WisyCom CSA121 Series User manual

Wisycom Srl
Via Tiepolo, 7/E
35019 Tombolo (PD) – Italy
[phone]
Fax. [phone]
WisycomUSA.com
[e-mail]
Wisycom USA
5228 Eisenhower Avenue
Alexandria, Virginia 22304
+1 (888) WISYCOM
[phone]
Subject to change without notice
CSA121X PASSIVE WIDEBAND SPLITTER COMBINERS
• DC-coupled for use with antenna
booster/ active antennas.
• Handles up to 1.5 Amps without
saturation for high power IP3
booster driving (i.e. Wisycom BAW)
• Supplied with 230/110 Vac power
supply with locking connector
CSA121A
• Works with input power up to 2W
• DC pass-through for antenna
booster powering
CSA121B
• Works with high input power – up to
3W
• Becomes a smart combiner when
used with Wisycom MTK952N
(2WO) Transmitter
• Recovers combiner loss as
MTK952N increases output power
as needed
Note: the CSA121T does not have booster
pass-through capabilities
CSA121T
Frequency range: 470 - 870 MHz
Splitter/Combiner loss: 4dB
Max Input power: 125mW (CSA121A)
2W (CSA121B)
3W (CSA121T)
Connector: 3 BNC-F
Impedance: 50 Ω
Power supply: 230/110 Vac (CSA121A)
Max current thru port: 1.5A (CSA121A)
Material: aluminum
Finishing: black varnish
Mounting: mounting plate holes (M5 screw type)
Dimensions: 20 x 100 x 125 mm (HxWxD)
Weight: 170 g (CSA121A), 220g (CSA121B), 235g (CSA121T)
TECH SPECS
The CSA121 series of compact, passive wideband splitter / combiners is designed to function as:
• PASSIVE WIDEBAND COMBINER →1 x 2:1
• PASSIVE WIDEBAND SPLITTER →1 x 1:2
Each available model has unique, differentiating functions:
Combining instructions: Use [1] & [2] for input signals. Combined signals are available at [C].
Splitter instructions: Use [C] for input signal. Split signal is available at [1] & [2].

Wisycom Srl
Via Tiepolo, 7/E
35019 Tombolo (PD) – Italy
[phone]
Fax. [phone]
WisycomUSA.com
[e-mail]
Wisycom USA
5228 Eisenhower Avenue
Alexandria, Virginia 22304
+1 (888) WISYCOM
[phone]
Subject to change without notice
CSA121X PASSIVE WIDEBAND SPLITTER COMBINERS
Example: CSA121B in combiner conguration with high power transmitters
Example: CSA121A in combiner conguration with high-current boosters
Example: CSA121B in splitter conguration with DC pass through
Example: CSA121T in combiner conguration with high power transmitters
LBN2MTK952 CSA121B
LFAMRK980 CSA121B
LBN2MTK952N CSA121T
LFAMRK980 CSA121B
Connecting CSA121T, MTK952N automatically recovers the combiner loss increasing the output power of the transmitter.
LFAAGN00 CSA121A
To Receiver