Whittier Wood 1149GBCH User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 11/13
Model #
1149GBCH
Cascade
2-Drawer Bench
Glazed Black Cherry finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
IMPORTANT NOTES:
For normal household use only. Not recommended to use this product
in a commercial setting.
Do not climb or stand on or in this piece of furniture.
Do not overload the drawers.
Unload items before you move this unit.
Before you load or move this unit, tighten all screws and supports.
Before you begin your project, completely read the Assembly
Instructions.
Store this item: 1- in its box; 2- in a dry place; 3- in temperatures that
range from 40°F to 90°F (not on a cold and possibly damp cement
floor).
Periodically inspect your furniture for any loose glue joints, screws or
any other problem that might affect the stability of your furniture.
Tighten or repair as needed.
This assembly requires two people.
WARNING
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm. California Health and Safety Code
Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, contact Whittier Wood Products customer service
department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the furniture model number (upper
portion of this page), the part letter, production code,
quantity needed, reason for replacement and your full
name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery
800-653-3336 •Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

1149GBCH Cascade 2-Drawer Bench
Parts List
1149GBCH —Page 2 —11/13
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter(s) and part name.
Part
Description
Quantity
A
Case Assembly
1
B
Upholstered Seat
1
C
Drawer Box (inserted)
2
D
Drawer Face (installed)
2
E
Pull (attached)
2
F
#8 x 1-1/4" Machine Screw (installed)
4
G
Drawer Slides (pre-installed sets)
2
H
#6 x 1/2" Philtruss Screw (inserted)
12
I
#6 x 3/4" Philtruss Screw (inserted)
12
J
Insert Nut (inserted)
4
K
Adjustable Glide (installed)
4
L
#8 x 7/8" Lo-Profile Screw (inserted)
12
M M
#8 x 1-1/4" Pan Head Screw
9
(3 inserted)

1149GBCH Cascade 2-Drawer Bench
Assembly Instructions
1149GBCH —Page 3 —11/13
Tool Required: Phillips Screwdriver
1. This unit was shipped with the seat placed into its recessed position but not attached with
screws. This allows for easy removal if you wish to customize the upholstery on your seat. To
reupholster the seat we suggest you seek professional advice.
2. To attach your seat, remove the drawers, noting where each drawer came from to ensure
correct reinstallation. To remove the drawers, push up on the left Drawer Release Lever while
pushing down on the right Drawer Release Lever (see Figures 2a and 2b). Place the unit upside
down. Using the predrilled holes as guides, attach the Seat (B) with the six #8 X 1-1/4” Pan
Head screws (M) as shown in Figures 2 and 2C. Turn the unit upright and install the drawers.
Fig. 1
B
M
x 6
Fig. 2
M
M
M
B
Drawer Release Lever
Fig. 2a
Fig. 2b
Fig. 2c

1149GBCH Cascade 2-Drawer Bench
Assembly Instructions
1149GBCH —Page 4 —11/13
3. Place the bench at its final destination. Rotate the Adjustable Glides (K) on the bottoms of the
legs until the unit is level. See Figure 3.
Please note: Our upholstered seat is covered in Bonded Leather. To clean it, simply use a soft cloth,
mild soap and water. DO NOT use alcohol based cleaning agents.
K
Fig. 3
K