Whirlpool 3VET21DK User manual

T&f1 01
4a
HOmeAppliances
UseAndCare
A Note To You
Important Safety
Instructions
Parts And Features
u-
Before Using Your
- _
(r( Refrigerator
Using Your
Refrigerator
Caring For Your
Refrigerator
2
3
4
5
7
15
Food Storage Guide 18
Or Service
NO-FROST REFRIGERATOR-FREEZER
MODELS 3VET21 DK 3VETlSDK

A Note To You
Thank you for buying a Whirlpool* appliance.
You have purchased a quality, world-class home appliance. Years of engineering experience
went into its manufacturing. To ensure that you enjoy many years of trouble-free operation,
we developed this Use and Care Guide. It is full of valuable information on how to operate
and maintain your appliance properly and safely. Please read it carefully. Also, please com-
plete and mail the Ownership Registration Card provided with your appliance. This will help
us notify you about any new information on your appliance.
Your safety is important to us.
This guide contains safety symbols and statements. Please pay special attention to these
symbols and follow any instructions given. Here is a brief explanation of the use of each
symbol.
This symbol will help alert you to such
dangers as personal injury, burns, fire
and electrical shock.
This symbol will help you avoid actions
which could cause product damage
(scratches, dents, etc.) and damage to
your personal property.
Help when you need it.
If you ever have a question concerning your appliance’s operation, or if you need service, first
see “If You Need Assistance Or Service” on page 20. If you need further help, feel free to call
an authorized Whirlpool service company. When calling, you will need to know your
appliance’s complete model number and serial number. You can find this information on the
model and serial number label (see diagram on page 4). For your convenience, we have
included a handy place below for you to record these numbers, the purchase date from the
sales slip and your dealer’s name and telephone number. Keep this book and the sales slip
together in a safe place for future reference.
Model Number
Serial Number
Purchase Date
Dealer Name
Dealer Phone
2

Important Safety Instructions
To reduce the risk of fire, electrical shock, or injury when
using your refrigerator, follow these basic precautions:
1
l Read all instructions before using the l Never allow children to operate, play with,
refrigerator. or crawl inside the refrigerator.
l Child entrapment and suffocation are l Never clean refrigerator parts with
not problems of the past. Junked or flammable fluids. The fumes can create a
abandoned refrigerators are still danger- fire hazard or explosion.
ous ... even if they will “just sit in the . FOR YOUR SAFETY l
garage a few days.”
If you are getting rid of your old refrig-
erator, do it safely. Please read the
enclosed safety booklet from the Asso-
ciation of Home Appliance Manufactur-
ers. Help prevent accidents.
DO NOT STORE OR USE GASOLINE OR
OTHER FLAMMABLE VAPORS AND
LIQUIDS IN THE VICINITY OF THIS OR
ANY OTHER APPLIANCE. THE FUMES
CAN CREATE A FIRE HAZARD OR
EXPLOSION.
I
- SAVE THESE INSTRUCTIONS -
Help us help you
Please:
l Install and level the refrigerator on a floor
that will hold the weight and in an area
suitable for its size and use.
l Do not install the refrigerator near an oven,
radiator or other heat source.
l Do not use the refrigerator in an area
where the room temperature will fall below
13°C (55°F).
l Keep the refrigerator out of the weather.
l Connect the refrigerator only to the proper
kind of outlet, with the correct electrical
supply and grounding.
l Do not load the refrigerator with food
before it has time to get properly cold.
l Use the refrigerator only for the uses
described in this manual.
l Properly maintain the refrigerator.
. Be sure the refrigerator is not used by
anyone unable to operate it properly.
3

Parts And Features
This section contains captioned illustrations of your appliance. Use them to become familiar
with where all parts and features are located and what they look like. The model you pur-
chased may have all or some of the parts and features shown and they may not match the
illustration exactly. This manual covers several models.
Ice cube trays Freezer
and shelf+ light+ Removable
shelf+
Ice bin,
Freezer shelf -
Control panel +
Model and serial
number label -
(inside wall)
Meat drawer \
Adjustable
shelves --
(Spillguard’
shelves on
some models)
Crisper cover -
Humidity-
controlled
crispers H
Leveling rollers
(behind base gr
+On some models
sille)
Model 3VET21 DK shown
Control panel
REFRIGERATOR EXTERIOR MOISTURE CONTROL FREEZER
COLDER.
Refrigerator
control Exterior moisture
control Light
switch Freezer control

Before Using Your
Refrigerator
In This Section
Page Page
Cleaning it ...........................................5 Installing it properly ...........................6
Plugging it in .......................................5 Leveling it ............................................6
It is important to prepare your refrigerator for use. This section tells you how to clean it,
connect it to a power source, install it and level it.
Cleaning it
Removing packaging materials
NOTE: Do not remove any permanent
Remove tape and any inside labels (except instruction labels inside your refrigerator. Do
the model and serial number label) before not remove the Tech Sheet fastened under
using the refrigerator. the refrigerator at the front.
To remove any remaining glue:
Cleaning it before use
l Rub briskly with your thumb to make a ball, After removing all packaging materials,
then remove. clean your refrigerator before using it, if
OR necessary. See cleaning instructions on
l Soak area with liquid hand-dishwashing pages 15 and 16.
detergent before removing glue as de-
scribed above. Do not use sharp instru-
ments, rubbing alcohol, flammable fluids or
abrasive cleaners. These can damage the
material. See “Important Safety Instruc-
tions” on page 3.
Plugging it in
Recommended Grounding Method
A 220 or 240 Volt, 50 Hz., AC only 15 or 20
ampere fused and properly grounded
electrical supply is required. It is recom-
mended that a separate circuit serving only
this appliance be provided. Use a receptacle
which cannot be turned off with a switch or
pull chain. Do not use an extension cord.
5

