Whirlpool LSP6244BN0 User manual

-.
emol’
UseAndCare
A Note To You 2
Understandng
Washer Safety 3
Knowing Your
Washer’s Features 4
0
vs”b
‘ng Your
astmr 5
Laundry Tips 12
If You Need
~~-or 22
Warranty 24
1-800-253-1301
cdlU8withqu88tion8orcomm8nt8.
TWO SPEED AUTOMATIC WASHERS

A Note ToYou
Thank you for buying a Whirlpool appliance.
You have purchased a quality, war/d-c/ass home appliance. Years of engineering experience have
gone into its manufacturing. To ensure many years of trouble-free operation, we have developed
this Use and Care Guide. It is full of valuable information on how to operate and maintain your
appliance property and safely. Please read it carefully. Also, please complete and mail the Owner-
ship Registration Card provided with your appliance. This will help us notify you about any new
information on your appliance.
Your safety is important to us.
This guide contains safety symbols and statements. Please pay special attention to these symbols
and follow any instructions given. Here is a brief explanation of the use of each symbol.
This symbol will help alert you to such dangers
as personal injury, bums, fire and electrical
shock.
This symbol will help you avoid actions which
could cause product damage (scratches,
dents, etc.) and damage to your personal
Property.
Our Consumer Assistance number, 1-800-253-1301. is
toll-free 24 hours a day.
If you have a question concerning your appliance’s operation, or if you need service, first see ‘If
You Need Assistance Or Service” on page 22. If you need further help. call us. When calling, you
will need to know your appliance’s complete model number and serial number. You can find this
information on the model and serial number plate (see diagram on page 4). For your convenience,
we have included a handy place below for you to record these numbers, the purchase date from
the sales slip and your dealer’s name and telephone number. Keep this book and the sales slip
together in a safe place for future reference.
Model Number
Serial Number
Purchase Date
Dealer Name
Deakr Phone

IMPORTANT SAFETY INSTRUCTIONS
To reduce the rbk of fire, electrical rhock or injury to persona
when using your wmher, follow basic precautions, including the
l Read all instructions before using your l Do not tamper with the controls.
washer. l If your hot water has not been used
l Do not machine wash or machine dry recently (usually 2 weeks or longer),
items deaned, washed, soaked in, or hydrogen gases may build up in your
spotted with wax, paint, gasoline, oil, or water heater and your hot water pipes.
other flammable fluids. The fumes can HYDROGEN GAS IS EXPLOSIVE. To
create a fire hazard or explosion. Always prevent injury or damage, before using
hand wash and line dry items containing your washer, turn on all hot water faucets
these materials. and allow water to run for several min-
. Flammable fluids (dry-cleaning solvents, utes. This will allow gases to escape. Do
kerosene, gasoline, etc.) should not be not smoke or use any open flame near
used or stored in or near your washer. Do your faucet while it is open.
not add flammable fluids to your wash Please ...
water. These substances give off vapors
that can create a fire hazard or explosion. l Have only a qualified person install,
repair, or replace parts on washer.
l Do not allow children to operate, play with,
or crawl on or inside your washer. Super-
vise children closely when your washer is
used near them.
l Maintain washer properly.
* Protect washer from the weather and
keep it where the temperature will not fall
below freezing.
l Before your washer is removed from
service or discarded, remove the lid to
prevent accidental entrapment.
l After starting a cycle, do not reach into the
basket unless the Cycle Control Knob is
pushed in and all motion stops.
l Install and level washer on a floor that
can support the weight.*
l Connect washer to the correct 3-prong
outlet, electrical supply, water supply, and
drain.’
l Ground washer properly.’
*See the Installation Instructions.
Understanding your responsibilities
l Store detergent, laundry aids and other l Do not use chlorine bleach and ammonia
materials in a cool, dry place where
children cannot reach them (in a locked or acids (such as vinegar or rust re-
cabinet if possible). mover) in the same wash. Hazardous
fumes can form.
l Read and follow instructions on pack-
ages of detergent and laundry aids,
especially warnings and precautions.
l Do not wash or dry items that are soiled
with vegetable or cooking oil. These
items may contain some oil after launder-
. Unplug power supply cord before
attempting to service your washer.
l Do not machine wash fiberglass materi-
als. Small particles can stick to the
fabrics washed in following loads and
cause skin irritation.
ing. Due to the remaining oil, the fabric
may smoke or catch fire by itself.
- SAVE THESE INSTRUCTIONS -
3

