Whynter ARC-1030WN User manual

ARC-1230WN/ARC-1230WNH

IMPORTANT NOTE:
Read this manual carefully before installing
or operating your new air conditioning
unit. Make sure to save this manual for
future reference.
Explanation of symbols displayed on the unit(For the unit adopts R32/R290 Refrigerant only):
WARNING
CAUTION
CAUTION
CAUTION
This symbol shows that this appliance used a flammable refrigerant. If the refrigerant
is leaked and exposed to an external ignition source, there is a risk of fire.
This symbol shows that the operation manual should be read carefully.
This symbol shows that a service personnel should be handling this equipment
with reference to the installation manual.
This symbol shows that information is available such as the operating manual or
installation manual.
Caution: Risk of fire/
flammable materials
(Required for R32/R290 units only)

ARC-1230WNH)
ARC-1230WNH
- -
Pump hose port (for
ARC-1230WNH only)

42.5 / 49.5 / 56.5 47.2 / 52.6 / 56.8
ARC-1230WN ARC-1230WNH

The �mer on/off indicator light
Press and hold on TIMER buon for 3 seconds to cancel ming funcon.
ARC-1230WNH

ARC-1230WNH

ARC-1230WNH

-
Page
16
Gravity
C. Heat pump drainage (for ARC-1230WNH only)
This unit has a condensate pump feature that can pump out (and up) water
through the included drain hose for continuous water removal during HEAT
Mode. Remove the heat pump drain plug from the back of the unit and install
the drain hose. Place the open end of the hose to a drain area.
NOTE: The condensate pump will only engage during Heat mode and will not
work in any other modes. Pump drain hose is required to be installed when
using the portable air conditioner in Heat Mode.
C
O
OO