Whirlpool LER5848DQ0 User manual

Tkfl 01”
4a
Home Appriance
HOWToAumEAHoh&~m
UseAndCare
A Note to You.. ...................... 2
Dryer Safety ....................... 3-4
Parts and Features ............... 5
Operating Your Dryer ........... 6
Before starting your dryer ...6
Starting your dryer .............. 6
Stopping/restarting
your dryer.. .......................... 6
Selecting the right cycle
and setting .......................... 7
FINISH GUARD@ feature ....8
Selectable end of cycle
signal ................................ 10
Using the drying rack ........ 11
Caring for Your Dryer ......... 12
Laundry Tips.. ...................... 17
Troubleshooting .................. 21
Requesting Assistance
or Service ............................. 23
Warranty .............................. 24
1-800-253-I 301
Call our Consumer Assistance Center
with questions or comments.
EASY-TO-USE ELECTRIC AND GAS DRYERS &WI
PART NO. 3401096 (E-Line)

A Note to You
Thank you for buying a WHIRLPOOL@ appliance.
Because your life is getting busier and more complicated, WHIRLPOOL dryers are easy
to use, save time, and help you manage your home better. To ensure that you enjoy years
of trouble-free operation, we developed this Use and Care Guide. It contains valuable
information about how to operate and maintain your dryer properly and safely. Please read
it carefully. Also, please complete and mail in the Ownership Registration Card provided with
your appliance. The card helps us notify you about any new information on your appliance.
Please record your model’s information.
Whenever you call to request service on
Model Number
your appliance, you need to know your
complete model number and serial number.
Serial Number
You can find this information on the model
Purchase Date
and serial number label in the door well (see
Dealer Name
diagram on page 5 for location of label).
Please also record the purchase date of
your appliance and your dealer’s name,
address, and telephone number.
Dealer Address
Dealer Phone
Keep this book and the sales slip together in a safe place for future reference.
I
Our Consumer Assistance Center
number is toll-free 24 hours a day.
1-800-253-1301 1

Dryer Safety
Your safety is important to us.
This guide contains safety statements under
warning symbols. Please pay special
attention to these symbols and follow any
instructions given. Here is a brief explana-
tion of the use of the symbol.
Thls symbol will help alert you to
such dangers as flre, electrlcal shock,
burns, and personal Injury.
IMPORTANT SAFETY INSTRUCTIONS
For your safety, the information in this
manual must be followed to minimize the
risk of fire or explosion, or to prevent
property damage, personal injury, or loss
- Do not store or use gasoline or other flammable vapors and liquids
in the vicinity of this or any other appliance.
- WHAT TO DO IF YOU SMELL GAS:
l Do not try to light any appliance.
l Do not touch any electrical switch; do not use any phone in
your building.
l Clear the room, building, or area of all occupants.
l Immediately call your gas supplier from a neighbor’s phone.
Follow the gas supplier’s instructions.
l If you cannot reach your gas supplier, call the fire department.
Installation and service must be performed by a qualified installer,
service agency, or the gas supplier.
continued on next page

