Winnebago Minnie Winnie Spirit Assembly instructions

DVD PLAYER
–If Equipped
The player is connected directly to the
TV with a composite video cable (red,
yellow, white) or HDMI cable.
Set TV Video Input
• Turn TV and DVD player ON.
• Press the SOURCE button on the TVor
the remote to select “VIDEO” input.
• The TVscreen will display
the DVD player logo when
thecorrectinputisselected.
Play DVD
• Press “OPEN/CLOSE” on DVD player
to open tray.
• Insert a DVD “face up” on to tray and
press “OPEN/CLOSE” to close tray.
• The DVD will begin to load
automatically. The TV screen will
typically display “Reading” or
“Loading”.
• The DVD may load directly to the
main title/menu screen or it may
begintoplaypreviews.Youmaybeable
to skip previews if desired by pressing
the chapter “advance” button on the
DVD remote until you see the main
menu screen.
• When the main menu screen appears,
usethearrowbuttonsontheDVDplayer
remote to select the desired entry or
press the “+” or PLAY buttons on the
DVDplayerremote(or“Play”buttonon
DVD player) to begin playing the
feature.
• Volume is adjusted with the DVD
remote or TV remote.
Further Information
See the manufacturer’s quick reference
guide provided in your InfoCase for
complete feature descriptions and operating
instructions.

Audio-Video System
Basic Operation
Guide
Part No. 161501-20-002
Rev. 2001181217
Copyright 2018 Winnebago Industries, Inc.
All rights reserved.
NOTE: See your InfoCase for specific
operating guides for audio and
video components.