Whirlpool 8EDZOZK User manual

A
NO-FROST REFRIGERATOR-FREEZER 8EDZOZK
0
-4
0

A Note To You 2
PartsAnd Features 4
Before Using Your
Refrigerator 5
Using Your
Refrigerator 7
Caring For Your
, Refrigerator 17
Food Storage Guide 19
If You Need
EE=or 22
Warranty 24
1-800-253-1301
Call us with questions or comments
horn anywhere in the U.S.A

A Note To You
Thank you for buying a Whirlpool appliance.
You have purchased a quality, worldclass home appliance. Years of engineering experience have gone
into its manufacturing. To ensure that you will enjoy many years of trouble-free operation, we have
developed this Use and Care Guide. lt is full of valuable information on how to operate and maintain
your appliance properly and safely. Please read it carefully. Also, please complete and mail the Owner-
ship Registration Card provided with your appliance. This will help us notify you about any new informa-
tion on your appliance.
Your safety is important to us.
This guide contains safety symbols and statements. Please pay special attention to these symbols and
follow any instructions given. Here is a brief explanation of the use of each symbol.
This symbol will help alert you to such dangers as
personal injury, burns, fire and electrical shock. This symbol will help you avoid actions which
could cause product damage (scratches, dents,
etc.) and damage to your personal property.
Our Consumer Assistance Center number, l-800-253-1301,
is TOLL-FREE, 24 hours a day.
If you ever have a question concerning your appliance’s operation, or ff you need service, first see “If
You Need Assistance Or Service” on page 22. If you need further help, feel free to call our Consumer
Assistance Center. When calling, you will need to know your appliance’s complete model number and
serial number. You can find this information on the model and serial number label (see diagram on page
4). For your convenience, we have included a handy place below for you to record these numbers, the
purchase date from the sales slip and your dealer’s name and telephone number. Keep this book and
the sales slip together in a safe place for future reference.
Model Number
Serial Number
Purchase Date
Dealer Name
Dealer Phone

lmnortant Safetv Instructions
I I -
To reduce the risk of fire, electrical shock, or injury when using your
refrigerator, follow these basic precautions:
l Read all instructions before using the
refrigerator.
l Child entrapment and suffocation are not
problems of the past. Junked or abandoned
refrigerators are still dangerous ... even if
they will “just sit in the garage a few days.”
ff you are getting rid of your old refrigerator,
do it safely. Please read the enclosed safety
bookfet from the Association of Home
Appliance Manufacturers. Help prevent
accidents.
l Never allow children to operate, play with, or
crawl inside the refrigerator.
l Never clean refrigerator parts with flammable
fluids. The fumes can create a fire hazard or
explosion.
l FOR YOUR SAFETY l
DO NOT STORE OR USE GASOLINE OR
OTHER FLAMMABLE VAPORS AND LIQUIDS
IN THE VICINITY OF THIS OR ANY OTHER
APPLIANCE. THE FUMES CAN CREATE A
FIRE HAZARD OR EXPLOSION.
-SAVE THESE INSTRUCTIONS -
Help us help you
Please:
l Install and level the refrigerator on a floor that
will hold the weight and in an area suitable for
its size and use.
l Do not install the refrigerator near an oven,
radiator or other heat source.
l Do not use the refrigerator in an area where the
room temperature will fall below 55°F (13°C).
l Keep the refrigerator out of the weather.
l Connect the refrigerator only to the proper kind
of outlet, with the correct electrical supply and
grounding. (Refer to the Electrical Require-
ments and Grounding Instructions Sheet.)
-
l Do not load the refrigerator with food before it
has time to get properly cold.
l Use the refrigerator only for the uses described
in this manual.
l Properly maintain the refrigerator.
l Be sure the refrigerator is not used by anyone
unable to operate it properly.
Also, remove tape and any inside labels (except
the model and serial number label) before using
the refrigerator.
To remove any remaining glue:
l Rub briskly with thumb to make a ball, then
remove.
OR
l Soak area with liquid hand dishwashing
detergent before removing glue as described
above. Do not use sharp instruments, rubbing
alcohol, flammable fluids or abrasive cleaners.
These can damage the material. See “Impor-
tant Safety Instructions” above.
NOTE: Do not remove any permanent instruction
labels inside your refrigerator. Do not remove the
Tech Sheet fastened under the refrigerator at the
front.
3