Knowing Your Washer’s
Feature5
The parts and features of your washer are illustrated in this section. Become familiar with all parts
and features before using your washer.
NOTE: The drawings in this book may vary from your washer model. They are designed to show
the different features of all models covered by this book. Your model may not include all features.
conrumu Ad8tmce
Contw numbr
Modal l rlal
\
Other features not shown:
MAGICCLEAN. lint CltaP
Mnual clan lint fdtu (lnoida agitator)
.-.
kc
I
(und& lid)
-Bleach dispnaw’
Tub
*Available on some models
4

Operating Your Washer
Paw
I
In This Section
Beforo
l t9rting your wa8her I5............................. Sebcting a cycb nd time .............................. 6
Stmrting or stopping your washw .....................5 Using rime nd spin ........................................ 6
sobc6ng s load slzo ............................... ..“.- ..5 Using drain nd spin ....................................... 9
Sobdng wsshdnso temperaluros .................6 What happsns in mch cycb ........................... 9
Operating your washer properly ensures maximum washing efficiency. This section gives you
important information to help you to select a cycle, time, and temperature for your wash load.
Before starting your washer
Add measured detergent. Then place a sorted NOTE: If your washer has a Consumer
load in the washer before starting. See page 12 Feature Guide, remove it and place it in your
for additional “Before you wash” information. Use and Care Guide.
Starting or stopping your washer
Starting your washer:
1. Select a load size and water temperature.
2. Push in and turn the Cycle Control Knob
clockwise. Stop when the indicator on the
knob’s outer ring points to the number in the
wash cycle you want. The numbers are
minutes of wash time.
3. Pull out the Cycle Control Knob.
Refer to pages 6-9 for additional information to
help you make selections.
Stopplng and restarting your washer:
*To stop the washer at any time, push in the
Cycle Control Knob.
.To restart the washer, close the lid (if neces-
sary) and pull out the Cycle Control Knob.
Selecting a load size
Your washer has a knob or slide Load Size
Selector. Position the Load Size Selector at
the setting that corresponds to the size load
you want to wash.
Select a load size based upon the size of
the load and the fabric you are washing. See
page 12 for additional loading information.
l If your washer has a knob Load Size Selec-
tor, turn selector to the desired load size.
Smtting mmyv8ry with & 5

l If your machine has a slide Load Size Selec-
tor, you may set the load size anywhere on or
between the small and ex large settings.
To change the load size setting after the washer
has started to fill, move the Selector to the
desired new setting.
NOTE: If your washer has RESET on the Load
Size Selector, change the load size selection by
first moving the Selector to RESET, then to the
new load size.
Load size tips
l Items should move freely in the washer. Do
not overload the machine or select a load size
that is too small for the wash load.
l Use a large load size setting for best results
with permanent press clothes.
Slide selector with “Reset”
l Reduce wash time when using a small load
size setting. Loads with only a few small
items need less wash time.
Selecting wash-rinse temperatures
Your washer has a knob, CLEAN TOUCH”’ or
push button Water Temperature Selector. Match
the water temperature to the type of fabric and
soils being washed. The top temperature is the
wash water and the bottom temperature is the
rinse water.
CLEAN TOUCH selector-
NOTE: The Regular cycle features all cold
rinses.
Water temperature tips
l Use warm wash water with the Permanent
Press and Delicate cycles.
an indicator appears
above the water
temperatures selected
l Always use cold rinse water for permanent
press fabrics.
Push button selector
l For heavily soiled permanent press or knit
clothes, prewash or presoak before washing in
warm water. See the “Water usage guide’ on page 16 for
more information.
Selecting a cycle and time
6
Cycles may vary with model

Heavy cycle
The Heavy cycle features the Gentle Wash
System and high agitation and spin speeds.
l Use 12 minutes of wash time to clean large
loads of sturdily constructed fabrics that are
heavily soiled.
l Use 6-9 minutes of wash time to clean
sturdily constructed fabrics that are lightly to
moderately soiled.
l Q&k cycle (on some models)-Use this
cycle to wash sturdily constructed fabrics that
are lightly soiled.
Regular cycle
The Regular cycle features the Gentle Wash
system and high spin speeds to shorten drying
time. All rinses are cold.
l Use 12 minutes of wash time to clean cotton
and linen fabrics that are heavily soiled.
l Use 9 minutes of wash time to clean cotton
and linen fabrics that are moderately soiled.
l Sdlwash cycle (on some models)-Use this
cyde for cotton and linen fabrics that are
lightly soiled.
NOTE: The Regular cycle features all cold
rinses.
Permanent Press cycle
The Permanent Press cycle features the Gentle
Wash system, a cool-down rinse, and low spin
speeds to reduce wrinkling.
l Use 9 minutes of wash time to clean perma-
nent press and some synthetic fabrics that are
moderately soiled.
l Use 6 minutes of wash time to clean perma-
nent press and some synthetics that are lightly
soiled.
NOTE: The washer pauses briefly during the
wash cycle. This is nomal for washer operation.
Dotkate cycb

