
Congratulations on the purchase of your WLA-28SUBA. We take great pride in engineering and building every
Wharfedale Pro product and wish to thank you for entrusting us with your audio.
From the time Gilbert Briggs built his first loudspeaker in 1932, to the present day, we have maintained the same
standard of quality in components, workmanship and performance.
Please take the time to read this guide completely in order to get the most from your new active PA.
Your full user manual can also be downloaded from www.wharfedalepro.com
AC IN: AC Input using PowerCon connector
AC LINK: For cascade power to other active loudspeakers
in the system. DO NOT EXCEED A TOTAL OF 20 A (continuous
current powerCon limit) for each line.
POWER: Power on switch. Only power on after all audio
connections have been made.
BREAKER 20 A: Circuit breaker with push button manual
reset.
INPUT: Balanced Combi jack / XLR input
LINK: Balanced line output
PRESET: DSP Preset control selector.
AUDIENCE or STAGE presets can be used in an Inverted
Stack Gradient array configuration.
UPDATE: USB Input for software update. Service staff only.
NETWORK: Network connection using RS485 protocol.
Download the software from www.wharfedalepro.com
WLA-28SUBA
QUICK START GUIDE
Your full user manual can also be downloaded from
www.wharfedalepro.com
System Type
Frequency Response (+/-3dB) 39 Hz - 125 HZ
Frequency Range (-10 dB) 35 Hz - 163KHz
Loudspeaker Sensitivity @ 1W / 1m)
108 dB
Maximum SPL(peak)(@1m) 145 dB
Nominal Coverage (H x V) -
Signal Processing DSP based,8 presets resident in Input
Module
Preset list
A) FLOWN
B) FLOWN with 218
C) STACK
D) STACK with 218
E) CARDIOID AUDIENCE
F) CARDIOID STAGE
G) CUSTOM
H) CUSTOM
Amplifiers
Amplifier Design Class D
Power Rating: 4000 W Peak / 2000 W Continuous
Power On Protection
Thermal Protection
Amplifier Shut Down. Auto Reset
Low Line Voltage Shut Down
Driver Protection
Independent L/ H Limiters and DC
DC and Short Protection
Limiter Indicator Red LED
Signal Indicator
Power/Active Indicator
Find Function Indicator
Input Sensitivity
Maximum Input Level
Input Impedance Balanced: 10 KΩ
AC Power details - Power Supply High Efficiency Switching Mode
Power Supply
Connectors
Input Connector
〞
Link Connector
Balanced Male XLR Connector
UPDATE
NETWORK (RS485)
AC Power Options
AC Input Connector powerCON compatible
AC Loop Through Connector
Hardware - Rigging Integral side plate
Enclosure Material and finish
Colour Options
Grille Material & Finish
Unpacked dimensions - Height 485 mm / 19.1"
Width (Front) 760 mm / 29.9"
Width (Back) 760 mm / 29.9"
Depth 775 mm / 30.67"
Packed Dimensions - Height 575 mm / 22.6"
Width (Front) 850 mm / 33.5"
Width (Back) 850 mm / 33.5"
Depth 865 mm / 34.6"
Net Weight (Kg / lbs) 67.0 Kg /147.4 lbs
Gross Weight (Kg / lbs) 74.3Kg /163.5 lbs