This section contains captioned illustrations of your appliance. Use them to become familiar with where
all parts and features are located and what they look like. The model you have purchased may have all
or some of the parts and features shown and they may not match the illustration exactly. This manual is
designed to cover several models.
Automatic ice Control panel Light
Model EMOZK shown
Control panel
II -:qyqq
Freezer control Refrigerator control

Before Using Your
Refrigerator
In This Section Paw Page
Ckumlng It ...........- ..................- .._-.......... . .....5 Installing lt “...............I..............-.”..............“. 5
plugging lt in .- ... ............. ..-...._....._...I.-....... 5 Leveling it I....l.......l.-. ......-...l...-...l.l ......6
ft is important to prepare your refrigerator for use. This section will tell you how to clean it, connect it to
a power source, install it and level it.
Cleaning it
Clean your refrigerator before using it, if neces-
sary. See cleaning instructions on page 17.
Plugging it in
Recommended Grounding Method
A 115 Volt, 60 Hz., AC only 15 or 20 ampere
fused and properly grounded electrical supply is
required. It is recommended that a separate
circuit sewing only this appliance be provided.
Use a receptacle which cannot be turned off with
a switch or pull chain. Do not use an extension
cord.
See Electrical Requirements and Grounding
Instructions Sheet in your Literature Package.
3-prong grounding
type wall receptacle,
c
Refrigerator 1
power cord 7
grbunckg plug
Installing it
1. Allow % inch (1.25 cm) space on each side
and at the top of the refrigerator for ease of
installation.
2. If the refrigerator is to be against a wall, you
might want to leave extra space on the hinge
side closest to the wall so the door can be
opened wider.
3. The refrigerator can be flush against the wall.

Leveling it
Your refrigerator has 2 leveling screws-one on
the right and one on the left. To adjust one or
both of these, follow the directions below.
1. Remove base grille. (See page 14.)
2. To raise front, turn screw clockwise.
3. To lower front, turn screw counterclockwise.
4. Check with level.
5. Replace base grille. (See page 14.)
Front
r0h
Right lo raise;
lsfl to lowsr
u60 6 screwdriver
6

In This Section Page
Setting the controls ............................................ 7
Changing the control seltings.. ....-. ................. 9
Adjusting the rekigerabx 6hehW6 ....... . .......... .9
Removing the fi6ezef shelves ....“......- ............. 9
Removing the freezer door 6helv66 ...... “. ........ .9
Adjusting the shelf glide6 ............ . ....... .s........... 9
Removing the crisper 6nd crisper cover mI.... 10
Removing the meat drawer and cover .... ...... .10
Adjusting the meat drawer temperature.. ...... .10
Removing the freezer bin ................................. 11
Page
Using the ice cub6 trays..
..............................
11
Using the automatic ice maker .................... .ll
Using the automatic ice diepenoer.. ............ .12
Removing the ice maker storage bin .......... .13
Solving common ke maker/
crl6p6n6er problems ....................................... 14
Removing the base grille .............................. 14
Changing the light bulbs _........................ ... 15
Understanding the Sound6 you may hear. ..16
Saving energy ................................................ 16
In order to obtain the best possible results from your refrigerator, it is important that you operate it
properly. This section will tell you how to do just that.
Setting the controls
Controls for the-refrigerator and freezer are in the
refrigerator. When the refrigerator is plugged in for
the first time:
1. Set the Refrigerator Control to 3.
Refrigerator Control adjustments range from 1
(warmest) to 5 (coldest).
2. Set the Freezer Control to B.
Freezer Control adjustments range from A
(warmest) to C (coldest).
3. Give the refrigerator time to cool down com-
pletely before adding food. This may take
several hours.
The settings indicated above should be
correct for normal, household refrigerator
usage. The controls will be set correctly when
milk or juice is as cold as you like and when ice
cream is firm. If you need to adjust these
settings, see “Changing the control settings” on
page 8.
NOTE: The Automatic Exterior Moisture control
continuously guards against moisture build-up on
the outside of your refrigerator cabinet. This
control does not have to be set or adjusted.
7