Soak cycle
(on some models)
The Soak cycle features brief periods of
agitation and soak time to help remove heavy
soils and stains that need pretreatment.
l Use warm water when soaking laundry. (Hot
water can set stains.) See pages 13-l 5 for
stain removal information.
l Use the amount of detergent or presoak
additive recommended by manufacturer.
l After the Soak cycle ends, add detergent and
set a new wash cycle.
Pm-Wash cycle
(on l ome models)
The Pre-Wash cycle features a brief period of
agitation to help remove heavy soils and stains
that need pretreatment.
l Use warm water for prewashing stained
laundry. (Hot water can set stains.) See
pages 13-l 5 for stain removal information.
l After the Pre-Wash cycle ends, add deter-
gent and set a new wash cyde.
Super Wash cycle
(on mm0 models)
Super Wash automatically prewashes the
laundry and advances into the Heavy cycle.
(The washer does not need to be reset after
the Super Wash cycle.) Use this cycle when
washing heavily soiled loads that need maxi-
mum soil removal.
l For proper cleaning use double the amount
of detergent recommended for a wash cycle.
NOTE: The machine pauses during Super
Wash. This is normal for washer operation.
Using rinse and spin
NOTE: If your washer has the Extra Rinse
option, see page 10.
When using extra detergent for heavily soiled
clothes, or washing special-care items, you
may want an extra rinse and spin.
1. Push Cycle Control Knob in and turn
clockwise to RINSE, as illustrated.
2. Pull Cycle Control Knob out. The washer
will fill to selected load size, agitate, drain,
and spin.
6
So& cycb
Pro-wrh cych

Using drain and spin
A drain and spin may help shorten drying
times for some heavy fabrics or special-care
items by removing excess water.
1. Push Cycle Control Knob in and turn
clockwise to SPIN, as illustrated.
2. Pull Cycle Control Knob out. The washer
will drain and spin.
What happens in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (to the
selected load size) before agitation and timing
start. The washer will begin agitating immedi-
ately after filling; agitation can occur with the
washer lid up or down. After agitation starts,
the Cycle Control Knob turns clockwise until it
points to OFF and the cycle ends.
The washer pauses brlefly throughout oath
cycle. These pauses are normal for washer
operation.
NOTE: A Gentle Wash system helps protect
your fabrics by reducing wash agitation speed
during the last few minutes of wash agitation in
the Regular and Permanent Press cycles.
WASH RINSE
M
4
Fill
Wash selected time
Fill
Rinse
Drain (or partial drain’)
No agitation Drain-No agitation
Spin
NOTE: Wash agitation speed is reduced
during the last few minutes of wash agitation
in the Heavy, Regular, and Permanent Press
cycles.
l3RJ
Spin-Spray rinse
Spin
9

Other Features
I
In This Section
Paw
I
Lint Cltem .......................................................... 10 Using the fabric softener dispensw
............
11
Using the exlra rin80 option ............................ 10 Using the chlorim blmch dispensw ...........ll
Your washer may have some of the following features. Understanding the use of the features on
your machine will help you efficiently use your washer.
Lint filters
Your washer has either a self-cleaning lint filter (requires no cleaning by you) or a manual clean
lint filter. Check the shape of your agitator to see if you need to clean your lint filter.
AGlTATOR ABOUT YOUR FILTER FILTER
Spird-shapod
8gltator
Bar&hap4
agitator
MAGIC CLEAN. lint filter
This lint filter requires no cleaning. (The lint
filter at the bottom of the washer basket cleans
itself.) During agitation, wash and rinse water
pass over the filter, separating the lint from the
water. The lint is then spun away from the filter
and out of the system during the spin part of
the cycle.
If your washer drains into a tub, remove any
lint collected in the tub or strainer.
Manual clean lint filter
If your agitator is barrel shaped, as illustrated, your
machine has a manual clean lint filter. Clean the
filter at the bottom of the agitator after every load
for the best filtering results.
To clean:
1. Lift off the agitator barrel.
2. Wash or wipe the filter dean in the bottom of the
agitator barrel. The filter is not removable.
3. Replace agitator barrel. Snap it into place.
Using the extra rinse option
You can select an extra rinse in all cycles
except the Regular cycle.
l Before a cycle starts, select Extra Rinse ON.
The washer automatically adds an extra
rinse and spin to the cycle.
l If no extra rinse and spin is desired, select
Extra Rinse OFF.
NOTE: On CLEAN TOUCH- models, the ‘On’
indicator appears when an Extra Rinse is selected.
MAGIC
CLEAN
lint filter
Baikat
interior
idaAd clean
lint filter
10