ImDortant Safetv Instructions
n - ~ I
To reduce the risk of fire, electrical shock, or
injury to persons when using your dryer, follow
basic precautions, including the following:
l Read all instructions before using your l Do not allow children to operate, play
dryer. with, or crawl inside your dryer. Super-
@Dryer must be electrically grounded. See vise children when your dryer is used
the Installation Instructions. near children.
l Do not machine wash or machine dry l Do not reach into a dryer if the drum
items cleaned, washed, soaked in, or is moving.
spotted with wax, paint, gasoline, oil, dry l Install and/or store dryer where it will not
cleaning solvents, or other flammable be exposed to the weather.
fluids. The fumes can create a fire hazard l Do not tamper with the controls.
or explosion. Always hand wash and line
dry items containing these materials. l Do not dry rubber, rubber-like, or heat-
sensitive materials with heat.
l Do not wash or dry items that are soiled
with vegetable or cooking oil. These l Unplug the power supply cord or turn off
items may contain some oil after launder- electrical power before attempting to
ing. Due to the remaining oil, the fabric service your dryer. Also, shut off gas
may smoke or catch fire by itself. valve if you have a gas dryer.
*Store flammable solvents or fluids away l When removing from service or discard-
from your dryer. ing a dryer, always remove the door to
l Dry cleaning solvents or fluids should prevent accidental entrapment.
never be put directly into your dryer. l Clean lint screen before or after each
load.
*Do not let dust, lint, paper, rags, chemi-
cals, etc., pile up around or under the l Use only fabric softeners specifically
dryer. labeled as not being harmful to the dryer.
l Do not allow lint to build up inside the
dryer or exhaust system. Cleaning should
be done periodically by a qualified
person.
Understanding your responsibilities
l Be sure that your dryer: -is used only for jobs normally expected of
-is located in an area where the home clothes dryers.
temperature is above 45°F (7°C). -is not used by anyone unable to operate
-is properly installed in a well-ventilated it properly.
room and leveled on a floor that can l Never operate the dryer if:
support the weight.* - it is not working right (i.e. noisy, too hot).
-is connected to the proper outlet and -it is damaged.
electrical supply.*
-is properly connected to fuel and -parts are missing.
exhaust systems (gas dryers must be -all panels are not in place.
vented outdoors).* -the lint screen is loose, damaged, or
-is not installed against draperies or missing.
curtains, or on carpet.* *See the Installation Instructions for com-
-is properly maintained, repaired, and has plete information.
parts replaced by a qualified person.
4
- SAVE THESE INSTRUCTIONS -

Parts and Features
The parts and features of your dryer are illustrated below. Become familiar with all parts and
features before using your dryer. Page references are included next to some features. Refer
to those pages for more information about the features.
Fabric/Temperature FINISH GUARD@’
selector
(P. 8)
Cycle signal selector/
Start button
(PP. 6, 10)
Assistance
Center number
(1-800-253-l 301)
Lint screen
(P. 12)
Model and serial
number label
(P. 2)
Dryer drum
(P. 13)
Wide-opening
hamper door
Other features not shown:
Drying rack (available as an option) (p. 11)
Drum light (p. 13)
Control Panel

Operating Your Dryer
The information in this section helps you learn to use your dryer efficiently and safely. Refer
to “Laundry Tips” on page 17 for additional information on sorting, loading, and drying most
types of washables.
Before starting your dryer
Before using your dryer, wipe the dryer drum
with a damp cloth to remove
dust from storing and shipping.
Starting your dryer
1. Load clothes into the dryer and close
the door.
3. Turn the Cycle Control Knob to the cycle
L
that corresponds with the one
hr. you chose on the Fabricflemp
A Selector.
2. Turn the Fabric/Temp Selector to the 4. Push the Start Button.
desired setting (see page 7.)
NOTE: Your dryer stops automatically when
a cycle ends.
Stopping/restarting your dryer
You can stop your dryer anytime during
a cycle.
To stop the dryer, either:
l Open the dryer door. desired).
l Turn the Cycle Control Knob
to OFF.
To restart the dryer:
1. Close the door.
2. Select a new cycle and temperature (if
3. Push the Start Button.
NOTE: The Cycle Control Knob should point
to an OFF area when the dryer is not in use.
6