Changing the control settings
lf you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart
below as a guide. If you have questions, call our
Consumer Assistance Center number. (See
page 23.)
l Adjust the Refrigerator Control first.
l Wait at least 24 hours between adjustments.
l Then adjust the Freezer Control if needed.
CONDITION: REASON:
lf Refrigerator Door opened often
Section is Large amount of food added
TOO WARM Room temoerature too warm
RECOMMENDED
CONTROL SElllNGS:
Refrigerator
Freezer i
lf Freezer
Section is
TOO WARM
lf Refrigerator
Section is
TOO COLD
If ICE isn’t
MADE FAST
ENOUGH
ff BOTH
SECTIONS
are TOO WARM
Door opened often
Large amount of food added
Very cold room temperature
(can’t cycle often enough)
Controls not set correctly
for your conditions
Refrigerator 3
Freezer C
Refrigerator 2
Freezer B
Heavy ice usage
Very cold room temperature
(can’t cycle often enough)
Door opened often
Large amount of food added
Very warm or very cold room
temperatures
Refrigerator
Freezer :
Refrigerator
Freezer i
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you
use your refrigerator. Glass shelves are strong
enough to hold bottles, milk and other heavy food
items.
To remove shelves:
1. Remove items from shelf.
2. Tilt shetf up at front.
3. Lift shelf up at back.
4. Pull shelf straight out.
To replace shelves:
1. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slots.
3. Lower front of shelf to level position.
NOTE: The above instructions apply to all
models in this manual (ED20PK with glass
shelves and ED20ZK and ED22ZR with wire
shelves).
Model EDSOPK:
Gfa66 shelver are
heavy. Be careful.
8

Removing the freezer shelves
To remove the shelves:
1. Lii right side of shelf off supports.
2. Slide shelf out of shelf support holes.
3. Replace in reverse order.
To adjust the shelves:
1. Remove shelf as above.
2. Remove supports by sliding upward.
3. Replace supports on desired level.
4. Replace shelf.
NOTE: The cup-shaped supports go in the back
of the freezer.
Removing the freezer door shelves (EDZZZR)
Shelves can be removed for easier cleaning.
To remove door shelves:
1. Grasp shelf at both ends.
2. Lift shelf up and pull out.
To replace door shek6:
1. Insert hooks into guides on both sides of door.
2. Push shelf down to lock into place.
Adjusting the shelf glides (EDZOPK)
The shelf glides can be used to secure odd-
shaped items or to separate other items.
1. Grasp glide.
2. Slide guide along track.
Slide along
track
NOTE: Shelf glides cannot be removed.
9

Removing the crisper and crisper cover
To remove the crisper:
1. Slide the crisper straight out to the stop.
2. Lift the front.
Pull out to the stop,
lift the front
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Push glass insert up from bottom, then slide
out with both hands.
2. Lift front of cover frame.
3. Lii cover frame out by pulling up and out.
To replace the cover:
1. Fit back of cover into notch supports on walls
of refrigerator, then lower front into place.
2. Slide back of glass insert into place, then
lower front into place.
Lift the cover
Removing the meat drawer and cover
To remove the meat drawer:
1. Slide the meat drawer out to the stop.
2. Lift the front.
3. Slide meat drawer out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Remove crisper, crisper cover and meat
drawer.
2. Tilt front of cover up, lift at back and pull
straight out.
3. Replace in reverse order.
Adjusting the meat drawer temperature
Cold air flows against the meat drawer through
an opening between the freezer and the refrig-
erator. This helps keep the meat drawer colder
than the rest of the refrigerator for better storage
of meats.
Slide the control to let more or less cold air
through.
10

Removing the freezer bin
For proper air movement, keep the freezer bin in
place when the refrigerator is operating.
To remove the bin:
1. Slide bin out to the stop.
2. Lii bin at the front to clear the stop.
3. Slide bin out the rest of the way.
To replace the bin:
1. Place bin on the slides.
2. Make sure the stops clear the front of the
slides.
3. Slide bin in.
Using the ice cube trays
If cubes are not used, they may shrink. The
moving cold air starts a slow evaporation. The
longer cubes are stored, the smaller they get.
To remove ice:
1. Hold tray at both ends.
2. Twist slightly.
Using the automatic ice maker
(Factory-installed on ED22ZR, optional on EDZOPK and EDZOZK)
If you have the automatic ice maker accessory
(Part No. ECKMF-90). or if you plan to add one
later, there are a few things you will want to
know:
l The ON/OFF lever is a wire signal arm.
Down ... to make ice automatically.
up ... to shut off the ice maker.
NOTE: Do notturn ice m-on
!xnnected to the water sup&. lnstructrons for
Jce maker water sup&m m
ed to the back of the refrlaerator
cabinet
l The dial or lever on the side of the ice maker
changes the size of the cubes.
l Shake the bin occasionally to keep cubes
separated and to obtain increased storage
capacity.
l It is normal for ice crescents to be attached by
a corner. They will break apart easily.
l You will hear water running when ice maker is
working. You’ll hear ice fall into the bin. Don’t
let these sounds bother you.
Raise
signal
arm to
Stop ice
maker.
Lower
signal
arm to
stat-t ice
maker.
On
@%a L ,)
11

l The ice maker will not operate until the freezer
is cold enough to make ice. This can take
overnight.
. Because of new plumbing connections, the first
ice may be discolored or off-flavored. Discard
the first few batches of ice.
l lf ice is not being made fast enough and more
ice is needed, turn the Refrigerator Control
toward a higher number. Wait a day and, if
necessary, turn the Freezer Control toward C.
l If you remove the ice bin, raise the signal arm
to shut off the ice maker. When you return the
bin, push it in all the way and lower the signal
arm to the ON position.
l lf cubes are stored too long, they may develop
an off-flavor ... like stale water. Throw them
away. Ice maker will make new ice. Cubes in
the ice bin can also become smaller by
evaporation.
l Good water quality is important for good ice
quality. It is not recommended that the ice
maker be connected to a softened water
supply. Water softener chemicals, such as salt
from a malfunctioning softener, can damage the
ice maker mold and lead to poor ice quality. ff a
softened water suppfy cannot be avoided, it is
important that the water softener be well
maintained and operating properly.
Using the ice dispenser (EDZZZR)
Personal Injury Hazard
Tumbling ice and pressure on a fragile
glass can break it. Do not use a fragile
glass when dispensing ice.
Doing so could result in personal injury or
breakage.
Ice is dispensed from the ice maker storage bin
in the freezer. When the dispenser bar is
pressed, a trapdoor opens in a chute between
the dispenser and the ice bin. Ice is moved from
the bin and falls through the chute. When the
dispenser bar is released, a buzzing sound may
be heard for a few seconds as the trapdoor
closes.
The dispensing system will not operate when
the freezer door is open.
NOTE: Large amounts of ice should be taken
from the ice bin, not through the dispenser.
To dispense ice:
1. Press a sturdy glass against the ice dis-
penser bar. Hold glass close to the dispenser
opening so ice does not fall outside of glass.
2. Remove the glass to stop dispensing.
NOTE: The first few batches of ice may have an
..
ott taste from new plumbing and parts. Throw the
ice away.
12

Removing the ice maker storage bin (ED~ZR)
Remove, empty and clean the storage bin if:
l the ice dispenser has not, or will not, be used
for a week or more.
l a power failure causes ice in the bin to mett and
freeze together.
l the ice dispenser is not used regularly.
To remove ice bin:
1. Pull the covering panel out from the bottom
and slide it to the rear.
2. Lift the signal arm so it clicks into the OFF (up)
position. Ice can still be dispensed, but no
more can be made.
3. Lift the front of the storage bin and pull it out.
4. Empty the ice bin. Use hot or warm water to
melt the ice if necessary. Never use anything
sharp to break up ice in the bin. This can
damage the bin and dispenser mechanism.
5. Wash with mild detergent. Rinse well. Do not
use harsh or abrasive cleaners or solvents.
6. When replacing the bin, make sure it is
pushed in all the way. Then push the signal
arm down to the ON position to restart ice
production.
13

