Whirlpool WFC7500V Series User manual

DC
30" min.
(76.2 cm)
26" min.
(66 cm)
30" min.
(76.2 cm)
AB
3" (7.6 cm)
12" (30.5 cm)
23.4"
(59.5 cm)
3" (7.6 cm)
1" (2.5 cm) 1"
†
(2.5 cm)
1"
†
(2.5 cm)
48 in.
2
*
(310 cm
2
)
24 in.
2
*
(155 cm
2
)
7" (17.8 cm)
9"
(22.9 cm)
7" (17.8 cm)
4"
(10.2 cm)
20.7"
(52.5 cm)
23.4"
(59.5 cm)
1"
(2.5 cm)
1"
(2.5 cm)
1"
(2.5 cm)
36.2
(92 cm)
23.4"
(59.5 cm)
"
32.9"
(83.5 cm)
20.1"
(51cm)
A. Side view - closet or confined area
B. Closet door with vents
A. Recessed area
B. Side view - closet or confined area
34"
(86.4 cm)
AB
3"
(7.6 cm)
3"
(7.6 cm)
1"
(2.5 cm) 4"
(10.2 cm)
20.1"
(51.0 cm)
48 in.
2
(310 cm
2
)
24 in.
2
(155 cm
2
)
1"
(2.5 cm)
20.1"
(51.0 cm)
1"
(2.5 cm)
1"
(2.5 cm)
23.4"
(59.5 cm)
4"
(10.2 cm)
18" min.
(45.7 cm)
BA
®
Front Loading Washer
PRODUCT MODEL NUMBERS OVERALL DIMENSIONS
DRAIN SYSTEM OPTIONS
WFC7500V
Electrical: 120-volt, 60 Hz, AC-only,
15- or 20-amp, fused electrical supply. A time-
delay fuse or circuit breaker and separate circuit is
recommended.
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10175588
3-31-08
RECOMMENDED INSTALLATION SPACING FOR
CUSTOM UNDERCOUNTER INSTALLATION
Washer on Pedestal
Dimensions shown are the recommended spacing.
Standpipe drain system - wall or floor (view A & B)
The standpipe drain requires a minimum diameter standpipe of 2"(5 cm). The
minimum carry-away capacity can be no less than 17 gal. (64 L) per minute.
The top of the standpipe must be at least
30"(76.2 cm) high and no higher
than 96" (2.4 m) from the
bottom of the washer.
Laundry tub drain system (view A)
The laundry tub needs a minimum
20 gal. (76 L) capacity. The top of
the laundry tub must be at least
30"(76.2 cm) above the floor.
Floor drain system (view B)
The floor drain system requires a siphon break
that may be purchased separately.
The siphon break must be a minimum of 28"
(71 cm) from the bottom of the washer.
Additional hoses might be needed.
RECOMMENDED INSTALLATION SPACING FOR RECESSED OR
CLOSET INSTALLATIONS, WITH OR WITHOUT A PEDESTAL
Dimensions shown are the recommended spacing.
*Min. top and
bottom air
openings for
closet door.
**External exhaust
elbow requires
additional space.
†Wall, door and floor
molding may
require additional
spacing.
1"
(2.5 cm)
1"
(2.5 cm)
32.9" min.
(83.5 cm)
23.4"
(59.5 cm)
2" (5 cm)
RECOMMENDED INSTALLATION
SPACING FOR CABINET INSTALLATION
For cabinet installation, with a door, the minimum ventilation
openings in the top are required.
RECOMMENDED INSTALLATION SPACING FOR RECESSED OR
CLOSET INSTALLATION, WITH STACKED WASHER AND DRYER
Dimensions shown are the recommended spacing.