Wolf WGBL134S User manual

USE & CARE GUIDE
840285500

2
WOLF GOURMET BLENDER
Welcome
Thank you for your purchase of this Wolf Gourmet product. We look
forward to being part of your kitchen for years to come. Wolf is a third-
generation family-owned company that has a personal stake in the
preparation of your food. With family ownership comes a great attention
to detail and an uncompromised dedication to creating exceptional
products. Wolf built its business and reputation on helping home cooks
achieve the best results possible. With Wolf Gourmet’s precise control,
the dish you envision will be the dish you serve.
Register Your Product
We strongly encourage you to register your Wolf Gourmet blender jar. It’s
important to us that you get the most out of your products. By registering you
will:
• Become a Wolf Gourmet culinary insider.
• Have ongoing support from Wolf Gourmet.
• Be alerted to any service updates.
• Receive occasional emails to help you maintain and enjoy your cutlery.
To register, visit wolfgourmet.com/registration.
For a Use and Care Guide for the Wolf Gourmet Blender, visit
wolfgourmet.com.

3
SAFETY PRECAUTIONS
IMPORTANT SAFEGUARDS
When using appliances, basic safety precautions should always be followed, including the following:
• Read all instructions.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory, or mental capabilities, or lack of experience and knowledge, unless they are closely
supervised and instructed concerning use of the appliance by a person responsible for their
safety.
• Close supervision is necessary when any appliance is used by or near children. Children should
be supervised to ensure that they do not play with the appliance.
• To protect against risk of electrical shock, do not put cord, plug, base, or motor in water or other
liquid.
• Unplug cord from outlet when not in use, before putting on or taking off parts, and before
cleaning.
• Avoid contact with moving parts.
• Do not operate any appliance with a damaged supply cord or plug, or after the appliance
malfunctions or has been dropped or damaged in any manner. Supply cord replacement and
repairs must be conducted by the manufacturer, its service agent, or similarly qualied persons
in order to avoid a hazard. Call the provided customer service number for information on
examination, repair, or adjustment.
• The use of attachments, including canning jars, not recommended or sold by the appliance
manufacturer may cause a risk of injury to persons.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter or touch hot surfaces, including stove.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Keep hands and utensils out of the jar and away from the cutting blade, while blending or
chopping food, to reduce the risk of severe personal injury and/or damage to the blender or
available attachments (attachments may not be provided with blender). A rubber spatula may be
used but must be used only when blender is not running.
• Blades are sharp; handle carefully—especially when assembling, disassembling, or cleaning
inside blender jar.
• Do not use a broken, chipped, or cracked blender jar.
• Do not use broken, cracked, or loose cutting blade assembly.
• Always operate blender with lid and emulsion cap assembly in place. Remove emulsion cap
assembly only for adding ingredients or to insert the tamper.
• When blending hot liquids or ingredients, remove center emulsion cap assembly from the lid.
Use caution: spray or excess steaming may cause scalding and burns. Do not exceed the 2-cup
(473-ml) level. Always begin processing on lowest speed. Keep hands and other exposed skin
from the lid opening to prevent possible burns.
• Ensure cutter assembly is tight and secure to jar. Injury can result if moving blades accidentally
become exposed.
• If the jar should twist or rotate when the motor is switched ON, switch OFF (O) immediately and
tighten jar in collar or on blender base.
• Do not leave blender unattended while it is operating.
• Before plugging cord into wall outlet, turn off the appliance. To disconnect cord, turn the control
to OFF (O). Then remove plug from wall outlet.
• Do not use appliance for other than intended purpose.
SAVE THESE INSTRUCTIONS

4
1b
3
PARTS AND FEATURES
1a Filler Cap
1b Emulsion Cup
2Lid
3Blender Jar (32 ounces or 1 L)
4Cutting Blade Assembly
1a
2
4
WOLF GOURMET BLENDER PARTS AND FEATURES
This jar is intended for use only with the
Wolf Gourmet blender type B82.

5
Parts and Features
1. Emulsion Cap Assembly: The two-piece cap has a filler cap inside an emulsion cup.
The filler cap has markings for easy measuring, while the emulsion cup is used to
make fine dressings and marinades. When both parts are removed, ingredients can be
added or the tamper may be inserted into the lid.
2. Lid: The lid fits securely into blender jar and can be easily removed by lifting the logo
tab. To keep the spout of the pitcher mess-free, place logo tab above the handle of the
pitcher.
3. Blender Jar: The durable jar is clearly marked with ounces, cups, and milliliters. Your
jar was made of a special co-polyester material selected for its weight, durability, and
glass-like clarity. For care and cleaning of the jar, see page 8. Only use the blender jar
on the Wolf Gourmet Blender.
4. Cutting Blade Assembly: The cutting blade assembly is permanently installed in the
blender jar.
Preparing the Blender Jar
After unpacking, wash in hot, soapy water.
Dry thoroughly. Care should be taken when
handling cutting blade assembly since it is
very sharp. Refer to care recommendations
on page 8.
IMPORTANT: Blender jar and cutting
blade assembly are subject to wear
during normal use. Always inspect jar for
nicks, chips, or cracks. Always inspect
cutting blade assembly for broken,
cracked, or loose blades. If jar or cutting
blade assembly is damaged, do not use.
Call our customer care center to obtain
replacement parts.
WARNING
Burn Hazard
Metal parts under blending jar get hot after
use. Do not touch.
WARNING
Burn Hazard
When blending hot liquids, avoid contact with spray or steam by:
• Always removing Emulsion Cap Assembly.
• Always beginning blending on the lowest speed.
• Never exceeding the 2-cup (473-ml) level.
• Always keeping hands and other exposed skin away from the lid opening.