Solving common ice maker/dispenser
problems
PROBLEM
ke dispenser
won’t work
CAUSE
l Freezer door open
l ke bin not properly
installed
l Wrong ice in bin
l Dispenser not used for
extended periods,
causing ice cubes to
melt together
SOLUIIONS
l Close the freezer door.
l Make sure bin is pushed in all the way.
l Use only crescents from ke maker.
Shake the bin occasionally to keep cubes
separated and to obtain increased storage
capacity.
l Dump old ice and make a new supply.
ke dispenser stops l Ice dispenser bar held
working
l Wait about 3 minutes for the dispenser
in too long motor to reset.
l Large amounts of ice should be taken
from the bin, not through the dispenser.
Off-taste or odor
in ice
l Ice attracts airborne
odors; old ice
l Water quality
l Foods not properly
wrapped
l Ice bin and freezer may
need cleaning
l Plumbing to ice maker
. New ice maker
l Dump old ice and make a new supply.
Store excess ice in covered container.
l Water containing minerals (such as suffur)
may require a filter to remove.
l Wrap properly. See pages 20 and 21.
l Clean freezer and ice bin. See cleaning
chart on page 17.
l Follow Installation Instructions for proper
ice maker water supply hook up. (See
back of refrigerator cabinet.)
l The first few loads of ice from a new ice
maker may have an off-taste. Dump ice
and make a new suppfv.
To remove the grille:
1. Open both doors.
2. Pull base grille forward to release the support
tabs from the metal clips.
3. Do not remove Tech Sheet fastened behind
the grille.
To replace the grille:
1. Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close the doors.
Condenser coils
I
Removing the base grille
See cleaning instructions for defrost pan and
condenser coils on page 18.
14

Changing the light bulbs
Electrical Shock Hazard
Before removing a light bulb, either unplug
the refrigerator or disconnect the electricity
leading to it at the main power supply.
Failure to do so could result in personal
i injury.
To change refrigerator light:
1. Disconnect refrigerator from power supply.
2. Reach behind the Control Console to remove
bulb.
3. Replace bulb with a 40-watt appliance bulb.
4. Reconnect refrigerator to power supply.
To change crisper light (ED22ZR):
1. Disconnect refrigerator from power supply.
2. Pull top of light shield forward until it snaps
free.
3. Lower light shield to clear bottom supports.
4. Pull light shield straight out to remove.
5. Replace bulb with a 40-watt appliance bulb.
6. Replace light shield in reverse order.
7. Reconnect refrigerator to power supply.
To change freezer light:
l_ Disconnect refrigerator from power supply.
2. Grasp front of light shield.
3. Pull bottom of light shield forward until it snaps
free.
4. Replace with a 40-watt appliance bulb.
5. Press light shield straight on until it snaps into
place.
6. Reconnect refrigerator to power supply.
NOTE: Not all commercial appliance bulbs will fit
your refrigerator. Be sure to replace bulb with one
of the same size and shape.
15