Selecting the right cycle and setting
The following pages describe the cycles on
your dryer. Refer to the charts on pages 9-l 0
for help in selecting drying cycles.
Drying guidelines
l Always follow care label directions when l Overdrying can cause shrinkage, static
they are available. cling, and damage to some fabrics.
l Use the Fluff Air cycle, or line dry rubber, l Refer to pages 17-20 for information
plastic, delicate, and heat-sensitive fabrics about:
(see page 10). -sorting clothes for drying
l The last few minutes of all cycles are without
heat to make the load easier to handle. _
choosing load sizes
l To help reduce wrinkling, remove the load - drying tips
from the dryer as soon as tumbling stops. _ using dryer fabric softeners
This is especially important for permanent - saving energy
press, knits, and synthetic fabrics. - drying special-care items.
Your easy-to-use dryer has a color-coordi-
nated Cycle Control Knob and Fabric/
Temperature Selector. When using the
automatic cycles, simply choose the setting
on the Cycle Control Knob that corresponds
with the one you chose on the Fabric/Temp
Selector. When using Timed Drying, choose
High, Medium, or Low heat with the Fabric/
Temp selector. (See chart on page 9.)
Automatic Cycle(s)
Your dryer has five Automatic cycles (Heavy,
Normal, Wrinkle Resist, Quick Dry, and
Delicate) and three corresponding tempera-
ture selections. All of the Automatic cycles
use an Electronic Sensor Dry control that
senses the amount of moisture in the load.
FabticlTemp
Your Automatic cycle(s) shuts off when the
selected dryness is reached. The Cycle
Control Knob will not move until the load is
almost dry. After the cool-down and the
FINISH GUARD@ portion of the cycle (if
selected), the Knob automatically turns to an
OFF area and tumbling stops.
l If the load is drier than you like, select a
setting closer to LESS DRY the next time
you dry a similar load.
l If the load is not as dry as you like, com-
plete drying using the Timed Drying cycle.
Select a setting closer to VERY DRY the
next time you dry a similar load.
7

Timed Drying Cycle
Use the Timed Drying cycle (high, medium,
or low heat) to complete drying if some
items are damp after Automatic drying.
Timed Drying is also useful for:
l Delicate items and small loads that need
a short drying time.
l Bulky items and large loads that require a
long drying time.
Damp Dry Feature
Use the Damp Dry feature in the Timed
Drying cycle to dry items to damp level, or to
dry items that do not require an entire drying
cycle. Two examples are heavy cottons,
such as jeans, which you do not want to
become stiff, or cotton clothes which are
easier to press when damp.
TUMBLE PRESS” Feature
The TUMBLE PRESS feature in the Timed
Drying cycle removes wrinkles from clothes
that have been packed in a suitcase or
closet, or from items not removed from the
dryer at the end of a cycle. As soon as the
dryer stops, fold or put the items on hangers.
Fluff Air Cycle
The Fluff Air cycle has no heat. Use this
unheated cycle to fluff or air dry bedding,
plastic tablecloths, foam pillows, sneakers,
etc. See page 10 for more information about
the Fluff Air cycle.
FINISH GUARD@ feature
When you are unable to remove a load from
the dryer as soon as it stops, wrinkles can
form. The FINISH GUARD feature tumbles
the load without heat every few minutes up
to 45 minutes after the cycle ends. This
tumbling rearranges and fluffs the load to
avoid wrinkles.
The FINISH GUARD feature is available in
all of the Automatic cycles and the Timed
Drying cycle. Simply turn the FINISH
GUARD Selector to On or Off. If the Selec-
tor is On and you do not open the dryer door
within a few minutes after the cycle stops,
the FINISH GUARD feature takes over to
protect the load.
A signal sounds every few minutes when
FINISH GUARD is running. The signal and
cycle stop when you open the dryer door.
FInIshQuad

Timed Drying
For most loads, use an Automatic cycle
(see page 7). If you choose not to use an
Automatic cycle, then use the Timed Drying
chart below as a guideline. Remember to
always follow care label directions when
they are available.
Timed Drying Chart
TYPE OF LOAD TIMED DRYING
(minutes)
High Medium Low
ZOlTONS AND LINENS
Extra Heavy
Bedspreads, mattress pads, quilts
ieavyweight
Towels, jeans, corduroys, work clothes
bledlumweight
Sheets, cotton underwear, diapers
Lightweight
Batistes, organdies, lingerie
70
50-60
40-50
20-30
PERMANENT PRESS,
SYNTHETICS, AND BLENDS
Heavyweight
Work clothes, jackets, raincoats
Mediumweight
Shirts, play clothes, sheets, slacks
Lightweight
Lingerie, blouses, dresses
40-50
30-40
20-30
KNITS
Heavyweight
Cottons, rayons, blends, T-shirts,
slacks, shirts
Mediumweight
Synthetics (polyester, acrylic, etc.),
dress slacks, skirts, sweaters
Lightweight
Synthetics (polyester, acrylic, etc.) and
blends, lingerie, blouses, dresses
40-50
30-40
20-30
DEFICATES’
Sheer curtains (2 or 3 panels),
gauze, lace, etc. 20
l Fluff Air cycle or line drying is also recommended for delicate fabrics. (See page 10.)
9

Fluff Air cycle or line drying
The chart below includes examples of items
that require drying without heat. Use the
Fluff Air cycle, or place the items on a line or
rack to air dry.
NOTES:
l Heat-sensitive fabrics should not be dried
in the dryer.
l Line dry bonded or laminated fabrics.
l Always follow care label directions when
they are available.
Flre Hazard
Use Fluff Air cycle to dry items
llsted below.
Do not use heat to dry these items.
Failure to do so can result in death
or fire.
TYPE OF LOAD FLUFF AIR CYCLE*
(minutes)
DELICATE FABRICS
Sheer curtains (2 or 3 panels), gauze, lace, etc. 20-30
RUBBER, PLASTIC, HEAT-SENSITIVE FABRICS
Foam Rubber - Pillows, padded bras, stuffed toys
l Make sure coverings are securely stitched.
l Shake and fluff pillows by hand several times during the Fluff
Air cycle.
l Make sure pillows are completely dry. Foam rubber pillows
take a long time to dry.
Plastic - Shower curtains, tablecloths
Rubber-backed rugs
Olefin, Polypropylene, Sheer nylon
20-30
20-30
20-30
10-20
COlTON AND CANVAS SHOES
l Place several bath towels in the dryer to act as a buffer, or 20-30
place shoes on a drying rack if your dryer has one.
l Remove shoes from dryer while still damp.
l Stretch shoes and allow to air dry.
l Reset cycle as needed to complete drying.
Selectable end of cycle signal
The dryer sounds a signal to let you know
when the cycle is finished. The signal is
helpful when you are drying permanent
press, synthetics, and other items that
should be removed from the dryer as soon
as it stops. The signal can be turned On
or Off.
10 I
FlnlshGufud

Using the drying rack
(available as an option)
To order the drying rack (Part #/692990), write:
Whirlpool Corporation
Parts Distribution Center
123 Koomler Drive
LaPorte, IN 46350
The drying rack lets you dry items that you
may not want to tumble. The rack does not
move, but the drum turns.
1. Fit rear legs of the rack into indentations in
the back wall of the dryer.
Lower the front so the legs
rest on the dryer opening.
ms on top of the rack. Leave
space between the items so air
can reach all surfaces.
NOTE: Make sure nothing
hangs over the edge of the rack.
3. Close the door.
4. Select the Timed Drying cycle (and
temperature, if needed) or the Fluff Air
cycle (see page 10).
5. Push the Start Button.
c 1
lizd
NOTES:
l See the chart below for suggested cycles
and settings for the different types of items
that might best be rack dried.
l The rack must be removed for normal
tumbling.
l Drying time will depend on how much
moisture the items hold. The following
chart suggests drying times.
l Automatic cycles do not work with the
drying rack.
RACK DRY CYCLE TEMPERATURE TIME’
(minutes)
Wool sweaters Timed LOW 60
(Block to shape and lay flat on the rack) Drying
Stuffed toys or pillows Timed LOW 60
(Cotton or polyester fiber filled) Drying
Stuffed toys or pillows Fluff Air None; cycle is unheated. 70
(Foam rubber filled)
Sneakers or canvas shoes 30-40
l Reset cycle as needed to complete drying.
11

Caring for Your Dryer
Proper care of your dryer can extend its life. This section explains how to care for your dryer
properly and safely.
Cleaning the lint screen
Every load cleaning
The lint screen is located under a lid on top
of the dryer. Clean it before each load. A
screen blocked by lint can increase drying
time.
To clean:
1. Open the lid and pull the lint screen
-zzl
towards you.
2. Roll lint off the screen with your fingers.
Do not rinse or wash screen to
remove lint. Wet lint is hard to
remove.
3. Push the lint screen firmly back into place
and close the lid.
IMPORTANT:
l Do not run the dryer with the lint screen
loose, damaged, blocked, or missing.
Doing so can cause overheating and
damage to both the dryer and fabrics.
l Some towels made of synthetic fibers and
natural fibers (polyester and cotton blends)
may shed more lint than other towels,
causing your dryer’s lint screen to fill up
faster. Be sure to remove lint from the lint
screen before and after drying new towels.
As needed cleaning
Laundry detergents and fabric softeners can
cause a residue buildup on the lint screen.
Clean the lint screen with a nylon brush
every six months or more frequently if it
becomes clogged due to a residue buildup.
Use the following method:
1. Wet both sides of lint screen with hot
water.
2. Wet a nylon brush with hot water and
liquid detergent; scrub lint
screen with the brush to
remove residue buildup.
3. Rinse screen with hot water.
4. Thoroughly dry lint screen with a clean
towel; replace in dryer.
12

Cleaning the dryer interior
Garments which contain unstable dyes,
such as denim blue jeans or brightly colored
cotton items, may discolor the dryer interior.
To clean dryer drum:
1. Make a paste with detergent and very
warm water.
2. Apply paste to a soft cloth and scrub area
until all excess dye is removed.
OR
Apply liquid nonflammable
household cleaner to the
stained area and rub with a
cloth until all excess dye is removed.
3. Wipe thoroughly with a damp cloth.
4. Tumble a load of rags to dry.
Explosion Hazard
Use nonflammable cleaner only.
Failure to do so can result in death,
explosion, or fire.
Changing the drum light
The dryer light automatically turns on inside
the dryer drum when you open the door.
To change drum light:
1. Unplug the dryer or disconnect the
electricity leading to the dryer at the main
power supply.
2. Open the dryer door. Remove the light
bulb cover from the back wall
of the dryer by turning the
cover clockwise.
3. Remove the light bulb by turning it
counterclockwise.
4. Replace the bulb with a 40-watt appliance
bulb only.
5. Replace the light bulb cover and lock in
place by turning the cover
counterclockwise.
Fire Hazard
Unplug dryer before changing
light bulb.
Replace light bulb cover before
operating dryer.
Failure to do so can result In death,
fire, or electrical shock.
6. Reconnect power supply.
13

Removing accumulated lint
Lint can gather inside the dryer and be a fuel
for fire. Lint should be removed every two to
three years, or more often, depending on
dryer usage. Cleaning should be done by a
qualified person. If you have any questions
or comments, please call our Consumer
Assistance Center at l-800-253-1 301.
Electrlcal Shock Hazard
Unplug dryer before removing dryer
panels.
Wear gloves when handling dryer
parts.
Make sure door switch wires are not
touching the dryer drum before
closing the top. See page 16, Step 7.
Failure to do so can result In death,
electrical shock, or serious cuts.
For all electric dryers, or gas dryers
which have a lower front access panel
NOTE: See page 15 if your dryer is gas and
has a full front panel.
1. Unplug the power supply cord or turn off
the electrical power.
2. Remove back panel (electric) or lower
front access panel (gas). See the Installa-
tion Instructions.
3. Remove lint from shaded area in illustra-
tion with a soft brush or vacuum cleaner.
Avoid damaging wires, thermostats
(electric), funnel (gas), or ignitor (gas).
4. Replace panel.
5. Reconnect and level dryer again, if
necessary.
Thermostats Heater Heat element
A box terminals
Electric dryer with back panel removed
Igni\or/I
Funnel
Gas dryer with lower front
access panel removed
14

Electrlcal Shock Hazard
Unplug dryer before removing
dryer panels.
Wear gloves when handling
dryer parts.
Make sure door switch wires are not
touching the dryer drum before
closing the top.
Failure to do so can result in death,
electrlcal shock, or serious cuts.
If your dryer is gas and has a full front
panel, remove front panel as follows:
1. Unplug the power supply cord or turn off
the electrical power.
2. Open lint screen lid. Remove two screws
from lint screen area.
3. Open top by pulling forward and up at
each front corner (see View A). Rest
raised top against wall behind dryer (top
is hinged at rear).
Remove screws
before opening top
84
View A
continued on next page
15

