Williams-Sonoma PEN-T-1025/700LEDCM User manual

ASSEMBLY INSTRUCTIONS
• Assemble the tree stand by pulling apart the legs of the stand so that they are X-shaped. Match the hole of the
eyebolt through the hole in the stand, making sure it
does not protrude into the center of the stand so that the tree trunk can be inserted easily into the stand. (See
Figure A1 and A2)
Helpful Tip:
realign the flange and stand holes to avoid stripping the eye bolt or cracking the flange.
•
(See Figure B)
•
Helpful Tip:
look.
•
(See Figure C1 to C3)
Helpful Tip:
• FOR PRELIT TREES: As you are assembling the tree, Connect the plug(s) securely to the extension cord(s) as per the
color labels indicated in Figure D and plug the adapter connected with green labeled extension cord into the wall outlet.
or missing bulbs. Replace bulbs promptly in order to maintain the performance and life expectancy of your pre-lit tree.
•
•
C1
A1 A2 B
C2 C3
•
over the years.
need to be replaced
Assembly

D
ITEM #: PEN-T-1025/700LEDCM
3
4
2
1
Adapter
To Be Plugged
Into Wall
Outlet
(For Indoor Use Only)
17 Was
Input: 120V 60Hz 0.36A
Output: 29V DC 0.6A
Insert Red Label
Plugs Into Red
Labeled Extension Cord
CAUTION:
1.To reduce the risk of fire and electric shock:
a) Use only the power supply that was provided with this product;
b) Do not install on trees having needles, leaves or branch covering of metal or materials which look like metal;
c) Do not mount or support strings in a manner that can cut or damage wire insulation.
2. Use only the adapter supplied with this product. Using a different adapter will damage the lights and may cause fire, or electrical shock hazards.
3. Keep out of reach of pets and children.
4. FOR INDOOR USE ONLY.
Insert Yellow Label
Plugs Into Yellow
Labeled Extension Cord
Control box
E
branches to fill any gaps and ensure lights are well-spaced.If your tree looks like the one in
Figure E ,
you did NOT properly shape the tree.
Figure E
with no work done at the center and middle.
• Ensure all plugs are properly connected and adaptor is plugged into the wall outlet
If lights in certain areas of the tree are notlit:
• Ensure bulbs are securely fastened into bases.
• Ensure there are no broken bulbs.
• Verify all wires are intact.
store tree in adamp area orin an area where the temperature exceeds 100° F.
Tree Storage
•
• Gently replace the tree in its box and tape itshut. Do not
•
When not in use, store neatly in a cool, dry location protected from sunlight.
Unplug extension cord with adaptor from the wall outlet and then disconnect light extension cord between each secon of the tree.
er
Light
Controll
Selector
HOW TO USE THE DUAL COLOR LIGHT CONTROLLER :
“ Dual Color Light Controller” to
select among: (1) CLEAR-MULTI: FADING; (2) CLEAR: FADING;
(3) CLEAR-MULTI: ALTERNATING; (4) CLEAR: STEADY;
(5) CLEAR-MULTI: SLOW FADING; (6) MULTI: STEADY;
(7) MULTI: FADING (8) COMBINATION.