Whirlpool LE5700XM User manual

7
AUTOMATIC
DRYERS
Electric Model
LE5700XM
and
Gas Model
LG5701XM
owave Ovens, Trash Compactors, Room Air Condltloners, Oehumldlflers, Aulomatlc Washers, Clothes Dryers. Freezers. Refrlgeralor-Freeze

Parts andIfeatures
CYCLE CONTROL KNOB
LAUNDRY INFORMATION CENTER
TEMPERATURE SELECTOR
START BUTTON
LINT SCREEN
DRYER DRUM
LOADING DOOR
MODEL AND
SERIAL NUMBER
PLATE
Remove the Con-
sumer Buy Guide la-
bel before using
your dryer. It will be
easier to remove.
Wipe out the
dryer drum with a
damp cloth to re-
move dust from stor-
ing or shipping.
Copy your Model
and Serial Numbers here
When you need service or call with a
questton. have this tnformation ready Complete Model Number
1. Complete Model and Serial Numbers
(from the plate located as shown).
2. Purchase date from sales slip.
Complete Serlol Number
Copy this information in these spaces.
Keep this book, your warranty, sales slip Purchase Date
and “Dryer Guide” in the Laundry Infor-
mation Center on the back of the dryer
console Serv,ce Company and
Telephone Number
There is no warranty registration to return. Proof-of-purchase IS all
that IS required for in-warranty service.
Contents
PARTS AND FEATURES
YOUR RESPONSIBILITIES
SAFETY FIRST
SELECTING A CYCLE AND
STARTING YOUR DRYER
OPERATING INSTRUCTIONS
Dryer Setting and Cycles
Cool Down Times
DRYING TIPS
FLUFFAIR
TUMBLE PRESS” Setting
Mixed Loads
Page2
3
3
4
6
6
6
7
7
7
7
Drying Times
LINT SCREEN
LINT REMOVAL
CARING FOR YOUR DRYER
Vacation Care
IF YOU NEED SERVICE OR
ASSISTANCE
1. Before Calling for
Assistance
2. If You Need Assistance
3. If You Need Service
4. If You Have a Problem
Page 7
i
9
9
IO
10
11
11
11
2 al984 Whirlpool Corporation

Your
Responsibilities
Read this “Use and Care Guide”
and your “Dryer Guide” carefully for
important use and safety information.
You are personally responsible for
making sure that your dryer...
l is installed by a qualified installer.
l is properly maintained.
l is installed in an area protected
from the weather.
l is properly installed and leveled in
a well ventilated room’ on a floor
that can support the weight.
l is located in an area where the tem-
perature is above 45°F (7.2 C).
l is connected to the right kind of out-
let. electric supply and grounding.*
l is properly connected to fuel and
exhaust systems.’
l is used only for jobs normally ex-
pected of home clothes dryers.
l is not run where there may be explo-
sive fumes.
l is not used by children or anyone
unable to operate it properly.
‘See the “Installation Instructions” for
complete information.

SUGGESTED SUGGESTED
TYPE OF LOAD CYCLE TEMPERATURE
COTTONS - LINENS
EXTRA HEAVY - Bedspreads,
mattress pads, quilts,. EX HEAVY
HEAVYWEIGHT FABRICS - Towels, PERM’T
jeans, corduroys, work clothes HEAVY PRESS
MEDIUMWEIGHT COTTONS - HEAVY
Sheets, pillowcases, cotton HIGH
underwear, diapers _. MEDIUM
LIGHTWEIGHT COTTONS - Batistes,
organdies, lingerie _. LIGHT
PERMANENT PRESS, SYNTHETICS PERMIT PRESS
AND BLENDS
HEAVYWEIGHT FABRICS -Work clothes, PERMIT
jackets, raincoats 40-50 MINS. PRESS
MEDIUMWEIGHT FABRICS - Shirts, play HEAVY
clothes, sheets, slacks 30-40 MINS. HIGH
LIGHTWEIGHT FABRICS - Lingerie,
blouses, dresses 20-30 MINS.
KNITS PERM’T PRESS
HEAVYWEIGHT - Cottons, rayons, PERM’T PRESS
blends.T-shirts, slacks, shirts _. _. 40-50 MIN.% HEAVY HIGH
LIGHTWEIGHT - Synthetics (polyester,
acrylic, etc.) and blends, lingerie, KNITS GENTLE
blouses, dresses _. 30-40 MINS. LOW
LIGHTWEIGHT AND DELICATE FABRICS
Sheer Curtains (2 or 3 panels] 20-30 MINS.
PERM’T PRESS KNITS GENTLE
Gauze, lace.etc. 15-20 MINS. LOW
RUBBER, PLASTIC, HEAT-SENSITIVE PERM’T PRESS
FABRICS
FOAM RUBBER - Pillows, bras,
stuffed toys 20-30 MINS. FLUFF
PLASTIC - Shower curtains, AIR
tablecloths _. 20-30 MINS.
RUBBER-BACKED RUGS 40-50 MINS.
OLEFIN, POLYPROPYLENE, SHEERNYLON 15-20 MINS.
Drying these and other heat-sensitive
materials can damage them or be a
FIRE HAZARD.

