Winegard Ds-2000 User manual

Antenna Discharge Unit

(NEC Section 810-21)

Ground Clamps

Grounding Conductors

(NEC Section 810-21)

Power Service Grounding

Electrode System

(NEC Art. 250, Part N)

Ground Clamp

Electrical

Service

Equipment

(4) 1/4-20 Flanged

Hex Nuts

(2) Mast Clamps

Fits pipe/towers of 1"

to 2" in diameter.

HOW TO PROVIDE LIGHTNING

PROTECTION

FOR TV ANTENNA AND SET

STEP 1. Mount the lightning arres-

tor as close as possible to where the

downlead enters the house.

STEP 2. The ground wires for both

the mast and the downlead should

be copper or aluminum wire, number

eight (8) or larger.

STEP 3. The downlead wire from

the antenna to the lightning arrestor

should be secured every four (4) to

six (6) feet to prevent whipping.

NOTE: In the case of a "ground up"

antenna installation, it may not be

necessary to ground the mast if the

mast extends four or more feet into

the ground. Consult a TV service-

man for proper depth in your location.

Adjust mount pipe

for correct angle.

Winegard Company

3000 Kirkwood St., Burlington, IA 52601-2000

Printed in U.S.A. © Winegard Company 1997 2451723 Rev. 11/01

WINEGARD

Pipe/Tower Mounting Kit

Models DS-2000/2002

Antenna

Lead-in Wire

WARNING

INSTALLATION OF ANTENNAS NEAR POWER LINES IS DANGEROUS.

FOR YOUR SAFETY, FOLLOW THE INSTALLATION INSTRUCTIONS.

INSTRUCTIONS

STEP 1. Assemble kit as

shown.

STEP 2. Tighten U-bolts,

do not overtighten and

bend pipe/tower.

STEP 3. Adjust mount pipe

for correct angle.

STEP 4. Tighten bolts

holding pipe. Do not over-

tighten and bend pipe.

90 DAY LIMITED WARRANTY

Winegard Company warrants this Winegard product against any defects in materials or

workmanship within 90 (ninety) days from date of purchase. No warranty claim will be honored unless

at the time the claim is made, you present proof of purchase to an authorized Winegard dealer (if

unknown, please contact Winegard Company, 3000 Kirkwood Street, Burlington, IA 52601-2000,

Telephone 800-288-8094).

Winegard Company (at its option) will either repair or replace the defective product at no charge

to you. This warranty covers parts, but does not cover any costs incurred in removal, shipping

or reinstallation of the product. This limited warranty does not apply if the product is damaged,

deteriorates, malfunctions or fails from: misuse, improper installation, abuse, neglect, accident,

tampering, modication of the product as originally manufactured by Winegard, usage not in

accordance with product instructions or acts of nature such as damage caused by wind, lightning,

ice or corrosive environments such as salt spray and acid rain.

The 90 Day Warranty is provided on the condition that the equipment is properly delivered with all

handling and freight charges prepaid to your Winegard dealer for return to our factory for repair or

replacement. Winegard dealers will arrange for the replacement or repair and return to you without

charge the product which failed due to defective material or workmanship.

WINEGARD COMPANYWILLNOTASSUMEANY LIABILITIES FORANY OTHER WARRANTIES,

EXPRESS OR IMPLIED, MADE BY ANY OTHER PERSON.

ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING

WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY ARE

LIMITED TO THE 90-DAY PERIOD OF THIS WARRANTY.

The foregoing shall be the sole and exclusive remedy of any person, whether in contract, tort or

otherwise, and Winegard shall not be liable for incidental or consequential damage or commercial

loss, or from any other loss or damage except as set forth above.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of

limitation of incidental or consequential damages, so the above limitations or exclusions may not

apply to you.

This warranty gives you specic legal rights and you may also have other rights which vary from

state to state.

Rev. 2/08

* NOTICE: If you require a longer

U-bolt (4.00") order part # 1160322.

(2) U-Bolts*