Using the fabric softener dispenser
(on some nlodds) Dilute fabrii wftener
with warm water to
1. Add detergent and load the basket.
2. Add liquid fabric softener to the dispenser
using the amount recommended on the
package. Avoid dripping or spilling any
fabric softener on the load.
3. Dilute fabric softener with warm water. Fill
dispenser with warm water until liquid
reaches the cross-bar in the pouring well.
4. Start the washer. Diluted fabric softener will
be added to the load during the final rinse.
NOTE: Do not stop the washer before the
final rinse begins. Staining can occur.
Flush dispenser periodically with warm water.
l To remove the dispenser, grasp the top of
the dispenser with both hands. Squeeze and
push upward with thumbs to remove.
l Clean dispenser by holding under water
faucet. Replace after cleaning.
NOTE: Do not wash clothes with dispenser
removed. Do not add detergent or bleach to
dispenser. The dispenser can clog.
Flush to 4
Add fabric softener and water
Clean the dispenser
Using the chlorine bleach dispenser
Always measure liquid chlorine bleach. Do not
guess Never use more than 1 cup (250 mL) for
a full toad. Use less with lower water level
settings. Follow manufacturer’s directions for
safe use. Use a cup with a pouring spout to
avoid spilling.
1. Load the washer.
2. Pour measured chlorine bleach carefully into
dispenser. Do not let bleach splash, drip or
run down into washer basket. Undiluted
bleach will damage any fabric it touches.
3. Start the washer. Bleach will be diluted
automatically during wash part of cycle.
NOTE: Do not add powdered chlorine or all-
fabric bleach to the dispenser. The dispenser
can clog.
11

Laundry Tips
In This Section PWP PW
Bofofe you wash ............................................... 12 solving laundulng pro4Iamo ...................... .20
&moving l tairu ............................................... 13 Caring for your wwhmr .................................. 21
Water usage guids ............................................ 16 Care during pwio& of non-use ...................21
Using laundry &a ........................................... 17 6avlng allergy ................................................ 21
Washing special-cue itwnr ............................ 16
This section reviews proper laundering techniques, gives you additional washing information, and
discusses solutions to common laundering problems.
Before you wash
Preparing clothes for washing
l Close zippers, snaps, and hooks to avoid
snagging other items. Remove
pins, buckles, and other hard
objects to avoid scratching
the washer interior. Remove
unwashable trim and
l Empty pockets and turn them inside out.
l Turn down cuffs and brush away lint and dirt.
l Turn synthetic knits inside out to avoid pilling.
l Tie strings and sashes so they will not tangle.
l Mend tears, loose hems and seams.
l Treat spots and stains. (See page 13 for
pretreatment and stain removal infomation.)
l Stained or wet garments should be washed
promptly for best results.
Sorting
l Separate heavily soiled items from lightly
soiled ones even if they would
normally be washed together.
Separate lint givers (towels,
chenille) from lint takers (cordu-
roy, synthetics, permanent
press). When possible, turn lint givers
inside out.
l Separate dark from light colors, colorfast from
noncolorfast.
l Sort by fabric and construction (sturdy
cottons, knits, delicate items).
Loading
l Drop items into washer loosely. Fill to the top
LEl
of the basket, but do not pack or
wrap items around the agitator.
Items should move easily
through wash water for best
cleaning and wrinkle-free
results. Watch for rollover. Items should sink
and reappear later.
l Load washer properly. Overloading or
packing can:
-cause poor cleaning.
-increase wrinkling.
-create excessive lint.
-wear out items faster (because of pilling).
l Load by the amount of space items take up,
not by their weight.
l Mix large and small items in each load. Load
evenly to maintain washer
balance. An off-balance load
can make the machine vibrate
during spin. To reduce wrinkling,
permanent press and synthetic
knits should have more room to move in the
water than heavy items (towels, jeans).
12