Select a
1. CYCLE Set TEMPERATURE
2. SELECTOR
Turn the Control Knob either way to
point to the cycle and setting you
want. See page 6 for information on
the cycles.
Push the
3. START Button
The dryer will start tumbling when
you push the START Button.
Changing a setting
The setting can be changed at any
time by turning the Control Knob to a
new setting.
Turn the Temperature Selector to the
needed drying temperature.
To stop and restart
the dryer
To stop the dryer, open the door (or
turn the Control Knob to OFF).
To restart the dryer, close the door,
Select cycle, if necessary, and push
START.
The Cycle Control Knob should point to OFF when the dryer is not in use.

Operating instructions
Dryer cycles and settings Cool down times
The PERMANENT PRESS Cycle helps
provide the special care that perma-
nent press and synthetic fabrics
need...a period of heated drying
followed by a IO mrnute cool down.
The chart on page 4 suggests time
and temperature settings for different
krnds of loads,
The EX HEAVY, HEAVY, MEDIUM and
LIGHT cycles describe the loads
they are designed to dry.The chart
on page 4 tells what is meant by
EX HEAVY, HEAVY, MEDIUM and LIGHT
loads.
At each setting, the dryer will run
about long enough to dry the load
described by the setting. Example:
The HEAVY Cycle is designed to be
long enough to dry a load of heavy
fabrics [towels, jeans, corduroys, etc.)
when the Temperature Selector is set
on PERM’T PRESS/HEAVY HIGH.
I
f MOPETIME LESSTIME -b I
If the load is not as dry as you want,
set the dial more to the left the next
time you dry that kind of load.
If the load is dryer than you want,
set the dial more to the right the next
time you dry that kind of load.
In all cycles, the heat shuts off
before the dryer stops tumbling. This
cool down time helps:
l keep wrinkles from setting in.
l make handling the hot load items
easier.
I
lo GNUTES 5 MlNUiES
COOL DOWN COOL DOWN I
The PERMANENT PRESSCycle has
10 minutes of cooldown time at the
end of the cycle.
411other cycles have 5 minutes of
cool down time.
6

Drying tips
FLUFF AIR
The dryer does not heat when the
Temperature Selector is set on FLUFF
AIR.The setting is useful for fluffing
bedding, pillows and clothing,or
dusting drapes.
Use FLUFFAIR when drying heat-
sensitive items, such as plastic
shower curtains, rubber-backed
rugs, plastic tablecloths,foam rubber
pillows, stuffed toys, sneakers, etc.
1. Set Temperature Selector on
FLUFFAIR.
2. Turn Control Knob to the number of
minutes you want in the PERMANENT
PRESSCycle.
3. Push STARTButton.
Mixed loads
When drying a load with different
kinds and weights of fabrics, use the
cycle suggested for the lightest
fabrics. When the dryer stops, remove
dry items and resetthe control.
TUMBLE PRESS” Setting
The TUMBLE PRESSsetting removes
wrinkles from dry clothing such as
items that may have been packed
in a suitcase, closet, or items not
removed from the dryer.
1. Set Temperature Selector on PERMIT
PRESS/HEAVY HIGH.
2. Set Control Knob on TUMBLE PRESS.
3. Push STARTButton.
The load will tumble in heated air
for 5 minutes. The heat shuts off and
the dryer continues to tumble the
load for 10 more minutes.
For best results, TUMBLE PRESSonly
a few items at a time. Put them on
hangers or fold them as soon as the
dryer stops.
Drying times
Drying times will vary depending on:
l amount of moisture in the clothes.
l type and weight of the fabric.
l size of the load.
l room temperature around the
dryer.
l temperature of the wash and
rinse water.
l amount of lint in the lint screen.
l dryer temperature selection.
See page 6 in your”Dryer Guide”
for more information. 7

