Winnebago Grand Tour Assembly instructions

SOUND BAR SYSTEM
–If Equipped
The Sound Bar System operates from
120-volt AC household current only, so you
must have either the shoreline connected,
the generator running, or the inverter turned
on (if equipped). The TV is connected to the
Sound Bar.
TV Sound through the Sound Bar
When watching TV programs
(broadcast, cable, or satellite), the TV
normally plays sound through its own built-
in stereo speakers. To connect TV sound
output to the Sound Bar for a richer sound
quality, follow these steps:
• Turn “ON” the TV and Sound Bar.
• Select the TV channel you wish to
watch.
• Press the “Source” button on the Sound
Bar remote until the display reads
“D.IN”.
• Turn Sound Bar volume up or down.
Listen to Music stored on a Bluetooth
device
• Press the “Source” button on the top
panel of the Sound Bar or on the Sound
Bar remote until display reads “BT”.
• On your Bluetooth device, perform the
pairing operation. A list of devices
foundwillappearonyourdevice.Select
the Sound Bar.
• Enter the PIN code 0000 (if required).
• When the devices are paired, the Sound
Bar will display the device name.
• Turn the Sound Bar volume up or down.
Lounge TV with Sound Bar System
• Turn on TV and ensure TV source is set
toHDMIby pressingthesource orinput
button on the TV remote.
• Turnonthesoundbarandsettheinputto
optical.
• Volume is controlled by the sound bar
remote.
NOTE: TV will operate without using the
sound bar if desired.
Bedroom TV with Sound Bar System
• Turn on TV and ensure TV source is set
toHDMIby pressingthesource orinput
button on the TV remote.
• Turnonthesoundbarandsettheinputto
optical.
• Volume is controlled by the sound bar
remote.
NOTE: TV will operate without using the
sound bar if desired.
Exterior TV with Sound Bar System
• Turn on TV and ensure TV source is set
toHDMIby pressingthesource orinput
button on the TV remote.
• Turnonthesoundbarandsettheinputto
optical.
• Volume is controlled by the sound bar
remote.
NOTE: TV will operate without using the
sound bar if desired.
Turning TV Speakers On/Off
TV speakers can be turned off to prevent
an echo effect when using an external
speaker (sound bar). Every TV is slightly
different, refer to the TV manufacturer’s
user guide provided in your InfoCase for
detailedinstructionsonturningTVspeakers
off.
Further Information
See the manufacturer’s user guide
provided in your InfoCase for complete
feature descriptions and operating
instructions.
BOSE® SOUND BAR
SYSTEM
–If Equipped
The Sound Bar System operates from
120-volt AC household current only, so you
must have either the shoreline connected,
the generator running, or the inverter turned
on (if equipped). The TV is connected to the
Sound Bar.
Lounge TV with Sound Bar System
To calibrate Sound Bar
(if not previously calibrated)
NOTE: You will only need to calibrate your
system one time.
1. Turn “ON” the TV and Sound Bar.
2. Place the ADAPTiQ headset on your
head making sure the left and right
sensors rest above your ears.
3. Connect the ADAPTiQ headset into the
portlocatedonthebackofthesoundbar.
4. Press the sound touch button on the
remote control. Then press and hold “8”
on the remote control until the TV
indicator and bluetooth indicator
illuminate green.
5. Follow the on-screen instructions given
to you by the system. Continued—

Audio-Video System
Basic Operation
Guide
Part No. 161501-18-018
Rev. 1801170821
Copyright 2017 Winnebago Industries, Inc.
All rights reserved.
NOTE: See your InfoCase for specific
operating guides for audio and
video components.
6. When calibration is complete, remove
the ADAPTiQ headset.
Video Source from HDMI Matrix
The audio and video signal from the
HDMI matrix is received by the sound bar
and then sent to the TV. Power on the
sound bar and TV in order to enjoy the
desired video source from the HDMI
matrix.
• Press HDMI 1 button on the sound bar
remote.
• Verify TV source is set to HDMI by
pressing source or input button on the
TV remote.
• Volume is controlled by the sound bar
remote.
Video Source from TV (broadcast or
cable)
• Press source or input button on TV
remote and select “Air” or “Cable”.
•Press “TV Input” button on
sound bar remote.
• Volume is controlled by the sound bar
remote.
Listen to Music stored on a Bluetooth
device
• PresstheBluetoothbuttononthe
sound bar remote.
• On your Bluetooth device, perform the
pairing operation. A list of devices
found will appear on your device.
Select the Sound Bar.
• Enter the PIN code 0000 (if required).
• When the devicesarepaired, the Sound
Bar will display the device name.
• TurntheSoundBarvolume up or down.
Bedroom TV with Sound Bar System
• Turn onTV and ensure TVsource is set
toHDMIbypressingthesourceorinput
button on the TV remote.
• Turn on the sound bar and set the input
to optical.
• Volume is controlled by the sound bar
remote.
NOTE: TV will operate without using the
sound bar if desired.
Exterior TV with Sound Bar System
• Turn onTV and ensure TVsource is set
toHDMIbypressingthesourceorinput
button on the TV remote.
• Turn on the sound bar and set the input
to optical.
• Volume is controlled by the sound bar
remote.
NOTE: TV will operate without using the
sound bar if desired.
Turning TV Speakers On/Off
TV speakers can be turned off to
prevent an echo effect when using an
external speaker (sound bar). Every TV is
slightly different, refer to the TV
manufacturer’s user guide provided in your
InfoCase for detailed instructions on
turning TV speakers off.
Further Information
See the manufacturer’s user guide
provided in your InfoCase for complete
feature descriptions and operating
instructions.