Loading suggestions
For these suggested full-sized loads, use the highest load size setting.
LARGE CAPACITY WASHERS
Heavy Work Clothes Permanent Press
2 pair pants 1 double sheet
3 shirts 1tablecloth
3 pair jeans 1 dress
1 coverall 1 blouse
Knits 2 slacks
3 shirts
2 slacks 2 pillowcases
2 blouses
4 shirts
4tops
2 dresses
EXTRA LARGE CAPACITY WASHERS
Mixed Load
2 double or 1 king
size sheet
4 pillowcases
6 T-shirts
6 pair shorts
2 shirts
2 blouses
6 handkerchiefs
Towels
8 bath towels
8 hand towels
10 wash cloths
1 bathmat
DeliCatH
2 camisoles
4 slips
4 panties
2 bras
2 nighties
Heavy Work Clothes
3 pair pants
3 shirts
4 pair jeans
1coverall
1 overall
Knits
3 slacks
3 blouses
6 shirts
4 tops
4 dresses
Permanent Press
2 double or 1 king
size sheet
1tablecloth
1 dress
1 blouse
2 slacks
3 shirts
2 pillowcases
Mixed Load
3 double sheets
4 pillowcases
8 T-shirts
6 pair shorts
2 shirts
2 blouses
8 handkerchiefs
Towels
10 bath towels
10 hand towels
14 wash cloths
1 bathmat
Deli&es
3 camisoles
1 robequilted
4 slips
4 panties
2 bras
2 nighties
1 baby’s dress
Removing stains
Stained, heavily soiled or greasy items may
need to be prewashed or soaked for best
results. Soaking helps remove protein-type
stains like blood, milk, or grass. Prewashing
helps loosen soil before washing.
Pre-washing or soaking
Use warm water for soaking or prewashing
stained laundry. Hot water can set stains.
3. How old the stain is. (Washing and drying
can set some stains.)
l Start with cold or warm water. Hot water can
set some stains.
l When bleach is recommended, use a bleach
that is safe for the fabric. Dilute chlorine
blanch
-.-I-. ..
l Test stain removers on an inside seam or
hidden comer of the item to see if the color is
Stain removal rules
removed.
l Most stains are easier to remove when they l Put the stained area face down on a paper
are fresh. Old or set stains may not come out. towel or white cloth. Apply the stain remover
Follow package directions for pretreatment to the back of the stain. This can force the
products. stain off the fabric instead of through it.
l Before treating any stain, find out ... l Meat tenderizer or enzyme presoaks help
1. What kind of stain it is. break down some protein stains so they are
2. What kind of fabric it la and if it is easier to remove.
colorfast. (Check label.) l Use nonflammable dry cleaning solvents in a
well-ventilated room. 13

Stain removal guide
STAIN TO REMOVE
Alcoholic
beverage These stains turn brown with age, so treat immediately. Sponge or soak fresh
stains with cold water. Wash. If stain remains, soak 15 minutes in a solution of
lukewarm water, liquid detergent and a few drops of white vinegar. Rinse. Wash.
Blood Rinse immediately or soak in cold water with enzyme presoak for 30 minutes or
longer. Rinse. Rub detergent into any remaining stains. Rinse. If stain remains,
put a few drops of 3% hydrogen peroxide on stain for 3-5 minutes. Rinse
thoroughly. Wash.
Chewing Use ice to make gum hard. Scrape off what you can. Sponge with a nonflam-
gum mable dry cleaning solvent. Let dry. Wash.
Chocolate or Sponge immediately with a nonflammable dry cleaning solvent or apply a
coffee prewash soil and stain remover. Rinse. Wash. If stain remains, apply a liquid
detergent to stain or soak in warm water with an enzyme presoak. Rewash.
Crayon and Scrape off excess with a dull knife. Place fabric between two blotters or facial
candle wax tissue. Press with warm iron. Remove color stain with nonflammable dry clean-
ing solvent. Hand wash until stain is gone. If full load is crayon stained, take to
cleaners or coin-operated dry cleaning machine.
Cream, milk Sponge with a nonflammable dry cleaning solvent, or a prewash soil and stain
or kc cream remover. Rinse. Wash. Repeat if necessary. If stain remains, apply a few drops
of liquid detergent and a few drops of ammonia. Blot dry and rinse. If stain
remains, soak in an enzyme presoak. Wash.
Deodorants Llght &In: Treat with liquid detergent or your regular laundry detergent. Wash
and anti- in hottest water safe for fabric.
penpirants Heavy staln: Place face down on towel and treat with a paste of ammonia and
all-fabric bleach. Let stand for 30 minutes. Wash in hottest water safe for fabric.
Fat, grease Items soiled with vegetable or cooking oil should not be washed or dried. See
or oil vegetable/cooking oil Warning on page 3. For other types of greasy stains, use
one of the methods below:
l Use pretreatment stain remover. Follow label directions. Wash in hottest water
safe for fabric.
Fruit stains
l Use talcum powder to absorb as much grease as possible. Sponge with a
nonflammable dry cleaning solvent. Rinse. Wash.
l Treat with liquid detergent or rub a detergent paste on the stain. Wash using
hottest water safe for fabric.
Fresh et&s: Soak immediately in cool water. Wash. If stain remains, cover
area with a paste made of all-fabric bleach, a few drops of hot water and a few
drops of ammonia. Wait 15 to 30 minutes. Wash.
Old &Ins: Sponge with white vinegar. Rinse. Repeat procedure for fresh
stains.
Grass or
w-n
vegetables
Ink or
ballpoint
pen ink
Soak in warm or cold water with an enzyme presoak for at least 30 minutes, or
sponge with denatured alcohol. Wash in water temperature and bleach safe for
the fabric. For colored fabrics, check colorfastness before applying alcohol. For
acetate, sponge with a nonflammable dry cleaning solvent. If stain remains,
bleach with 3% hydrogen peroxide. Rinse. Rewash.
Spray stain with an aerosol hair spray or rubbing alcohol. Sponge stain continu-
ously until all bleeding stops. Let dry. Repeat if necessary. Wash. If stain
remains, bleach if safe for fabric. (India and other indelible inks are almost
impossible to remove completely.)
14