Lint screen
Clean the lint screen before each load. A screen blocked by lint can
increase drying time and may be a FIRE HAZARD.
Open the lid and pull the lint screen ROLL the lint off the screen
straight out. with your fingers.
0
DO NOT run the dryer with DO NOT rinse or wash the screen.
the lint screen loose, Push the screen firmly back into
damaged or missing. place.
Doing so can cause over-
heating, can damage fabrics and
can be a FIRE HAZARD.
Lint removal
Lint can gather inside the dryer and create a fire hazard.This lint
should be removed every 2 to 3 years, or more otten, depending on
dryer usage.
ELECTRIC DRYERS \\ ’
GAS DRYERS
Cleaning should be done only by a qualified person.
0
l Avoid electrical shock
hazard - unplug power
supply cord or turn off
electrical power.
l Avoid injury or damage - do not
put hands inside cabinet.
l Make sure dryer is cool.
8
1. Remove back panel (electric) or
front panel [gas).
2. Avoid damaging wires, ther-
mostats, funnel or igniter.
3. Remove lint from shaded area -
see art - with a soft brush or
vacuum cleaner.
4. Replace panel; reconnect and re-
level dryer.

Caring for your dryer
Remove shzp objects from clothing
betore drying - pins, buckles, etc.
Close metal zippers.
Wipe off all spills with a damp, soft
cloth.Spills allowed to remain may
dull or damage the finish.
Never leave wet or damp laundry in
your dryer.
Sharp or heavy objects should
never be put on or in the dryer.
Check pockets for bolts, nuts, etc.
Non-colorfast items can stain the
drum. Wipe carefully after drying to
make sure there is no dye to be
transferred to items in the next load.
Vacation care
Disconnect power
supply cord.
Some pretreatment products can
damage dials, console and finish. Do
not use these products on or near
your dryer.
Clean lint screen.
9

If you need service or assistance, we suggest
you follow these four steps:
I. Before calling for
assistance.. .
Performance problems often re-
sult from little things you can find
and fix yourself without tools of any
kind.
DRYER DOES NOT RUN:
DRYER DOES NOT HEAT:
l The AIR setting is without heat.
l The last minutes of heat settings are
without heat.
l Is gas turned on? If not,turn Control
Knob to OFF.Turn on gas. Waif 5
minutes. Reset controls and start
l An electric dryer has two fuses, if
not a circuit-breaker. If one is
blown, the dryer may run, but not
heat.
DRYING TIME SEEMS LONG:
Is power supply cord plugged
Is door closed tightly?
Did you push START Bution?
in?
Are fuses blown or a circuit-breaker
tripped?
l IS the lint screen clean?
l See oaae 6 in vour”Drver Guide:’
10

2. If you need assistance*...
Call Whirlpool COOL-LINE’R serv-
ice assistance telephone number.
Dial free from:
Continental U.S. . [phone]
Michigan . . . . . . . [phone]
Alaska I Hawaii [phone]
and talk with one of our trained Con-
sultants. The Consultant can instruct
you in how to obtain satisfactory op-
eration from your appliance or, if
service is necessary, recommend a
qualified service company in your
area.
3. If you need service*...
Whirlpool has
a nationwide net-
work of franchised
TECH-CARE@ Serv-
7nw-CAR~
, FRANCHISEDSERVICE ice Companies.
1 TECH-CARE serv-
ice technicians are trained to fulfill
the product warranty and provide
after-warranty service, anywhere in
the United States. To locate TECH-
CARE service in your area, call our
COOL-LINE service assistance tele-
phone number [see Step 2) or look in
your telephone directory Yellow
Pages under:
4. If you have a problem*...
Call our COOL-LINE service as-
sistance telephone number (see
Step 2) and talk with one of our Con-
sultants, or if you prefer, write to:
Mr. Guy Turner, Vice President
Whirlpool Corporation
Administrative Center
2000 US-33 North
Benton Harbor, Ml 49022
*If you must call or write, please pro-
vide: model number, serial number,
date of purchase, and a complete
description of the problem. This in-
formation is needed in order to bet-
ter respond to your request for
assistance.
0
FSP IS o reglslered trademark
of Whirlpool Corporation for
FSP
quatlty parts took for this
symbol of quality whenever
you need o replacement port
R for your Whirlpool appliance
FSP replacement parts
wll fit right and work right. because they are
made to the some exacting speciflcatlons
used to build every new Whirlpool appliance

whirlpool
Home A /Appliances
Maklng your world a httle easier
Part No. 691272 Rev. A
al984 Whirlpool Corporation Printed in U.S.A.
lmatlc Washers. Clothes Dryers. Freezers. Refrlgeralot-Freezers. Ice Makers. Dishwashers, Bwlt-In Ovens and Surface Units, Ranges, MIC: