Whirlpool AKZ 162/WH User manual

3
INSTRUCTIONS FOR USE
SAFEGUARDING THE ENVIRONMENT
IMPORTANT NOTES
BEFORE USING THE OVEN
INSTALLATION
OVEN ACCESSORIES
BOTTOM OVEN FUNCTIONS
TOP OVEN FUNCTIONS
CARE AND MAINTENANCE
TROUBLESHOOTING GUIDE
AFTER SALES SERVICE
To make the most of your new oven, read the user's instructions carefully and keep them on hand
for consultation in the future.
31002015GB.fm Page 3 Friday, November 21, 2008 5:39 AM

4
SAFEGUARDING THE ENVIRONMENT
Disposal of packaging materials
•The packaging material is 100% recyclable and is
marked with the recycle symbol .
•Packing materials should therefore not be
thrown away with household rubbish but
disposed of as directed by local authorities.
Disposal of old appliances
ThisapplianceismarkedaccordingtotheEuropean
directive 2002/96/EC on Waste Electrical and
Electronic Equipment (WEEE).
Byensuring thisproduct isdisposedof correctly,you will
helpprevent potentialnegativeconsequences forthe
environmentand humanhealth, whichcould otherwise
becausedbyinappropriatewastehandlingofthisproduct.
The symbol on the product, or on the
documents accompanying the product, indicates
thatthis appliancemay notbe treatedas household
waste. Instead it shall be handed over to the
applicable collection point for the recycling of
electrical and electronic equipment.
Disposal must be carried out in accordance with
local environmental regulations for waste disposal.
For more detailed information about treatment,
recoveryandrecycling ofthis product,please contact
your local city office, your household waste disposal
serviceortheshopwhereyoupurchasedtheproduct.
Energy saving
•Only pre-heat the ovens if specified in the
cooking table of the Product Description Sheet
or in your recipe.
•Usedark, blackenamelled bakingmouldsasthey
absorb heat very well.
IMPORTANT NOTES
Warning:
• Accessible parts will become hot when in
use. To avoid burns and scalds children
should be kept away.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities or
lack of experience and knowledge unless
they have been given initial supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
• Make sure young children are not allowed
to play with the appliance.
• Never use abrasive materials or substances
to clean the GLASS, to prevent damaging it.
• The unit gets very hot during use. Do not
touch the heating elements in the oven.
•This oven is designed solely for use as a household
appliance for cooking food. Any other use is
prohibited. The manufacturer declines all liability
for damage caused by improper or incorrect use.
•Any repairs or servicing must be carried out
exclusively by a qualified technician.
•Never expose the oven to atmospheric agents.
•Do not put heavy objects on the doors because
they could damage the oven cavities and hinges.
Do not cling to the doors.
•Never hang anything heavy on the oven door
handles.
• Do not cover the bottom of the ovens with
aluminium foil or other objects.
•The oven doors must close properly. The door
seals must be kept clean.
•Do not pour water directly into the inside of a
hotoven. Thiscould damagetheenamel coating.
•Fruit juice drippings from the baking tray may
leave permanent stains. We recommend the
ovens be cleaned before being used again.
•Never drag pots and pans across the bottom of
the ovens as this could scratch the coating.
•Residual condensation from cooking could
damage the ovens and surrounding kitchen units
over time. We recommend that you:
- set the lowest temperature;
- cover food;
- do not store food in the oven;
- dry any wet parts when the oven is cool.
•Thefront paneland thehandleof theoven doors
heat up when the appliance is switched on for a
long time at high temperatures.
•Never touch the oven with any wet part of the
body and do not operate it with bare feet.
•Donotpulltheapplianceorthepowersupplycable
to disconnect them from the electrical supply.
31002015GB.fm Page 4 Friday, November 21, 2008 5:39 AM

5
• Keep children away from the following
elements as they are sources of danger:
- Theovenand itscontrols,especiallywhen in
operationandimmediatelyafterwardstoavoidinjury.
- Packaging (bags, polystyrene, metal parts, etc.).
- An oven to be scrapped.
•Make sure that the electrical cables of other
appliances used near the oven do not touch hot
parts and are not trapped in the oven doors.
•Some oven models are equipped with an air
cooling system to prevent the front of the oven
andcabinet cavityfrom reachingexcessivelyhigh
temperatures.
Attention: Steam and smoke are vented through
two openings located between the control panel
andthetopoven doorandbetweenthe twodoors.
Do not obstruct the vent openings.
•Do not place inflammable material in the ovens
or nearby: a fire may break out if the appliance is
inadvertently switched on.
•Useovenglovestoremovepansandaccessories,
when the ovens are hot.
• During cooking steam will form in the oven
cavity. Please take special care when
opening the door.
•Ifalcoholicbeveragesareaddedwhenroastingor
cooking cakes and sweets (for example, rum,
cognac, wine, etc.) bear in mind that alcohol
evaporates at high temperatures. Vapours
released by the alcohol can catch fire upon
coming into contact with the electric heating
element.
•Do not heat sealed containers in the ovens
(exceptforpackagesspecifically designedforthis
purpose; see the manufacturer's instructions).
The pressure that develops inside the packaging
might cause it to explode, damaging the
appliance.
•Donotusecontainersmade ofsyntheticmaterial
for cooking (except for packages specifically
designedforthispurpose;seethemanufacturer's
instructions). They could melt at high
temperatures.
•Keep an eye on the oven if you are using a lot of
fat or oil. Oil and fat can overheat and catch fire!
•Never pull out fully loaded shelves. Use extreme
caution.
BEFORE USING THE OVEN
•Removethe accessoriesfromthe ovensandheat
them 200°C for about an hour to eliminate the
smell of the protective grease and insulating
materials.Keepthe kitchenwindow openduring
this operation.
•Before using the oven, remove:
- Stickers on the front and oven doors, except
for the rating plate;
- protective cardboard and protective plastic
film from the front panel controls and other
parts of the appliance;
- any sticky labels from the accessories
(for example, under the drip tray).
31002015GB.fm Page 5 Friday, November 21, 2008 5:39 AM

6
INSTALLATION
Technical information for the installer
After removing the oven from its packaging, before making the
connections place it on the polystyrene foam base to protect it
from damage.
Oveninstallationrequirestwopeople. Donot attempttoliftthe
ovenbythedoorhandle.Liftbymeansofthehandlesontheside
of the oven.
Check that the appliance has not been damaged in transit.
Oven dimensions and kitchen unit dimensions are shown in the
figure opposite.
Any adjacent kitchen units must be heat resistant (80° C min).
If plastic laminates or cement are not sufficiently heat-resistant,
warping, bubbling or detachment of the finish may result.
Install the oven in the housing, lifting it by the sides, taking care
not to trap the wires of the power supply cable.
For correct ventilation, observe the ventilation opening
directions shown in the figure (500 min x 80 mm and 500
min x 50 mm inside the cabinet).
Secure the oven to the kitchen unit with screws (A) as shown.
During oven installation, care must be taken to ensure that the
sides do not touch the front edges of the housing or adjacent
drawers and doors (see picture).
• Important: do not connect to the power supply until
you have finished connecting the oven and cooktop.
• Make sure the appliance is installed and connected to
the power supply by a qualified technician in
accordance with the manufacturer’s instructions and
in compliance with local regulations.
• The installer is responsible for the correct electrical
connection of the appliances and the observance of
the relative safety recommendations.
• The appliance must be connected to the power supply
by means of an all-pole disconnect switch with
minimum contact gap of 3 mm.
• The law requires that the appliance be earthed.
• Do not use multiple plug adapters or extension leads.
• After the oven has been installed, the electrical
components must be concealed.
Make sure that the voltage shown on the rating plate is
the same as the domestic power supply voltage.
The rating plate is on the front edge of the oven cavity
(visible with oven door open).
For Australia only:
The oven is delivered without supply cord. Use a supply cord
type H05 RR-F, 3X2,5 mm2min.
Fumes
vent
Earth
31002015GB.fm Page 6 Friday, November 21, 2008 5:39 AM

7
OVEN ACCESSORIES
Accessories supplied depend on the model. The
accessories provided with the oven are listed in the
Product Description Sheet provided separately (under
Accessories).
Drip tray (1)
Thedrip trayis designedto collectfat andfoodparticles whenit
is positioned under the grid or as a plate, such as when cooking
meat, chicken and fish with or without vegetables. Pour a little
water into the drip tray to prevent spatters of fat and smoke.
Baking tray (2)
For cooking biscuits, cakes and pizzas.
Grid (3)
The grid can be used to grill food or as a support for baking trays,
cake tins and other cooking receptacles. It can be placed on any
of the runners in the ovens. The grid can be inserted with its
curved side facing upwards or downwards.
Grid (3a) for Australia only
The grid rear tray guard must be positioned up-right and to the
rear of the oven. Follow the arrow indication when inserting in
the oven.
Side catalytic panels (4)
The catalytic panels have a special microporous enamel coating
thatabsorbs fatspatters. Werecommendan automatic cleaning
cycle after cooking particularly fatty food (see “Care and
Maintenance”).
Meat tray (5)
Position the meat tray above the drip tray with the opening
positioned towards the door.
Pour some water on the drip tray which can be used from time
to time to pour on the meat.
Kit “Grill Pan Set” (6)
The pan set comprises a grid (6a), an enamel drip tray (6b).
If your pan set is not equipped with a handle (6c) it can be
purchased via Service.
This set must be placed on the grid (3) and used with the Grill
function.
1
3
4
6
2
6a
6b
6c
5
3a
31002015GB.fm Page 7 Friday, November 21, 2008 5:39 AM

8
BOTTOM OVEN FUNCTIONS
The functions actually available depend on the
model (see the Product Description Sheet
supplied separately).
MLTF (Heat Maintenance)
This function maintains a uniform temperature
inside the oven.
The default setting is 35°C.
Forthisfunctionitisadvisabletousethelowershelf
level.
35°C: to allow dough for bread and pizza to rise.
60°C: to keep food warm once it is cooked.
It is advisable to use the lower shelf.
STATIC
To cook meat, fish and poultry in the oven.
The function allows temperature control; the
temperature can be set in the range of 50°C to
250°C. The default setting is 200°C.
Preheat the oven to the required cooking
temperatureand placethefood insideas soonasall
the indicators of the thermometer
are alight and an acoustic signal sounds.
It is advisable to use the second or third shelf from
the bottom.
PASTRY/FAN
To cook on max. two shelves.
The function allows temperature control; the
temperaturecanbesetintherangeof50°Cto250°C.
The default setting is 175°C.
Ifnecessary,switch theposition ofthe dishes inthe
oven during cooking for optimum cooking
performance.
GRILL
Usethe grillfunction tocooksirloinsteaks,kebabs,
sausages, vegetables au gratin and for making toast.
This function allows 4 slight adjustments which
progressivelyincreaseheatoutput(position1, 2,3,
4) plus a maximum heat setting (position 5).
The default position is (3).
Preheat the oven for 5 min.
During cooking the door must remain closed.
Arrange food on the wire shelf. When cooking
meat, to avoid spatters of fat and smoke, pour a
little water into the drip tray.
It is advisable to turn the food during cooking.
TURBOGRILL
This function is ideal for cooking large pieces of
meat (roast beef, roast joints).
Thefunctionallowsvarioussettings(1 min.-5max.).
Preheat the oven for 3/5 min.
During cooking the door must remain closed.
When cooking meat, to avoid spatters of fat and
smoke, pour a little water into the drip tray.
It is advisable to turn the food during cooking.
FAN/THERMO-VENTILATED
To cook (without preheating) foods that require
the same cooking temperature on one or more
shelves (e.g.: fish, vegetables, sweets), without
transferring odours from one foodstuff to the
other.
This function allows temperature control; the
temperature can be set in the range 50°C to 250°C.
The default setting is 160°C.
TURBOFAN
To cook on one shelf (e.g.: fruit, cakes, timbales,
vegetables, pizza, poultry).
This function allows temperature control; the
temperature can be set in the range 50°C to
250°C.
The default setting is 160°C.
PIZZA/BREAD
To bake pizza, bread, focaccia.
Thefunctionprovides2cookingprograms(P1, P2)
with preset initial temperatures that can be
adjusted with 5°C steps by the user.
The default setting is P1.
You will find a recipe for each programme in the
recipe book provided.
To save energy, when the oven is already warm, it
will automatically reach the set cooking
temperature without preheating.
BOOSTER
To preheat the oven rapidly.
Theboosterfunction cutsoutautomatically whenthe
programmed temperature is reached. The acoustic
signal will sound and the appliance switches to the
STATIC cooking function.
This function allows temperature control; the
temperature can be set in the range 50°C to 250°C.
The default setting is 200°C.
Programme Preheating
(adjustable) Cooking (not adjustable)
P1 max 300 240
min 250 190
P2 max 220 200
min 200 180
31002015GB.fm Page 8 Friday, November 21, 2008 5:39 AM

9
TOP OVEN FUNCTIONS
Thefunctionsactually available depend on the
model (see the Product Description Sheet
supplied separately).
STATIC
Use when all the food is on the same shelf.
Preheat the oven to the required cooking
temperature and place the food inside as soon as
thermostat indicator light switches off.
Ideally,theshelfshouldbe onthe secondshelffrom
the bottom when using the static function.
BOTTOM HEATING ELEMENT
To finish cooking fruit or cheese cakes or to thicken
sauce.
Usethisfunction forthe last10/15minutesofcooking
time.
GRILL
These functions are ideal for grilling meat (bacon,
sausages, steak) and for toasting bread.
Before use, preheat the grill for 5 minutes approx.
Pour some water into the drip tray to reduce
smoke and grease spatters and position it into the
oven.
Place food on the meat tray or grid.
Turn the meat over about half-way through
cooking time.
During cooking leave the oven door open.
SINGLE VARIABLE GRILL
The power can be set according to the positions
available.
Use this function to grill small pieces of meat
(steaks, sausages) and for making toasts.
DUAL VARIABLE GRILL
The power can be set according to the positions
available.
Usethis functionto grilllargequantities offood and
toast.
31002015GB.fm Page 9 Friday, November 21, 2008 5:39 AM

10
CARE AND MAINTENANCE
Important:Donotuse waterpressure cleanersor
steam cleaners.
When you finish cooking; wait for the oven to
cool and then clean it to prevent the build-up
of baked-on residues.
Exterior of the oven
•Clean with a damp cloth. If it is very dirty, add a
few drops of washing up detergent to the water.
Wipe with a dry cloth.
•Do not use corrosive or abrasive detergents,
which dull the surface.
In the event one of these products comes into
contactwiththe oven,immediately cleanit using
a damp cloth.
•Slight differences in colour on the front of the
appliance are determined by the different
materials used, such as glass, plastic and metal.
Ovens with aluminium front panel
•Clean using a mild detergent and a soft window
cleaningclothor amicrofibre cloththat does not
leave fibres on the surface. Wipe horizontally,
without exerting pressure.
•Do not use corrosive products, hard sponges or
rough cloths. Clean the aluminium surfaces with
a dry cloth.
Accessories
•Soak the accessories in water with washing up
detergent immediately after use. Food residues
can be easily removed using a brush or sponge.
Oven cavity
•Do not use abrasive cleaners or pan scourers.
Use special oven cleaners and follow the
manufacturer's instructions.
•After every use, wait for the oven to cool then
cleanitto preventthe build-upof baked-on food
residues.
•With long cooking times or when cooking on
severalshelves,especially foodwith a highwater
content (pizzas, stuffed vegetables, etc.)
condensationmay formon theinside ofthe door
and the seal. When the oven is cool, dry the
inside of the door with a cloth or sponge.
•Clean the glass of the door with a suitable liquid
detergent.
•The oven door may be removed to facilitate
cleaning.Toclean theupper partof the oventhe
grill heating element can be lowered (only on
some models).
Self-cleaning catalytic side panels and rear
cavity (if provided) - Cleaning cycle
•Heat the oven to 200° C when empty and
maintain this temperature for about an hour.
•At the end of the cycle and when the oven has
cooled, use a damp sponge to remove any food
residues.
• Never clean the self-cleaning catalytic
panels and rear cavity with abrasive
products, rough brushes, pan scourers, or
oven cleaner sprays, as they will lose their
automatic cleaning properties.
31002015GB.fm Page 10 Friday, November 21, 2008 5:39 AM