STAIN TO REMOVE
Iron or rust Colored or noncolorfast items: Apply lemon juice and salt. Place in the sun
to dry. Rinse thoroughly. Repeat if necessary.
Whlto or color-fact items: Try a rust remover. Test first on inside seam or
hem. Some rust removers are not washer safe. Follow package directions.
Ketchup or Sponge immediately with a nonflammable dry cleaning solvent or apply a
tomato prewash soil and stain remover. Rinse. Wash. If stain remains, apply a liquid
product8 detergent to stain or soak in warm water with an enzyme presoak. Rewash.
Liprtick Apply nonflammable dry deaning solvent or prewash soil and stain remover.
Blot with absorbent material. Repeat if necessary. Rinse. If stain still remains,
rub with liquid detergent. Wash.
Meal juice, Scrape off excess with a dull knife. Soak in cold or warm water with enzyme
egg presoak at least 30 minutes, or treat stains with a nonflammable dry cleaning
solvent. Wash.
MikkW
Wash in hottest water safe for fabric. If stain remains, soak in warm water and
an all-fabric bleach for 15 to 30 minutes. Rewash. (Old mildew stains are
almost impossible to remove. Mildew fungus destroys or weakens fabrics.)
An alternative to bleach is to treat with salt and lemon juice and dry in direct
sunlight. Rinse and rewash. Mildew may form if wet or damp laundry remains in
your washer for extended periods of time. To prevent mildew, promptly dry
laundry after washing.
Mustard Treat immediately. Scrape off excess mustard. Sponge with a nonflammable
dry cleaning solvent or a prewash soil and stain remover. Rinse. Work liquid
detergent and a few drops of vinegar into stain. Rinse. If stain remains, apply
3% hydrogen peroxide. Rinse and wash.
Paint Hand wash paint-stained items.
Water base: Treat stains while still wet. (These paints cannot be removed after
they have dried.) Rinse in warm water to flush out paint. Sponge with a
nonflammable dry deaning solvent. Rinse. Wash.
011base: Scrape off fresh paint. Sponge with a nonflammable dry cleaning
solvent or treat stain with recommended thinner. While stain is still wet with
solvent, rub liquid detergent into it. Wash with hottest water safe for fabric.
Perspiration Remove stains before ironing. Perspiration stains may weaken fabric. Wash or
sponge stain thoroughly with detergent and warm water. If perspiration has
changed the color of the fabric, use one of the following treatments:
Fresh stalnr: Apply ammonia to stain. Rinse. Launder to remove ammonia
odor.
Old stains: Apply white vinegar to stain. Rinse. Launder to remove vinegar
odor.
Scorch Severe scorch cannot be removed. Wet stain with 3% hydrogen peroxide.
Cover with a dry cloth and press with an iron as hot as is safe for fabric. Rinse
well. Wash.
OR
Wet with lemon juice and spread in the sun to dry. Wash.
Soft drinks Sponge immediately with cold water and alcohol. Heat and detergent may set
stain.
15

