Whirlpool WRQA59CNKZ User manual

FRENCH DOOR BOTTOM MOUNT REFRIGERATOR
PRODUCT GUIDE
W11643160A
GUIDE DU RÉFRIGÉRATEUR À PORTE À DOUBLE
BATTANT ET CONGÉLATEUR EN BAS

2
Shelves, Bins and Drawers
Shelf Height Adjustment and Shelves and Shelf Frames
Shelf height can be adjusted by changing its location from bottom
support to upper support and vice versa.
■Open the right side door and left side door to it’s full opening.
■Take shelf out of refrigerator and place it to desired mounting
position.
■Ensure shelf is properly seated on the shelf mounts.
The shelves in your refrigerator are adjustable to meet your
individual storage needs.
Storing similar food items together in your refrigerator and
adjusting the shelves to t different heights of items will make
nding the exact item you want easier. It will also reduce the
amount of time the refrigerator door is open and save energy.
To remove and replace shelves:
1. Open the right side door and left side door to its full opening.
2. Remove middle shelf or top shelf by lifting it up and out of
shelf supports. Then pull the shelf forward and tilt down to
a vertical position. Turn shelf at an angle and pull out of the
refrigerator.
3. Remove the bottom shelf by lifting it up and out of the shelf
supports. Then pull the shelf forward and tilt up to a vertical
position. Turn the shelf at an angle and pull out of refrigerator.
4. Replace middle and top shelves by putting shelf in the
refrigerator at an angle with shelf front down. Lift front of the
shelf up and slide in until the rear of shelf drops into shelf
supports. Lower the front of shelf and make sure that the shelf
is in position.
5. Replace bottom shelf by putting shelf in refrigerator at an
angle with shelf up. Lift front of shelf down and slide in until
rear shelf drops into the shelf supports. Lower front of the
shelf and make sure that shelf is in position.
Crispers
To remove and replace the Crispers:
1. Open the right side door and left side door to it’s full opening.
2. Grasp handle of the Crisper and slide Crisper straight out to
the stop. Lift the Crisper off the bottom guide.
3. Replace/putting back the Crisper by placing it on bottom
Crisper guide and pushing it past the Crisper stop into
position.
Ice Bin
Ice storage for second ice maker.
Important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
Tempered glass is designed to shatter into many small,
pebble-size pieces. This is normal. Glass shelves and covers
are heavy. Use both hands when removing them to avoid
dropping.
130° 130°
Crisper
CAB
A. Full width removable rack
B. Third Tier
C. Ice Bin

3
Refrigerator Bins
The bin on your refrigerator door are adjustable to meet your
individual storage needs.
■The center bin position can be adjusted in two xed points.
To remove the bin pull it up by applying force on both bottom
sides where the bin is engaged to the door lug. Install it in the
other position by pressing it down until the door lug is fully
engaged to the bin.
■Free up shelf space with four gallon door bins that t items
like gallon milk.
Freezer Storage Compartments
Pullout Freezer Shelves and Drawers
Easily store large or small items in the pull out freezer tray shelves
NOTE: To open the trays to it’s full extend please refer to the
space required at the refrigerator side to open the doors at the
required minimum angle. Find detailed information in the
“Installation Instructions”.
Full width removable rack
The Full width removable rack is located in the freezer
compartment below the ice bin tray.
To remove the full width removable rack:
■Remove the content of the ice bin and from the full width
removable track.
■Remove the ice bin from the freezer tray.
■Remove the freezer tray with bin from the freezer
compartment pulling it out.
■On the back of the tray, pull the wire up and backwards to
disengage the rack from the tray in the area shown in the
picture below.
Gallon Bin
Standard Bin
Freezer
Shelves
CAB
A. Full width removable rack
B. Third Tier
C. Ice Bin

Drawer
NOTE: To open the drawers to it’s full extend please refer to the
space required at the refrigerator side to open the doors at the
required minimum angle. Find detailed information in the
“Installation Instructions”.
Fast Freeze compartment
■Use these drawers and shelves to freeze a bigger amount of
fresh or cooked food (in the best or in the fastest way).
■Fast Freeze option allows you to store all your frozen food
safely and transparently.
NOTE: Freezer temperature might be cooled down to be same
as Multi Temperature Freeze Compartment temperature, when
Freezer set to warmer than Flexible Freezer compartment.
Multi Temperature Compartment
Multi Temperature Freeze Compartment allows you to select one
of three freezer temperature levels: -7°C, -12°C, -18°C and -20°C
to provide the best storing conditions for different types of food.
For maximum freezer capacity, you may remove the freezer
drawer to expose the freezer shelf.
To remove the upper drawer:
1. Grasp handle of the drawer and slide drawer straight out to
the stop. Lift drawer off the bottom guide.
2. Replace/putting back drawer by placing it on bottom drawer
guide and pushing it past drawer stop into position.
Freezer Drawers
4