Wisoee Js2712a User manual

1. Dual Alarm Clock, FM Radio, Bluetooth Speaker2. 6 buttons: MODE、SET、PREV/V-、PLAY、NEXT/V+. LIGHT/SN3. 4-Digit time display: hour, minute; 12/24 hour format.4. 3 brightness levels of display screen can be changed by pressing "LIGHT" button repeatedly (HI/LOW/OFF).5. Press “MODE” button, the function menu order is TF (skip to the nextfunction if there is no card) Bluetooth FM radio Clock.6. Long battery life and power saving: built-in 2000mah lithium battery.7. Sliding switch: turn on/oﬀ the display (on the back side).8. Charging the clock via USB cable（The charger plug is not included inthe package, it only come with a USB cable). OPERATOPNS:FUNCTION:For the ﬁrst use, it is recommended to fully charge the battery. Whencharging, the indicator light turns red to indicate that it is charging, andwhen charging, the indicator light turns blue to indicate it is fully charged.1. Push the switch to on. 2. The product has a display and needs to be reset to the correct time.CHARGING/BATTERY CAPACITY INDICATION:When the battery level of the product is lower than 20%, a low batteryindicator will appear on the display, please charge it.When the battery level of the product is lower than 10%, it only displaytime, and other functions can not work until connected to an externalpower source.RESTORE THE FACTORY SETTING:If the product does not respond correctly during setting and display, canuse the RESET button whose hole is same as the AUX hole to restart.Time Setting:1. In any mode(except FM mode), hold “SET” button, “12 Hr” or “24Hr ”appears on the display.2. Use the - / + buttons to toggle between 12 and 24 hour mode.3. Press “SET” button. The hour digit ﬂashes on the display.4. Use the - / + buttons to set the current hour (hold the - / + buttons forfast adjust).5.Press “SET” button. The minute digit ﬂashes on the display.6. Use the - / + buttons to set the current minute (hold the - / + buttons forfast adjust).SETTING THE TIME:During alarm clock ringing, there are now several options: Press "LIGHT/SNOOZE" button The alarm sound will stop playing, after10 minutes it will sound again(snooze icon will ﬂash). This procedure canbe repeated multiple times. During snooze interval without ringing(snooze icon is ﬂashing), press "LIGHT/SNOOZE" button again, the snooze function will be turned oﬀ. The alarm symbol continues to remain visible on the display, and it will be woken at thesame time on the next day. Wait 1 minute, The alarm sound stops automatically. The alarmsymbol continues to remain visible on the display, and it will be woken atthe same time on the next day. When the alarm sounds is BEBE, press any button except “LIGHT/SNOOZE” to stop ringing. If no button press, the alarm will automaticallystop ringing after one minute.When alarm sound is radio sound, press any button except “LIGHT/SNOOZE” to stop ringing .If no button press, the alarm will automaticallystop ringing after 30 minutes.Under AL1 or AL2 time display (":" not blink), if no button press for 30seconds , it will automatically return to time display (":" keep blinking) FM Setting:Alarm Setting:1.In any mode (except FM mode), press “SET” button and select to display AL1 or AL 2 time.2. Under AL 1 setting mode, AL 1 icon will appear on the display. Hold “SET”button and the hour will ﬂash, use - / + buttons to set the hou（rhold the - / +buttons for fast adjust）. 3. Press “SET” button. The minutes will ﬂash. Use - / + buttons to set theminutes(hold the - / + buttons for fast adjust).4. Press“SET” button and “ON” or "OFF" will display, use - / + buttons toselect alarm “ON” or “OFF”.5. Press” SET” button and “bu” will appear on the display, use - / + buttonsto select alarm sound “bu”(BEBE) or “ rd”(FM radio).6. After setting, hold "SET" button or if without press any button, it will alsoautomatically save and exit the setting mode after 30 seconds.NOTE: For the setting steps of alarm 2, please refer to alarm 1.7. After setting, hold "SET" button or if without press any button, it willalso automatically save and exit the setting mode after 30 seconds.1. Under FM radio mode, press “PLAY” button to enter automatic channelselection and store radio stations.2. Under FM radio mode, press “+” and “-” button to switch radio station,hold“+” and “-” button to adjust volume .(Warm Tips : For the ﬁrst use, please scan all the channel automatically ,then it return back to the ﬁrst channel and start to play. )Bluetooth Function:1.Enter bluetooth mode with a prompt tone and bluetooth icon will ﬂash.2. Activate the bluetooth function on your mobile device to pair(bluetoothname: BT SPEAKER).3. Once there is connection with a prompt tone, the bluetooth icon will besolid.4. Press "PREV / V-" button, it will automatically go to the previous song.5. Press the "NEXT / V+ " button to automatically go to the next song .6. During music play, hold “+” and “-” button to adjust volume.7. Press “ PLAY” button to pause and repress to continue to play.Warm tips: If a phone call is received with reporting the phone number, press “PLAY”button to answer the call, press again to hang up; Hold“PLAY” button to reject the call. Double press “PLAY” quickly to call back.Mp3 Function:1. Enter TF mode, or in any mode, insert TF card/U disk, it will enter TFmode, TF indicator light will be on, Bluetooth is disconnected, Bluetoothsound is turned oﬀ.2.Pull out the TF card/U disk, it will automatically enter the Bluetoothmode.Without be paired, it will automatically exit Bluetooth mode to enterclock mode.456