VermiHut Stackable Worm Bin
User Manual
Your New Worm Bin
The worms and bedding in your worm bin have been
taken from one of WiggleRoom’s commercial bins in
Bridgeport. This ensures there is no transplant shock
for the worms. They should continue to thrive in their
new home surrounded by familiar bedding and food.
Observe the moisture and density of the material
around the worms. This is the ideal state to keep your
worms; 70% moisture with plenty of air.
Starting out
You have 3 bins as part of your stackable system.
•2 Bottom Bins, empty
•Top Bin: This now holds worms and food.
Continue to add food to this bin. When it is 2/3 full
remove one of the bottom bins and add some of the
bedding and worms from the feeding bin. Add this bin
on top. All new food will be added to this new level.
Worms will migrate up through the holes in the bin.
Once this bin reaches 2/3 full add the 3rd bin.
Fill this bin 2/3 full.
By this point the bottom bin should contain finished
worm castings. All worms will have migrated up to the
feeding bin. Harvest these castings and add this bin to
top as your feeding bin.
Repeat to ensure a constant supply of fresh worm
castings and a healthy worm population.
Maintenance and Feeding
•Every 4-7 days add a mixture of ground up or
decaying vegetative food scraps, cornmeal,
steal cut oats, coffee grounds, shredded paper,
thermophilic compost, leaves, etc.
•Maintain 50-70% moisture. If too wet, add
shredded paper or other dry inputs.