Wisenet SND-L6012 User manual

SND-L6012
NETWORK CAMERA
Quick Guide

2_ English
WHAT’S INCLUDED
NETWORK
ACT LINK
FRONT
NETWORK
ACT LINK
FRONT
Camera CD Quick Guide (Optional) Warranty card (Optional)
Template Tapping Screw
NETWORK WIRING DIAGRAM
Camera
Camera
Local PC
Broadband
Router
PPPoE or
Cable Modem
PPPoE or
Cable Modem External Remote PC
DDNS Server
(Data Center, KOREA)
INTERNET

English _3
MANUAL NETWORK SETUP
Run <IP Installer_v2.XX.exe> to display the camera search list.
At the initial startup, both [Auto Set] and [Manual Set] will be grayed out.
M
`For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this
function.
aSelect a camera in the search list.
bClick [Manual Set].
The Manual Setting dialog appears.
cIn the <Address> pane, provide the necessary
information.
dIn the <Port> pane, provide necessary
information.
•HTTP Port : Used to access the camera
using the Internet browser, defaulted to 80.
•VNP Port : Used to control the video signal
transfer, defaulted to 4520.
eEnter the password.
The default password is “4321”.
J
`In the IP installer, you can use the initial password,
“4321” to set IP Address, Subnet Mask, Gateway,
HTTP Port, VNP Port, IP type. After changing the
network interface, for better security, access the
web viewer and change the password.
`
If you want to set the password, refer to “Password setting”.
fClick [OK].
Manual network setup will be completed.
CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC
1. Run the IP Installer.
It will scan for connected cameras and display them as a list.
2. Double-click a camera to access.
The Internet browser starts and connects to the camera.
M
`Access to the camera can also be gained by typing the camera’s IP address in the address bar of the Internet
browser.
b
a
d
c
e
f

4_ English
PASSWORD SETTING
When you access the product for the first time, you must
register the login password.
When the “Password change” window appears, enter
the new password.
J
`For a new password with 8 to 9 digits, you must
use at least 3 of the following: uppercase/lowercase
letters, numbers and special characters. For a
password with 10 to 15 digits, you must use at
least 2 types of those mentioned.
-Special characters that are allowed. :
~`!@#$%^*()_-+=|{}[].?/
`For higher security, you are not recommended to repeat the same characters or consecutive keyboard inputs for your
passwords.
`If you lost your password, you can press the [RESET] button to initialize the product. So, don’t lose your password by
using a memo pad or memorizing it.
LOGIN
Whenever you access the camera, the login window appears.
Enter the User ID and password to access the camera.
aEnter “admin” in the <User Name> input box.
bEnter the password in the <Password> input
field.
cClick [OK]. a
c
b

English _5
INSTALLING WebViewer PLUGIN
If connecting to a camera for the first time, you will see the installation message. Then, install the required
WebViewer Plugin to access the camera and control the video from it in real time.
M
`If the plug-in installation file download status is suspended at 99% in the Internet Explorer browser, retry it after
selecting “Release SmartScreen filter” in “Tool SmartScreen filter”.
`In your internet explorer, if you need to move to the installation screen after installing the webviewer plugin, check
whether webviewer_activexplugin_lib.control in the “Tool Additional Function Management” menu is “Activated”. If
not, and if there is a persisting problem, then select “Tools Internet Options General” and delete all the search
records.
CONNECTING TO THE CAMERA FROM A REMOTE PC VIA THE
INTERNET
Since using the IP Installer on a remote computer that is not in the Broadband Router’s network cluster is not
allowed, users can access cameras within a Broadband Router’s network by using the camera’s DDNS URL.
Port Range Forward (Port Mapping) Setup
aFrom the Setup menu of the Broadband
Router, select <Applications & Gaming> -
<Port Range Forward>.
bSelect <TCP> and <UDP Port> for each
connected camera to the Broadband Router.
Each port number for the Broadband Router
should match that specified in <Setup> -
<Basic> - <IP & Port> from the camera’s web
viewer menu.
cWhen done, click [Save Settings].
Your settings will be saved.
a
b
c

6_ English
M
`Above sample instructions are based on the CISCO’s Broadband Router.
`The settings may differ depending on the connected Broadband Router model.
For more information, refer to the user manual of the applicable router.
`Port forwarding can be done without additional router setup if the router supports the UPnP (Universal Plug and Play)
function.
After connecting the network camera, set <Quick connect> of <Wisenet DDNS> to <On> in the “Setup 
Network DDNS” menu.
Registering with DDNS
1. Visit the Wisenet DDNS web site (http://ddns.hanwha-security.com) and sign in with a registered
account.
2. From the top menu bar, select <DDNS SERVICE> - <MY DDNS>.
3. Click [PRODUCT REGISTRATION].
4. Please enter the product ID and fill in the items displayed.
5. Click [REGISTRATION].
Connecting the camera to Wisenet DDNS
1. On the Live screen of the camera, click [Setup ( )].
2. Select <Network ( )>.
3. Click <DDNS>.
4. From the DDNS setup page, set <DDNS> to <Wisenet DDNS>.
5. Provide the <Product ID> that you registered product ID with the DDNS site.
6. Click [Apply ( )].
When the connection is successfully made, you will see the message of <(Success)> on the screen.

Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these
substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them
through your local, free battery return system.
Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to
provide customers with more environmentally friendly products.
The Eco mark represents Hanwha Techwin’s devotion to creating environmentally friendly products, and
indicates that the product satisfies the EU RoHS Directive.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of
their working life. To prevent possible harm to the environment or human health from uncontrolled waste
disposal, please separate these items from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Head Oce
6, Pangyo-ro 319 beon-gil, Bundang-gu, Seongnam-si,
Gyeonggi-do, 463-400 Rep. of KOREA
Tel : [phone] Fax : [phone]
http://hanwha-security.com
Hanwha Techwin America
500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666
Toll Free : +1.877.213.1222 Direct : +1.201.325.6920
Fax : [phone]
www.hanwhasecurity.com
Hanwha Techwin Europe
Heriot House, Heriot Road, Chertsey, Surrey, KT16 9DT, United Kingdom
Tel : [phone] Fax : [phone]
www.hanwha-security.eu
Hanwha Techwin(Tianjin) Co.Ltd
No.11, Weiliu Rd., Micro-Electronic Industrial Park, Jingang Road Tianjin 300385, China
Tel : [phone]
www.hanwha-security.cn
Hanwha Techwin Middle East FZE
JAFZA View 18, 20th oor, oce 2001, 2002, 2003, Downtown Jebel Ali,
Dubai, United Arab Emirates
http://hanwha-security.com