WilTec 30286 User manual

User’s manual
Rotary Painting Stand
30286
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.

© by WilTec Wildanger Technik GmbH Item 30286 Page 2
http://www.WilTec.de
http://www.aoyue.eu 01 2022-1
http://www.teichtip.de
The information contained in this document may alter at any time without prior notice. No part of this
document may be copied or otherwise duplicated without prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-
ual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating
manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler Germany
Do you wish to collect your goods? Our address for collection is:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
In order to shorten the waiting time and to allow for an easy on-site processing, we kindly ask you to
contact us briefly beforehand or to place your order via the webshop.
E-mail: [e-mail]
Tel: [phone]
Fax: [phone]
To return your goods for exchange, repair, or other purposes, please use the following address. Atten-
tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team
before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
E-mail: [e-mail]
Tel: [phone]
Fax: [phone]

© by WilTec Wildanger Technik GmbH Item 30286 Page 3
http://www.WilTec.de
http://www.aoyue.eu 01 2022-1
http://www.teichtip.de
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
•Do not use the stand when parts are damaged.
•Do not climb or step onto the stand.
•Never allow children and non-authorised persons to use the stand.
•Do not use the stand near sources of current.
•Always remove paint and varnish rests from all moving or adjustable components to ensure the
stability and the long service life of the stand.
•Keep an eye on your surroundings while using the device.
•Do not use the device when being tired or under the influence of alcohol, drugs, or medicine.
•Only use the stand in a clean, tidy, and safe zone. Make sure that the stand stands on a flat and
stable surface.
•Before using the stand, make sure that the floor is neither wet nor slippery. Wear non-slip shoes.
•Always wear suitable work clothing. Avoid wearing wide clothes and jewellery and securely tie
long hair together.
•Some components, due to the design of the stand, could be sharp-edged. It is therefore strongly
recommended that your wear protective gloves.
•The stand must not be used in a way that might impair its stability and integrity and that might
endanger the user. Improper use might lead to property damage and personal injury.
•Store the stand in a safe and dry zone.
•During work, always wear appropriate protective equipment. The stand has moving parts that
could lead to your fingers being contused or loose parts of your clothes being caught.

© by WilTec Wildanger Technik GmbH Item 30286 Page 4
http://www.WilTec.de
http://www.aoyue.eu 01 2022-1
http://www.teichtip.de
Exploded view and parts list
№
Name
Qty.
№
Name
Qty.
1
Stand bar
1
16
Handle
1
2
Extension bar to stand bar
1
17
Screw M8×75
1
3
Front bar
1
18
Plastic bushing
2
4
Rear bar
1
19
Screw M8×45
10
5
Lower bar
1
20
Hex bolt M8×40
2
6
Wheel bar
1
21
Nut M8
13
7
Wheel
2
22
Washer 8
14
8
Arm
4
23
Washer 16
2
9
Support arm
2
24
Locking pin
2
10
Lockable wheel
1
25
Fixing
1
11
Front shackle
1
26
Ring washer
2
12
Front spring
1
27
Pin to front shackle
1
13
Pedals
1
28
Footrest
1
14
Tap
6
29
Hook
2
15
Knob
6
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.