Water usage guide
Water temperature
WASH
HOT
130°F (54°C)
or above
WARM
go’-1 10°F
(32’-44%)
RINSE USE FOR COMMENTS
COLD l Heavy soils l Gives best cleaning for heavy
l Work clothes soils.
l Sturdy whites and l Removes oils, perspiration, greasy
colorfast pastels soils and stains.
l Diapers l Prevents graying and yellowing.
COLD l Light and moderate soils l Safe for most fabric finishes.
l Dark or noncolorfast l Less fading and dye bleeding.
colors l Reduces wrinkling.
l Moderately soiled perma-
nent press
l Nylons, polyesters,
acrylics, silks, woolens
l Knits and delicate fabrics
l Prewash, soak
COLD
70”-90°F
(21’-32°C)
COLD l Very lightly soiled items
l Moderately soiled items if
extra detergent is added
l Extra sensitive colors
(noncolorfast)
l Rinsing, for all fabrics
l Saves hot water.
l Less effective cleaning than hot or
warm water.
l Use longest wash time in cycle
selected.
l Use liquid detergent, or dissolve
powdered detergent in warm water
before adding to cold wash water.
l Pretreat spots, stains and heavy or
greasy soils.
To check your hot water temperature wlth a
candy or cooktng thermometer:
1. Fill a pan with the hottest water available
from the faucet that will fill your washer.
Water hardness
Many poor washing results can be traced to
wash-water hardness. To check your water
hardness:
2. Place a candy or cooking thermometer in
water to check the temperature.
If you do not have a faucet at your wash site,
l City water-ask your city water company.
l Well water-call your Cooperative Extension
Service.
collect water from the faucet closest to your
washer.
NOTE: In wash-water temperatures colder
than 70°F (21%):
Ask for the mineral content in grains-per-gallon
or parts-per-million. If your water is 9 or more
grains-per-gallon or more than 153 parts-per-
million:
l Detergents do not dissolve well. l Consider installing a water softener.
l Soils are difficult to remove. l Use more detergent.
l Some fabrics will retain wear wrinkles and l Use a packaged water conditioner.
may have increased pilling. l Do not use soap.
16

Using laundry aids
Follow package instructions when using laundry l If the recommended amount of normal
aids. (See ‘Removing Stains” on pages 13-l 5, for sudsing detergent creates too many suds or
more information.)
Chlorine bleach
l Use bleach dispenser if your machine has
one. (See page 11.)
l If your washer does not have a bleach
dispenser:
1. Let the washer fill and begin agitating the
load.
2. Measure bleach. Never use more than
1 cup (250 mL) for a full load. Dilute
measured bleach in 1 quart (1L) of water.
3. Add bleach to wash cycle so it can be
removed in the rinse cycle. Pour bleach
around agitator, not directly on load.
l Follow directions on care labels. Do not use
chlorine bleach on wool, silk, spar&x,
acetates or some flame-retardant fabrics.
l When soaking with chlorine bleach, add
detergent to soak water.
NOTE: Undiluted bleach will damage any fabric
it touches. The damage appears as rips, holes,
tears or color loss and may not show up until
several washings later.
All-fabric bleach
l Powdered or liquid all-fabric bleach may be
used on all types of fabrics.
l Do not use all-fabric bleach in the bleach
dispenser because it may clog.
Detergent
l Using too little detergent is a common cause
of laundry problems. Follow manufacturer’s
directions. Measure accurately, especially
when using ultra detergents. Package
directions are usually based on:
-moderate water hardness (4-6 grains)
-lightly soiled items
-normal mix loads.
l Use more detergent for:
-hard water
eoler wash water
-full loads
-heavily soiled items.
l Do not judge the amount of detergent to use
by the amount of suds in the machine. Low
sudsing detergents do not create as many
suds as normal sudsing detergents.
suds are present in the rinse water, try a low
sudsing detergent.
Fabric softeners
l Use fabric softener dispenser if your machine
has one.
l If your washer does not have a fabric
softener dispenser, add diluted fabric
softener only in the final rinse.
l Always dilute fabric softeners with l/z to 1 cup
(125 to 250 mL) warm water. Undiluted fabric
softener can stain fabrics.
l Fabric softeners should not be mixed with
other laundry products because greasy
stains may form. If stains form, remove by
wetting the stain and rubbing with liquid
detergent or a bar of soap. Rewash the
stained item.
l Too much fabric softener can make some
items (diapers and towels) nonabsorbent. If
this happens, use less fabric softener or do
not use it every time.
Flro or Exphxhn Hazard
l Store flammable solvents or liquids away
from your washer.
l Dry cleaning solvents or fluids should not
be put directly into your washer.
l Items treated with solvents should be
rinsed and air dried before washing in
your washer.
The fumes from these substances can
create a fire hazard or explosion.
Personal InJury Hazard
l Never use chlorine bleach with ammonia
or acids. Hazardous fumes can form.
l Keep stain removal products out of the
reach of children ... preferably in a locked
cabinet.
17

