Whirlwind Perfect Ten User manual

10 band graphic EQ
Bass ten
10 band graphic EQ
P e r f e c t T E N
Ten Band Graphic EQs
10 band EQ manuals.indd 1 1/27/11 11:11 AM

10 band graphic EQ
P e r f e c t T E N
1: INPUT JACK - Connect an electric guitar, acoustic guitar, keyboard or bass here.
2: OUTPUT JACK - Connect a cord out to your amplier here.
3: 18 VOLT INPUT - Connect a 3.5 mm 18 Volt DC regulated supply, 100 mA capacity or greater with a center
negative plug. The Whirlwind PS118EFX (included) is recommended for proper operation.
4: ON/OFF FOOTSWITCH - Engages and disengages the EQ eect. When engaged, the LED above the footswitch
will illuminate and the fader LEDs will increase in brightness.
5: FREQUENCY FADERS - Each fader is marked with the center frequency that is controlled by that fader. Lower
numbers represent bass like tones while higher numbers represent more treble like tones. When the fader is
positioned at the center detent, that frequency is not being boosted or cut, it is “at”. Raising the fader above the
detent position increases the level for that frequency while lowering the fader below the detent position reduces
that frequency’s level. The range of each fader is +/- 15 dB for the Bass Ten and +/- 12 dB for the Perfect Ten.
6: VOLUME FADER - Controls the over all volume of the output. The center detent is “unity gain”, there is no volume
boost or cut except for slight increase or decrease in volume due to boosting or cutting with the frequency faders.
Raising/lowering the volume control provides a up to +/- 15 dB boost for the Bass Ten and +/- 12 dB for the Perfect Ten.
Unlike most graphic EQ eects, these circuits are designed to be “Constant Q”, meaning that the width of
frequencies on either side of the center frequency that are aected by the fader remains constant, regardless of
how much that frequency is boosted or cut. This provides a more intuitive fader interface, giving you superior control when
shaping your sound.
Refer to the accompanying diagrams for some suggested settings or run each fader from center to top to bottom
while listening to your instrument to explore the wide range of adjustments possible.
+-
3
5
2
118 VDC
100 mA
20 40 80 160 320 600 900 1.3 1.8 3K VOL.
15
10
15
10
5
0
5
-
-
-
+
+
+
4
10 band graphic EQ
Bass ten
10 band graphic EQ
P e r f e c t T E N
Funk Bass
10 band graphic EQ
Bass ten
Dub Bass
10 band graphic EQ
Bass ten
Acoustic Full Range
10 band graphic EQ
P e r f e c t T E N
Acoustic High Pass
10 band graphic EQ
P e r f e c t T E N
Metal Mid Scoop
10 band graphic EQ
P e r f e c t T E N
VOL
6
10 band graphic EQ
P e r f e c t T E N
10 band EQ manuals.indd 2-3 1/27/11 11:11 AM

www.whirlwindusa.com • 800-733-9473
Warranty:
This product is warranted to be free of defects in materials
or workmanship to the original purchaser for a period of 2
years from the date of purchase. Should warranty service
be required, return the unit postage paid along with the
original sales receipt to:
Whirlwind Music Dist., Inc.
99 Ling Road
Rochester NY 14612
Whirlwind will, at its option, repair or replace the unit.
This warranty does not cover damage resulting from
abuse, unauthorized modications or use of the product in
unintended applications.
HAND MADE IN THE USA
10 band EQ manuals.indd 4 1/27/11 11:12 AM