Understanding the sounds you may hear
Your new refrigerator may make sounds that your
old one didn’t. Because the sounds are new to
Water sounds
you, you might be concerned about them. Don’t When the refrigerator stops running, you may
be. Most of the new sounds are normal. Hard hear gurgling in the tubing for a few minutes after
surfaces like the floor, walls and cabinets can it stops. You may also hear defrost water running
make the sounds seem louder. into the defrost water pan.
The following describes the kinds of sounds
that might be new to you, and what may be
Ice maker sounds
making them.
l trickling water
Slight hum, soft hiss
l thud (clatter of ice)
lf your refrigerator has an automatic ice maker,
you may hear buzzing (from the water valve),
trickling water and the clatter of ice dumped into
You may hear the refrigerator’s fan motor and
moving air.
Clicking or snapping sounds
The thermostat makes a definite click when the
refrigerator stops running. lt also makes a sound
when the refrigerator starts. The defrost timer will
click when the defrost cycle starts.
the bin.
Running sounds
Your refrigerator has a high-efl iciency cornpres-
sor and motor. It will run longer than older
designs. It may even seem to run most of the
time.
Saving energy
You can help your refrigerator use less electricity.
l Check door gaskets for a tight seal. Level the
cabinet to be sure of a good seal.
l Clean the condenser coils regularly.
l Open the door as few times as possible. Think
about what you need before you open the door.
Get everything out at one time. Keep food
organized so you won’t have to search for what
you want. Close door as soon as food is
removed.
l Go ahead and fill up the refrigerator, but don’t
overcrowd it so air movement is blocked.
l It is a waste of electricity to set the refrigerator
and freezer to temperatures colder than they
need to be. lf ice cream is firm in the freezer
and drinks are as cold as your family likes
them, that’s cold enough.
l Make sure your refrigerator is not next to a heat
source such as a range, water heater, furnace,
radiator or in direct sunlight.
16

In This Section Page Page
Cleaning your refrigerator .....................#....“... 17 Power interruptiona ......... ..................,..... ..... 19
Vacation and moving can3 .................“I .......... 19
Your refrigerator is built to give you many years of dependable service. However, there are a few things
you can do to help extend its product life. This section will tell you how to clean your refrigerator and
what to do when going on vacation, moving or during a power outage.
Cleaning your refrigerator
Both the refrigerator and freezer sections defrost
automatically. But both should be cleaned about
once a month to help prevent odors from building
up. Spills should be wiped up right away.
To clean your refrigerator, turn the Refrigerator
Control to OFF, unplug it, take out all removable
parts and clean the refrigerator according to the
following directions.
Refrigeration system tubes are located near
the defrost pan and can become hot. Remove
and install defrost pan carefully.
Failure to do so could result in personal injury.
PART WHAT TO USE HOW TO CLEAN
Removable parts Sponge or cloth with mild
l Hand wash, rinse and dry thoroughly.
(shelves, crisper, etc.) detergent and warm water
Outside Sponge, cloth or paper towel
l Wash outside of cabinet. Do not use
with mild detergent, warm abrasive or harsh cleaners.
water and an appliance wax
(or good auto paste wax)
l Rinse and dry thoroughly.
l Wax painted metal surfaces at least
twice a year. Apply wax with a clean,
soft cloth. Waxing painted metal
surfaces provides rust protection.
Do not wax plastic parts.
Inside walls
(freezer should be
allowed to warm up
so cloth won’t stick)
Door liners and
gaskets
Sponge, soft cloth or paper
towel with baking soda or
mild detergent and warm
water
Sponge, soft cloth or paper
towel with mild detergent
and warm water
l Wash with mixture of warm water and
- mild detergent, or
- baking soda (2 tablespoons [26 g]
to 1 quart [.95 L) of water).
l Rinse and dry thoroughly.
l Wash, rinse and dry thoroughly.
DO NOT USE cleaning waxes,
concentrated detergents, bleaches or
cleaners containing petroleum on
plastic parts.
Plastic parts
(covers and panels) Soft, clean sponge or soft,
clean cloth with mild
detergent and warm water
l Wash, rinse and dry thoroughly.
DO NOT USE paper towels, window
sprays, scouring cleansers or
flammable fluids. These can scratch
or damage material. See “Important
Safety Instructions” on page 3.
17