are included in this section.
Blankats, electric Pretreat spots and stains. Select water temperature, cycle, and time
and woolen according to the type of blanket being washed. Two rinses may be
necessary. If manufacturer recommends machine washing:
1. Measure blanket before washing.
2. Add mild detergent to washer. Fill and agitate briefly to dissolve
detergent.
3. Stop washer. Load blanket evenly around agitator. Soak 10 to
15 minutes.
4. Set Cycle Control Knob to Drain and Spin. Start washer. Spin 1 to
2 minutes.
5. Fill washer for final rinse. Stop washer. Allow to soak.
6. Set Cycle Control Knob to Drain and Spin. Start washer. Allow washer
to finish cycle.
7. Lay blanket on flat surface and block by gently stretching to original
measurement. Woolens tend to shrink more the first time they are
washed. This is normal.
Curtains, drapes, Wash small loads. Crowding will cause wrinkling.
slipcovers 1. Shake or vacuum to remove loose dirt.
2. Wash following manufacturer’s instructions.
NOTE:
l Sun-damaged curtains and draperies will tear whether hand or machine
washed.
l Replace slipcovers while still slightly damp. They will dry to fit tightly.
Diapers When using chlorine bleach for soaking, add detergent to load. Avoid
overuse of fabric softeners. Absorbency will be reduced.
1. Rinse immediately. Soak in a solution of lukewarm water and a small
amount of detergent until you are ready to wash them. You may wish to
use bleach or a special soaking product when soaking.
2. Spin excess water from diapers before washing.
3. Wash diapers as you would wash white cottons and linens.
Elastic, spandex Elastic picks up oil from the body. Oil can damage elastic. Wash often to
help reduce the damage. Use warm water and sufficient detergent to
remove oils.
Flamwatardant Items will be clearly labeled as flame-retardant. Follow manufacturer’s
clothing instructions to retain flame retardant qualities.
18

Fiberglass
materials
Knits
Do not wash fiberglass materials in your washer. Glass particles
could stick to the next load and cause skin irritation.
Knits are comfortable to wear because they stretch. However,
this means that knits are more likely to be stretched and
damaged when washed (especially bulky knits). Knits made of
synthetic fabrics such as polyester, nylon, and acrylic tend to
keep their original shape more than a knit made of cotton or
ramie.
1. Close zippers, fasten hooks and eyes to prevent snagging.
2. Wash small loads to reduce pilling and lint.
Pillows, stuffed
toys Washing feather pillows is not recommended unless they are
dryer dried.
1. Add detergent, then partially fill washer with water; agitate
until detergent is dissolved.
2. Place two pillows on opposite sides of the agitator to balance
the load.
3. Allow washer to fill completely and continue through the
cycle.
4. Stop the washer occasionally to press air from item(s) being
washed.
Plastic, rubber
Item8
Quilts, bedspmads
Treat as delicate items. Wash in warm water. Wash small items
in a mesh bag.
Do not wash cotton-filled comforters unless they are quilted or
stitched; tucked cotton batting tends to slip and become lumpy.
Scatter rugs 1. Shake or vacuum to remove loose dirt.
2. Wash more than one small rug at a time. If you wash only
one rug, add bath towels to balance the load. A larger rug
should be distributed around the agitator to balance the load.
Snowsuits, jackets,
&C.
1. Wash only one or two items at a time. Load evenly around
the agitator.
2. Stop the washer occasionally to press air from item(s) being
washed.
3. Two rinses may be necessary.
19

Solving laundering problems
Most laundering problems are easily solved if you understand the cause. Check the following
list for problems you may have and possible causes. If you need additional help, check the
“Assistance or Service” section of this book.
PROBLEM
Brown, yellow
l taino
CAUSE
l Chlorine staining
l Iron in water heater or pipes
l Iron and manganese in water
Dye tran8fer l Improper sorting
l Load not immediately removed from washer after end of cycle
Gray whites,
dingy colon l Improper sorting
l Water temperature too low
l Not enough detergent
l Using soap in very hard water (use detergent if you have hard water)
Greasy looking
rpot8 l Undiluted fabric softener or fabric softener poured directly on load l Fabric softener in wash water
l Not enough detergent
Lint l Improper sorting
l Paper or tissue in pockets
l Pilling being mistaken for lint
l Overloading
l Not enough detergent
l Clogged lint filter (models with a manual clean lint filter)
Load too wet
after spin
Shrinking
l Cold rinses
l Lid is opened before spinning is completed
l Fabric type (some knits stretch during manufacturing-laundering returns
fabric to original size)
l Care label directions not followed
Snagr, ripr, holes l Items damaged before washing
l Misuse of chlorine bleach
l Sharp articles not removed from pockets
l Overloading
l Fasteners not fastened
Stfff, rough fabrica l Using soap in very hard water (use detergent if you have hard water)
(u8ually cottons) l Not enough detergent
l Line drying
Twieting, tangling l Overloading
l Improper loading (do not wrap large items around agitator)
Wrinkling l Overloading
l Load not immediately removed from washer after end of cycle
l Improper rinse temperature
l Cycle selection is incorrect (based on fabric type)
Yellow arena l Water temperature too low
(from body oils) l Not enough detergent
20