Wiseup WIFI23 User manual

WIFI23
User Guide
I
. Product Overview
1
. Camera Lens
2
. Indicator Light
3
. Reset Button
4
. Micro SD Card Slot
II. What’s In the Box
-Mini CD Disc
-Card Reader
-WIFI AC Adapter Camera
III. Network Setup
3.1. Install the P2PLiveCam APP
Search for the P2PLiveCam APP in Google Play Store or Apple Store and install it on your
smartphone or tablet PC.

(Android) (IOS)
3
.2. P2P or LAN Mode Setup
3
.2.1. Power on the camera by plugging it into an outlet power socket.
[
Note]:
1
). The indicator light will illuminate blue for 5 seconds and go out. 30 seconds later, it will blink red and blue slowly
,
i
ndicating the camera has entered into the P2P (LAN) mode.
2
). Unplug the camera to power it off.
3
.2.2. Go to the WIFI or WLAN Settings page on your smartphone or tablet PC, connect your device t
o
t
he camera’s WIFI signal. The camera’s WIFI network SSID starts with CM******** and it will appear o
n
y
our WIFI or WLAN Settings page as below:

(Android) (IOS)
[
Note]:
1
). It will take 1-3 minutes before the camera’s WIFI signal is found by your smartphone or tablet PC.
2
). If the camera’s WIFI signal cannot be found on your smartphone or tablet PC, please reset the camera (See VII)
a
nd then try it again.
3
.2.3. Launch the P2PLiveCam APP. Tap the +> Add new online Device (Camera) >Search (LAN
)
>
the camera icon > OK.

(Android)

(IOS)
3
.2.4. The camera is added successfully if you see it is Online. Tap the camera icon to watch liv
e
v
ideo in the P2P (LAN) mode.

(Android)
(IOS)

[Note]: See the table below for an explanation of the different functions available:
Button Function Name Function Description
Audio Tap this button to enable or disable the live
audio output.
Microphone Tap Audio and Microphone to record audio
during the remote video recording process.
Snapshot
Tap this button to take a screenshot of the live
video. The pictures will be saved in your
smartphone or tablet PC.
Remote video
recording
Tap this button to start or stop remote video
recording.
Horizontal Mirror Tap this button to flip the live video’s picture
horizontally.
Vertical Mirror Tap this button to flip the live video’s picture
vertically.
Brightness Tap this button to adjust the live video
brightness.
Contrast Tap this button to adjust the live video contrast
ratio.
3.3. WAN Mode or Remote View Setup
>> Before the WAN configuration, please confirm that the camera is added successfully to
smartphone or tablet PC, and that the P2P (LAN) connection between the camera and smartphone or
tablet PC works well.
3.3.1. Launch the P2PLiveCam APP.
3.3.2. In the P2P (LAN) mode, tap the setting icon > Advance Config or Device Settings > WIFI
Config.

(Android)
(IOS)

3
.3.3. Enroll the camera in a desired WIFI network and then tap OK to confirm the configuration.
(Android)
(IOS)

C
heck if the WAN mode or remote view setup works!
1
. Exit the P2PLiveCam APP.
2
. Go to the WIFI or WLAN Settings Page on you smartphone or tablet PC, join to another WIFI signa
l
w
hich must be different from the current one or you can use your mobile network.
(Android) (IOS)
3
. Launch the P2PLiveCam APP again. If you see the camera is Online, it means that the remot
e
v
iew (WAN) setting is successful.

(Android)
(IOS)

I
V. Motion Detection Setup
>
> Please make sure a Micro SD card is securely fitted into the SD card slot on your camera. A SDH
C
C
lass 10 Micro SD card is recommended.
4
.1. In the WAN or LAN mode, launch the P2PLiveCam APP.
4
.2. Tap the setting icon > Advance Config or Device Settings > Alarm Config.
(Android)
(IOS)

4
.3. Enable the motion detection function and then tap OK to confirm the setting. The camera will tak
e
a
picture automatically when a movement is detected.
(Android)
(IOS)

4
.4. Go back to the camera list page, tap Alarm at the bottom of the screen to check the photos.
(Android) (IOS)
4
.5. Go to the Advance Config or Device Settings page and select SDCard Record Config. Choos
e
R
ecord When Alarms or On alarm and set other desired parameters. Then tap OK to confirm th
e
s
etting. The camera will start recording video automatically when a movement is detected.

(Android)
(IOS)
4
.6. Go back to the camera list page, tap Record at the bottom of the screen and choose Remote S
D
C
ard to check motion detection video files.

[
Note]: All the video files will be saved in the micro SD card on your camera.
(Android)
(IOS)

V
. Record Video to Your Smartphone or Tablet PC
5
.1. In the LAN or WAN mode, launch the P2PLiveCam APP. Tap the camera icon to the live vide
o
s
creen.
5
.2. Tap the remote video recording button to start or stop recording video.
[
Note]: All the video files will be saved in the flash memory or extended Micro SD card of your smartphone or table
t
P
C.
(Android) (IOS)
5
.3. Go back to the camera list, tap Record at the bottom of the screen and choose Local to access
t
he videos files.

(Android)
(IOS)

[
Note]:
1
). Before recording, make sure that there is enough memory in the smartphone or tablet PC to save the video files.
2
). Video Resolutions: 640P, 720P, 1080P Optional Video Format: ASF
V
I. Record Video to a Remote Micro SD Card
>
> Please make sure the Micro SD card is securely fitted into the SD card slot on your camera.
A
S
DHC Class10 Micro SD card is recommended.
6
.1. Launch the P2PLiveCam APP.
6
.2. Tap the setting icon > Advance Config or Device Settings.
(Android) (IOS)
6
.3. Tap SDCard Record Config, choose a recording mode and set other desired parameters, then
t
ap OK to confirm the setting.

(Android)
(IOS)
6
.4. Go back to the camera list page, tap Record at the bottom of the screen and choose Remote S
D
C
ard to check the video files.