.1"
440mm /17.3"
29.0kg / 63.8lbs
33.7kg / 74.2lbs
500mm /19.7"
909mm /35.8"
Compression Driver
ferrite
Aluminium
38mm / 1.5"
25mm / 1"
8Ω
100W 100W
883mm / 34.8"
430mm / 16.9"
455mm / 17.9"
545mm /21.5"
298mm / 11.7"
520mm/20.5"
32.5kg / 71.5lbs
37.5kg / 82.5lbs
545mm /21.5"
978mm /38.5"
Compression Driver
HF Magnet Material
Diaphragm Material
Rated Impedance
HF Power re:AES2-2012
Waveguide Type
Nominal Coverage (H x V)
Nominal Impedance
Power
System Continuous Power (W)
System Programme Power (W)
System Peak Power (W)
Crossover Frequency
NdFeB
PEN
square
40W
100 x 70
8Ω
8Ω
500W
2000W
800Hz / 2.7kHz
NdFeB
PEN
square
40W
100 x 70
8Ω
8Ω
600W
2400W
1000W 1200W
800Hz / 2.7kHz
Input Connector
Rigging
Handles
Enclosure
Colour Options
Cabinet Type
Enclosure Material and finish
Grille Material & Finish
Reason-X15
2 x speakON
M8 x 12
Black paint
2
15mm plywood
2 x speakON
M8 x 12
Black paint
Steel Steel
2
Trapezoid Trapezoid
15mm plywood
OVERVIEW
Reason-X12
410.0
258.046.0
46.0
95.0
258.046.0
95.0
46.0
350.0
814.0
46.0
Reason-X15
455.0
338.046.0
125.0 46.0
338.046.0
125.0
46.0
46.0
430.0
883.0