Wizard Toto User manual

Instructions manual
Ozone generator
Toto model

2
Index
1. Introduction ...............................................................................
1.1. Operating principle .......................................................................................
1.2. Manufacturer ..................................................................................................
2. Product operation ..................................................................
2.1. Manual operation .........................................................................................
3. Machine components ...........................................................
3.1. Button panel......................................................................................................
3.3 Air circulation ..................................................................................................
3.4 Ozone generator.............................................................................................
3.5 Ozone gauge sensor ...................................................................................
4. Maintenance .............................................................................
5. Product applications .............................................................
6.Safety recommendations.
indications and warnings .........................................................
s ..........................................................................................
3
3
3
4
5
5
8
8
8
8
9
9
10
10
11
11
11
11
6. Safety recommendations.
Indications and warnings
This ozone generator reaches levels above 100 µg / m3 (0.05 ppm), which is
the maximum value recommended by the WHO and therefore, according to
the UNE 400-201-94 standard, it is considered Type C.
It cannot be used in the presence of people, animals and / or living
beings. if the entrance is necessary where generators of this type are
in operation, it must be carried out observing the adequate protective
measures against irritating gases.
The device should be used in a controlled way minimizing the risk of
exposure. The vehicle or rooms where the generator has been used will be
accessible under normal conditions once it indicates that the ozonation +
oxygenation cycle has ended (programs 1, 2, 3 or 4, times in section 2.1). The
disinfected area must be properly ventilated before use.
Always use this device connected to a protected electrical line with a
differential of at least 30 mA.
6.2. General warnings
Do not use in rooms where volatile chemicals are handled. ozone may react
on contact with other chemicals.
Ozone is irritating at higher levels than those indicated in this manual.
do not apply on unpackaged foods.
MAT20201003

3
1.1 Operating principle
types of microorganisms. It is the most active form of oxygen, capable
of deactivating viruses, bacteria, parasites, fungi, molds, spores and
acts at a lower concentration and with a shorter contact time than other
disinfectants.
The use of ozone for air disinfection is much more recommended than
the use of other disinfectants, apart from its effectiveness and its rapid
the most ecological and sustainable disinfection.
This ozone generator uses a high-frequency system to turn the surrounding
oxygen molecules into ozone by micro-discharge. Once the ozone is
1.2 Manufacturer
Ozone generator manufactured by LEMAR LEBEN GROUP S.L.
Contact address:
Pol. Industrial nº2 – C/ En proyecto, s/n
Teléfono ([phone]
www.lemarleben.com
10
4.MAINTENANCE
Clean the device with non-abrasive products. Always with a
damp cloth, never with a spray bottle, to prevent the electronic
components from getting wet and causing internal short circuits.
Do not force the equipment and follow the instructions in the
manual to work safely.
Do not pull the main wire to disconnect the device. It is
recommended to inspect it periodically and change it in case of
deterioration.
Unplug the device when not in use or when cleaning.
Any damaged part should only be replaced by the manufacturer. If
the device is disassembled or shows manipulation signs without the
consent of the manufacturer, the product warranty will be lost.
The ozone gauge sensor should be replaced after 5 years of use.
To do this, consult the manufacturer.
The ozone generator should be replaced after 5 years of use.
To do this, consult the manufacturer.
5. Product applications
This ozone generator is useful for the disinfection of viruses and bacteria and
the elimination of odors from all types of vehicles (cars, vans, buses, etc.) and
rooms up to 80m2.
Suitable for hospitals, clinics, laboratories, residences, shops, restaurants,
coffee shops, hotels, spas, beauty centers, hairdressers, gyms and sports
centers.
5
5

4
Ozone output Flow
Ozone generator Treated zone
Voltage +- 10% Weight
Power Dimensions
10g/h
Corona discharge 0-80m2
AC220v 50Hz 9kg
150w440x310x310mm
2250l/min
Estandard programs:
Cars
Pr.1 – 6min
Vans
Pr.2 – 10min
Rooms up to 30m2
Pr.3 – 105min
Rooms up to 80m2
Pr.4 – 225min
- Programs type: ozone + oxygenation cycle
- App programming by volume: Calculation according to the space to be
disinfected
to use the room again in a completely safe way.
-Operation light sign.
have been found.
9
RUN
1 2 3 4
PROG
3.4 Ozone generator
The ozone generator used provides an ozone output of 10 g/h and works by
corona effect. Ozone is produced from an electrical discharge, commonly
known as a spark. The spark splits the oxygen molecule (O2) found in
ambient air into elemental oxygen (O). These oxygen atoms quickly bond
with another oxygen molecule (O2) to form ozone (O3).
In a corona discharge ozone generator, the electrical discharge takes place
molecule and produce ozone. In this air gap, a dielectric is used to distribute
to the largest volume of oxygen possible.
3.5 Ozone gauge sensor
This ozone generator has an ozone gauge sensor that can measure the
amount of this gas throughout the process. When access to the vehicle or
disinfected room is safe, it will be indicated with the BLUE LED.
The disinfected area must be properly ventilated before use.

5
2. Product operation
2.1. Manual operation
Connect the machine to the electrical current
connection cable. Preferably place in the center of the cabin or room to be
disinfected.
Press the power switch. The device will do an internal test for a few seconds.
Select the desired program pushing the Program button (consult section 3.1).
Push the Run button to start the operating cycle (consult section 3.1).
The ozonation process will start 10 seconds later. This security time is used
Be careful, ozone generator cannot be used in the presence
of people or animals.
8
RUN
1 2 3 4
PROG
3. Machine components
3.1 Button panel
ozone molecules (O3) once the disinfection process has been completed, to
3.3 Air circulation
ozonization and oxygenation processes.
Led indicators for the
selected program
Program start
button
Program selection button

6
Program 1
car disinfection.
Cycle time: 6 minutes.
To achieve maximum disinfection effectiveness, the vehicle's air
conditioning must be used at half power throughout the cycle.
Program 2
vans and campers disinfection.
Cycle time: 10 minutes.
To achieve maximum disinfection effectiveness, the vehicle's air
conditioning must be used at half power throughout the cycle.
todo el ciclo.
7
Program 3
rooms up to 30 m2, calculated with a height of 3 m.
Cycle time: 105 minutes.
Air out the room after disinfection.
Program 4
rooms up to 80 m2, calculated with a height of 3 m.
Cycle time: 225 minutes.
Air out the room after disinfection.
Program error
will remain in RED to indicate the error. Turn off and on the device to
restart the process. If you notice a strong ozone odor, air out the room
immediately.
If the error persists, consult the manufacturer.