Electrical Shock Hazard
Unplug dryer before removing dryer panels.
Wear gloves when handling dryer parts.
Make sure door switch wires are not touching the dryer drum
before closing the top.
Failure to do so can result in death, electrical shock, or
serious cuts.
4. Remove two internal screws from front
panel flanges (near top front corners). Lift
front panel slightly, lifting off lower clips
(see lower clip inset of View B). Slowly
pull front panel forward, disengaging
panel from drum. (Drum will drop slightly.)
5. Move front panel aside and rest edge
against side of dryer. Avoid disconnecting
wire clips (see wire clips inset of View B)
or damaging wires.
6. Remove lint from area shown in “gas
dryer” illustration on page 14 with soft
brush or vacuum cleaner. Avoid damag-
ing wires, funnel, or ignitor.
7. Reassemble in reverse order. Before
closing the top, check the following:
-Drum seal must be flared out (see
drum seal insets of View B) and prop-
erly positioned against panel at back of
drum. Rotate drum counterclockwise
one full turn to check drum seal.
-Belt should be centered and tight on
dryer drum.
-Wire clips which hold the door switch
wires must be anchored in slot in top
of front panel (see wire clips inset of
View B) and along top edge of side
panel. Door wires must not touch drum
when dryer is operating.
8. Replace top panel and lint screen screws.
Top and front panels must be securely in
place before operating dryer.
9. Reconnect power and level dryer again,
if necessary.
View B
For more information, call our
Consumer Assistance Center
24 hours a day.
1-800-253-1301
16

Laundry Tips
This section provides information on preparing clothes for drying, drying guidelines, and
instructions for drying special-care items.
NOTES:
l Refer to your Washer Use and Care Guide for proper washing techniques and additional
laundry tips.
l See pages 3 and 4 of this book for Important Safety Information.
Sorting clothes
l Separate dark from light colors; colorfast l Separate lint givers (towels, chenille) from
a
w
from non-colorfast. Items lint takers (corduroy, synthetics, perma-
properly sorted for washing are nent press). When possible, turn lint takers
usually properly sorted for inside out.
drying.
l Separate heavy fabrics (denim, towels)
from light fabrics (synthetics, permanent
press).
Choosing load sizes
l Mix large items with smaller items. Load
the dryer by the amount of
space items take up, not by
their weight. Do not overload
the dryer. Overcrowding
causes uneven drying and
l For better tumbling action, when drying
only a few small items, add one or two
lint-free towels. This also prevents small,
lightweight items from blocking airflow.
wrinkling, and can cause items to wear out
faster (because of pilling).
l You may need to rearrange large items
(sheets, blankets, tablecloths) during a
cycle to reduce balling or rolling up.
Drying tips
l Close zippers, snaps, and hooks to avoid
snagging other items Remove
heat-sensitive trim that can be
damaged by drying. Tie strings
and sashes so they will not
tangle.
l Check garments to make sure all spots
and stains were removed during the wash.
Do not tumble dry soiled or stained items.
Heat may permanently set stains.
l Sharp or metal objects can damage your
dryer. Check pockets for pins,
clips, money, bolts, nuts, etc.
Do not lay these objects on
your dryer after emptying
pockets. Turn pockets of
heavy items inside out for even drying.
l Place small items such as baby socks or
hankies in a mesh bag for easier removal.
l Articles to be ironed should be removed
from the dryer while still damp.
17

Using dryer fabric softeners
Dryer fabric softeners are recommended for
reducing static cling and for softening
fabrics. Always follow package instructions
carefully.
l Put one fabric softener sheet on top of the
load before starting the
dryer. Do not add a fabric
softener sheet after the drying
cycle has started. Instant heat
can cause the fabric softener
to spot fabrics.
l Remove fabric softener stains by wetting
the stains and rubbing them with liquid
detergent or bar soap and rewash.
l Some fabric softeners can clog the lint
screen and slow drying. Use fabric soften-
ers labeled as dryer safe.
Saving energy
l Use an Automatic cycle to dry most loads.
l Dry only full loads without overdrying.
l Avoid overloading dryer, adding wet items
to a partly dried load, or opening the door
unnecessarily.
l Plan your laundry to dry one load after
another. A warm dryer shortens drying
time.
l Shorten drying times by exhausting dryer
properly and cleaning exhaust duct and
outside exhaust hood as needed.
-Keep the lint screen clean.
-Use your dryer in a room where room air
temperature is above 45°F (7°C).
-Sort loads by fabric weight and type.
Vacation care
1. Unplug power supply cord or turn off
electrical power supply.
2. Clean lint screen.
18

