Whirlpool 7S21FNI SL Instruction sheet

Side by Side
1. How to Install the handle door properly?
The Handles for model 7S21FNI and
7S21FNN usually are not installed during
shipping. So customers are advised to install
the handles by themselves or as a
technician for service schedule.
There will be 4 screws and 2 handles
included with the unit

Side by Side
2. Make sure the screws are not flat on the surface of the door
There should be 1-2mm of
space between surface of the
door and the screw
If there is no space, the hole of
the handle door will not hoo
properly. And the handle would
easily come out

3. Slot in the door handle on the screws and pull down in a forceful
manner. This will lock the hook and the screw properly
Side by Side

. There is also an instruction guide on how to install the handle door in the
manual, inside the refrigerator. Refer to page 1 of the manual.
Side by Side