Whirlpool Cabrio,- WTW6300W Service manual

Top Load Washer
PRODUCT MODEL NUMBERS
DRAIN SYSTEM OPTIONS
Electrical: A 120 volt, 60 Hz., AC o ly,
15- or 20-amp, fused electrical supply is required.
A time-delay fuse or circuit breaker is recomme ded.
It is recomme ded that a separate circuit servi g
o ly this applia ce be provided.
Because Whirlpool Corporatio policy i cludes a co ti uous commitme t to improve
our products, we reserve the right to cha ge materials a d specificatio s without otice.
Dime sio s are for pla i g purposes o ly. For complete details, see I stallatio
I structio s packed with product. Specificatio s subject to cha ge without otice.
Ref. W10240438B
09/2009
RECESSED AREA OR CLOSET INSTALLATION
For closet i stallatio , with a door, the mi imum ve tilatio ope i gs i the top a d
bottom of the door are required (view C). Louvered doors with equivale t air ve tilatio
ope i gs are acceptable.
Laundry tub drain system (view C)
The lau dry tub eeds a mi imum
20 gal. (76 L) capacity. The top of the
lau dry tub must be at least 39"
(990 mm) above the floor a d o
higher tha 96"(2.4 m) from the
bottom of the washer.
Floor drain system (view D)
The floor drai system requires a sipho
break that may be purchased separately.
The sipho break must be a mi imum of
28"(710 mm) from the bottom of the
washer. Additio al hoses might be
eeded.
A
Front view
B
Side view
C
Closet door with vents
AB CD
Standpipe drain system - wall or floor (view A & B)
The sta dpipe drai requires a mi imum diameter sta dpipe of
2"(51 mm). The mi imum carry-away capacity ca be o less
tha 17 gal. (64 L) per mi ute.
The top of the sta dpipe must be at least 39"(990 mm) high
a d o higher tha 96"(2.4 m) from the bottom of the washer.
MTW6200V, WTW6500W, WTW6800W
WTW6300W, WTW6340W
17"*
(431.8 mm)
1"
(25 mm)
271/2"
(699 mm)
1"
(25 mm)
27"
(686 mm)
5"
(127 mm)
24 "
2*
(155 cm2)
48
"
2*
(310 cm2)
14"
*
max
(356 mm)
3 "
*
(76 mm)
3
"
*
(76 mm)
1"*
(25 mm)
39"
(990 mm)
39"
(990 mm)
28"
(710 mm)
* Required Spaci g