Drying special-care items
Most garments and household textiles have manufacturer’s care labels with laundering
instructions. Always follow care label dlrections when they are available. Pages 9 and 10
include drying instructions for most types of washables. The chart below provides drying
instructions for special-care washables.
ITEMS DRYING INSTRUCTIONS
Blankets and Machine drying knitted woolens is not recommended. Block to shape
woolens when wet and allow to air dry. Line dry blankets in the shade on a
breezy day over two lines. Pin edges together and straighten them.
When partly dry, turn the blanket over, re-pin, and re-straighten.
When dry, brush nap.
l Cotton, rayon, Dry as recommended for permanent press fabrics on page 9.
synthetic blankets
l Electric blankets, If manufacturer recommends machine drying:
electric sheets, 1. Place one or two dry towels in the dryer and preheat 3-5
woolen blankets,
washable woolen minutes on a high setting. This will dry blankets faster and help
avoid pilling.
garments 2. Put blanket in dryer with warm towels. Set control for 20 minutes.
3. Check after 10 minutes. Remove when still damp. Overdrying and
long tumbling can cause shrinking and pilling.
4. Place blanket on flat surface, or over two lines to finish drying.
Gently stretch to original size and shape.
5. When completely dry, brush gently to raise nap. Press binding
with cool iron if needed.
Curtains,
slipcovers
l Draperies,
slipcovers
Remove drapery weights and hooks before laundering.
For slipcovers, replace while still slightly damp. They will dry to fit
tightly.
Dry only a few minutes.
1. Leave room in dryer for load to fluff.
2. Remove from dryer while slightly damp. Do not overdry.
Diapers, baby
clothes Wash and dry small items in a mesh bag or pillowcase for
convenient handling.
Remove diapers and cotton knit items while still slightly damp. They
will feel softer, shrink less, and be easier to fold.
Elastic Items
Flame-retardant
clothing
Remove from dryer while still slightly damp.
Some items have been treated with a flame-retardant finish to
improve their resistance to burning. Such items are clearly labeled.
To retain flame-retardant qualities through continuous use and
washing, clean and dry according to the manufacturer’s instructions.
continued on next page
19

ITEMS DRYING INSTRUCTIONS
Knits, washable Do not overdry knits. Overdrying can cause shrinking and static cling.
1. Select cycle according to fabric and construction.
2. Turn synthetics and blends inside out when drying to avoid pilling.
3. Remove cotton and rayon knits while still slightly damp. Stretch into
shape and lay flat to finish drying.
Napped items
l Corduroy,
velveteen
Quilted, down-
filled items
Dry separately or with similar colors to avoid lint transfer. Follow care
label instructions.
1. Remove from dryer while there is still a trace of moisture.
2. Smooth, reshape, and air dry before putting away.
Follow care label instructions.
1. Dry one at a time.
2. Remove from dryer and shake or fluff the item during the drying
cycle.
3. Smooth and reshape before putting away.
Snowsuits,
jackets Check label for fiber content, then follow care label instructions.
. Nylon or
polyester 1. Dry garment for about 10 minutes. Remove and turn inside out. Dry for 10 more minutes.
2. Remove from dryer immediately and hang on a non-rusting hanger
to finish drying. This will help eliminate wrinkles.
Tinted, dyed, or Dry according to fabric, weight, and care label instructions. Wipe the
noncolorfast dryer drum carefully to remove any dye or lint that can be transferred
items to other loads. See “Cleaning the dryer interior” on page 13.
20