PART
Defrost pan
WHAT TO USE
Sponge or cloth with
mild detergentand
warm water
HOW TO CLEAN
l Remove base grille. (See page 14.)
l To remove defrost pan, lift pan over wire brace
(remove tape: if any).
l Wash, rinse and dry thoroughly.
l Replace with notched comer to the rear. Push it
in all the way.
l Make sure defrost pan drain tube is pointing
into pan.
l Replace base grille.
Condenser coils Vacuum cleaner with
extended narrow
attachment
l Remove base grille.
l Vacuum coils when dusty or dirty. Coils may
need to be cleaned as often as every other
month.
l Replace base grille.
Floor under
refrigerator Floor cleaners
l Roll refrigerator out away from the wall.
l Clean floor.
l Roll refrigerator back into place.
l Check to see if the refrigerator is level.
Vacation and moving care
Long vacations
Remove all the food if you are going for a month
or more. If your refrigerator is equipped with an
automatic ice maker, turn off the water supply to
the ice maker at least once day ahead. When the
last load of ice drops, turn off the ice maker.
Make sure all ice is dispensed out of mechanism.
Unplug the refrigerator. Clean it, rinse well and
dry. Tape rubber or wood blocks to the tops of
both doors to prop them open far enough for air
to get in. This will keep odor and mold from
building up.
Personal Injury Hazard
Do not allow children to climb on, play near
or climb inside the refrigerator when the
doors are blocked open.
They may become injured or trapped.
To restart refrigerator, see “Using Your Refrigera-
tor” on page 7.
No need to shut off the refrigerator is you will be
Short vacations
away for less than four weeks. Use up perish-
ables; freeze other items. If you have an auto-
matic ice maker:
1. Turn off your ice maker by raising signal arm.
2. Shut off the water supply to the ice maker.
3. Empty the ice bin.
Moving
If your refrigerator is equipped with an automatic
ice maker, shut off the ice maker water supply at
least a day ahead. Disconnect the water line.
After the last load of ice drops, lift the signal arm
to turn off the ice maker.
Remove all food. Pack frozen food in dry ice.
Unplug the refrigerator and clean it thoroughly.
Take out all removable parts. Wrap all pans
well and tape them together so they don’t shift
and rattle. Screw in the leveling legs; tape the
doors shut; and tape the electric cord to the
cabinet.
When you get to your new home, put every-
thing back and refer to page 5. Also, if you have
an automatic ice maker, remember to reconnect
the water supply line.
18

Power interruptions-
If electricity goes off, call the power company.
Ask how long power will be off.
1. ff service is to be interrupted 24 hours or less,
keep both doors closed. This will help foods
stay frozen,
2. lf service is to be interrupted longer than
24 hours:
(a) Remove all frozen food and store in a
frozen food locker.
OR
(b) Place 2 Ibs. (0.9 kg) of dry ice in freezer for
every cubic foot of freezer space. This will
keep food frozen for 2 to 4 days. Wear
gloves to protect your hands from dry ice
burns.
OR
(c) lf neither a food locker or dry ice is avail-
able, use or can perishable food at once.
3. A full freezer will stay cold longer than a partly
filled one. A freezer full of meat will stay cold
longer than a freezer full of baked goods. If
food contains ice crystals, it may be safely
refrozen, although the quality and flavor may
be affected. If the condition of the food is poor
or if you feel it is unsafe, dispose of it.
Questions 7
Call our Consumer Assistance Center telephone
number, l-900-253-1 301, from anywhere in the
U.S.A.
Food Storage Guide
In This Section Page Page
Storing fresh food
............................................ 19 Storing frozen food .....................................- 20
There is a correct way to package and store refrigerated or frozen food. To keep food fresher, longer,
take the time to study these recommended steps.
Storing fresh food
Food placed in the refrigerator should be
wrapped or stored in air and moisture proof
material. This prevents food odor and taste
transfer throughout the refrigerator. For dated
products, check code date to ensure freshness.
Leafy vegetables
Remove store wrapping and trim or tear off
bruised and discolored areas. Wash in cold water
and drain. Place in plastic bag or plastic con-
tainer and store in crisper.
Vegetables with skins
(carrots, peppers)
Store in crisper, plastic bags or plastic container.
Fruit
Wash, let dry and store in refrigerator in plastic
bags or crisper. Do not wash or hull berries until
they are ready to use. Sort and keep berries in
their store container in a crisper, or store in a
loosely closed paper bag on a refrigerator sheff.
EmIs
Store without washing in the original carton on
interior shelf.
Milk
Wipe milk canons. For best storage, place milk
on interior shelf.
19