11
Attention: When carrying out the following operations it
is advisable to wear protective gloves. These instructions
should be followed carefully both to prevent injury and in
order to avoid damaging the oven door or hinges.
How to remove the oven door:
1. Open the oven door fully (see fig. 1).
2. Lift the two catches and push them forwards as far as they
go (see fig. 2).
3. Remove the door by closing it partially and lifting it upwards
(see fig. 3).
To refit the door:
1. Insert the hinges into their grooves and lower the door fully.
2. Lower the two catches.
3. Close the oven door fully.
Attention:Theseinstructionsshouldbefollowedcarefullyboth
to prevent injury and in order to avoid damaging the oven door
or hinges.
Loweringthe top ovengrill elementto cleanthe ovenroof
Lowering the bottom oven grill element to clean the oven
roof (depending on the model)
•Do not attempt to clean the oven until it is cool.
1. To clean the oven roof, pull out the grill element and lower
it as far as it will go.
2. Clean the oven roof and then return the grill element to its
original position.
HOW TO REPLACE THE OVEN LAMP
1. Switch off electricity at the mains.
2. Unscrew the lamp cover.
3. Replace the bulb.
4. Refit the lamp cover.
5. Switch on the power again at the mains.
Note:
Use only a replacement bulb of 25 Watts 230 V, Type E-14,
T300°C, available from our After Sales Service.
Important: Do not use the oven until the lamp cover has
been repositioned.
31002015GB.fm Page 11 Friday, November 21, 2008 5:39 AM

12
TROUBLESHOOTING GUIDE
Oven not working:
•Check there is mains power and that the oven is
connected to the power supply.
•Switchtheovenoff andthenback onagainto see
if the fault persists.
IMPORTANT:
•Check that the oven control knob is not turned
to “0” or to the “lamp” symbol .
- If the electronic programmer (depending on
model) display presents the message
“ ”,pressthebutton2 toresettheoven
and then set the clock (see the Programmer
Description Sheet supplied separately).
- If the electronic programmer (depending on
the model) presents the message “F XX”,
contact the nearest After Sales Service.
Specify in this case the number that follows
the letter “F”.
- Check that the mechanical programmer
(if provided) is turned to “manual”.
AFTER SALES SERVICE
Before contacting After Sales Service:
1. Trytosolve theproblem yourselffollowing the
points described in “Troubleshooting Guide”.
2. Switch the appliance off and then back on again
to see if the fault persists.
If after the above checks the oven or cooktop
are still not working properly, contact the
nearest After Sales Service.
Please give:
•A short description of the fault;
•the oven type and model;
•the service number (number after the word
Service on the rating plate), located on the
right hand edge of the oven cavity (visible
when the oven door is open). The service
number is also indicated on the guarantee
booklet;
•your full address;
•your phone number.
In the event the oven must be repaired, contact an
authorised After Sales Service, (use of original
replacement parts and proper repair is guaranteed).
Failure to comply with these instructions may
compromise the safety and quality of the
product.
DECLARATION OF CONFORMITY
• This oven is suitable for contact with
foodstuffs and complies with EEC (CE)
Regulation n. 1935/2004.
• This appliance is designed to be used for
cooking only.
Any other use (for example, for room
heating) is considered as improper use and
potentially dangerous.
• The appliance was designed, manufactured
and sold in compliance with:
- safety objectives of the “Low Voltage”
Directive 2006/95/CE (which replaces
73/23/CEE and subsequent
amendments);
- the protection requirements of EMC
Directive 89/336/EEC
- the requirements of Directive 93/68/EEC.
31002015GB.fm Page 12 Friday, November 21, 2008 5:39 AM