Installing it properly
1. Allow 1.25 cm (I/Zinch) space on each
side and at the top of the refrigerator for
ease of installation.
2. If the hinge side of the refrigerator is to be
against a wall, you might want to leave
extra space so the door can be opened
wider.
3. The refrigerator can be flush against the
back wall.
Leveling it
Your refrigerator has 2 front leveling
screws-one on the right and one on the left.
To adjust one or both of these, follow the
directions below.
1. Remove base grille. (See page 13.)
2. To raise front, turn screw clockwise.
3. To lower front, turn screw counterclock-
Right to raise;
left to lower
screwdriver
wise.
4. Check with level.
5. Replace base grille. (See page 13.)
6

Using Your Refrigerator
In This Section
Page
Setting the controls ............................7
Changing the control settings ...........8
Adjusting the door bins .....................9
Adjusting the bin/shelf glides ...........9
Adjusting the refrigerator shelves .. 10
Using the egg bin ............................. 10
Removing the meat drawer
and cover ........................................... 11
Removing the crispers and
crisper cover ..................................... 11
Adjusting the crisper
humidity control ...............................12
Page
Removing the freezer shelf .............. 12
Raising the ice compartment door .. 12
Using the ice cube trays ..................12
Changing the light bulbs ................. 13
Removing the base grille ................. 13
Reversing the door swing ................ 14
Understanding the sounds
you may hear ....................................14
Saving energy ...................................14
To obtain the best possible results from your refrigerator, it is important that you operate it
properly. This section tells you how to set the controls, remove and adjust some of the
features in your refrigerator, and how to save energy.
Setting the controls
Temperature controls
Controls for the refrigerator and freezer are in
the refrigerator. When you plug in the refriger-
ator for the first time:
1. Set the Refrigerator Control to 4.
Refrigerator Control adjustments range from
1 (warmest) to 8 (coldest).
2. Set the Freezer Control to C.
Freezer Control adjustments range from
A (coldest) to D (warmest).
3. G.ive the refrigerator time to cool down completely
before adding food. This may take several hours.
The settings indicated above should be correct
for normal, household refrigerator usage. The
controls are set correctly when milk or juice is as
cold as you like and when ice cream is firm. If you
need to adjust these settings, see “Changing the
control settings” on page 8.
I FREEZER I
7

Exterior moisture control
The Exterior Moisture Control operates
electric heaters around the door openings.
These heaters help keep moisture from
forming on the outside of the refrigerator
cabinet.
l Use the OFF setting when humidity is low.
l Use the ON setting if moisture forms on
the outside of the refrigerator cabinet.
EXTERIORMOISTURECONTROL
OFF ON
Changing the control settings
If you need to adjust temperatures in l Adjust the Refrigerator Control first.
refrigerator or freezer, use the settings listed l Wait at least 24 hours between adjust-
in the chart below as a guide. ments.
l Then adjust the Freezer Control if needed.
CONDITION:
Refrigerator
section
too warm
REASON:
l Door opened often
l Large amount of food added
l Room temperature too warm
RECOMMENDED
CONTROL SETTINGS:
Refrigerator 4
Freezer A
Freezer
section
too warm
l Door opened often
l Large amount of food added
l Very cold room temperature
(can’t cycle often enough)
Refrigerator 3
Freezer C
Refrigerator
section
too cold
l Controls not set correctly Refrigerator 2
for your conditions Freezer B
Ice not
made fast
enough
Both
sections
too warm
l Heavy ice usage
l Very cold room temperature
(can’t cycle often enough)
l Door opened often
l Large amount of food added
l Very warm or very cold room
temperatures
Refrigerator 3
Freezer C
Refrigerator 4
Freezer B
8

Adjusting the door bins
To remove door bins:
1. Lift bin up.
Support button
2. Pull bin straight out.
To replace door bins:
1. Slide bin in above desired support button.
2. Push down until it stops.
Adjusting the bin/shelf glides
Use the bin/shelf glides to secure odd-
shaped items or to separate other items.
1. Grasp glide.
2. Slide glide along bin/track.
NOTE: Shelf glides cannot be removed.
9

Adjusting the refrigerator shelves
Adjust the shelves to match the way you use
your refrigerator. Glass shelves are strong
enough to hold bottles, milk and other heavy
food items.
To remove glass shelves:
1. Remove items from shelf.
2. Tilt shelf up at front.
3. Lift back of shelf.
4. Pull shelf straight out.
To replace glass shelves:
1. Guide the rear shelf hooks into the slots
in the shelf supports on cabinet wall.
2. Tilt shelf up at front until hooks drop into
slots. Lower front of shelf to level position.
Glass shelves are
heavy. Be careful.
Using the egg bin
The egg bin has three pieces - the lid, the egg
carrier, and the bin. Use the egg bin to hold
one, two or three dozen eggs.
To hold one dozen eggs:
Place a dozen eggs into the egg carrier. Then
place the egg carrier into the bin and cover
with the lid.
To hold two dozen eggs:
Place two dozen eggs loose in the bin and
cover them with the lid. Use the carrier to
transport eggs between the bin and your
cooking area.
To hold three dozen eggs:
Place two dozen eggs loose in the bin. Invert
the lid and place it on the bin. Place a dozen
eggs, in the carton, on top of the lid. Use the
carrier to transport eggs between the bin and
your cooking area.
IO