GENERAL
• For best performance, the minimum amount of liquid needed per recipe is one cup
(8 ounces/237 ml).
• For thick smoothies or purees that are not blending well, incorporating a small amount
of additional liquid may be all that is necessary to improve the results. Start by adding
a ¼ cup (59 ml).
• To add foods when blender is operating, remove emulsion cap assembly and add
ingredients through the opening.
• Do not store food or liquids in the blender jar.
• Avoid bumping or dropping the blender when in operation or at any time.
• Cutting large whole fruits and vegetables may allow them to blend more quickly.
• Do not fill blender jar past highest graduation marking.
• Blender jar material is susceptible to impacts with hard ingredients, such as nuts, seeds,
grains, and kernels, which may result in minor impact marks or the appearance of being
cloudy. These are aesthetic issues and will not affect future blending performance.
• If blending action stops during blending or ingredients stick to sides of the jar, insert
tamper to help move the mixture around or add more liquid to the blender jar.
USING THE TAMPER:
• Tamper is included with full-size blender and can be used with this blender jar.
• When blending very thick or frozen mixtures, such as peanut butter or sorbet, air
pockets may occasionally form due to the high speed of the blades, which can
cause ingredients to stop blending. This is called cavitation. If cavitation occurs, use
the tamper to push the ingredients towards the blade. The tamper is designed to
fit perfectly inside the opening in the jar’s lid so it may be used while the blender is
running. It will not touch the blade. ONLY use the tamper with the jar lid in place.
1. Remove emulsion cap assembly. Insert tamper through hole in blender lid.
2. Blender jar should not be more than two-thirds full when the tamper is used during
blending.
3. Do not use tamper with hot liquids.
4. If needed to help ingredients circulate, point the tamper toward the sides or corners
of the container. Do not try to force the tamper deeper into the container and closer
to the blades.
PREVENTING OVERLOADING:
• Do not process recipes at lower speeds or higher speeds than recommended.
• Do not process recipes longer than recommended.
BLENDER TIPS
6

7
CLEANING
Base, Control
Panel, Cord
Wipe with a damp cloth or sponge. Do not use abrasive or corrosive cleaners.
Blender Jar HAND WASH ONLY. Alternative is to ll jar halfway with water and add 2–3
drops of dish soap. Blend for 30 seconds. Rinse and dry thoroughly.
For a more thorough cleaning, sprinkle ¼ cup (59 ml) baking soda in blender.
Add 1/2 cup (118 ml) white vinegar. Mixture will bubble. When bubbling
subsides, add 1 cup (237 ml) water and blend on the SOUP cycle. Wash any
remaining residue with dish soap and water. Rinse and dry thoroughly.
Blender Lid,
Emulsion Cap
Assembly,
Tamper, Jar Pad
These items can be washed in a dishwasher. DO NOT use the “SANI” setting
when washing in the dishwasher. “SANI” cycle temperatures could damage
product. Parts may also be washed with hot, soapy water. Care should be
taken when handling the cutting blade assembly since it is very sharp. Rinse
and dry thoroughly.
Care Recommendations
BEFORE CLEANING
1. Unplug cord.
2. Lift blender jar assembly off the base.
3. Remove emulsion cap assembly and lid.
WARNING
Electrical Shock Hazard
Disconnect power before cleaning. Do not
immerse cord, plug, base, or motor in water
or other liquid.
Recommendations:
• To maintain the aesthetic characteristics
of the blender jar, carefully wash and dry
immediately after every use.
• Use of a soft brush, like a baby
bottle brush, and dish detergent are
recommended for removal of tough
oils or stubborn ingredients from the
jar and may be helpful in cleaning
beneath the jar blades.
• Use a dish towel or soft cloth for
drying.
• If the jar does not appear clean after
the rst wash, repeat.
• Avoid the use of abrasive or rough
cleaners, scouring pads, brushes,
and steel wool since they will cause
scratches during the cleaning process.
• Soaking your jar in vinegar or a 10%
bleach solution (up to 8 hrs) may be
helpful in removing some stains or signs
of cloudiness.

Wolf, Wolf & Design, Wolf Gourmet, W & Design and the color red as applied to knobs are registered trademarks and
service marks of Wolf Appliance, Inc. Sub-Zero, Sub-Zero & Design, Dual Refrigeration, The Living Kitchen, Great American
Kitchens, The Fine Art of Kitchen Design, and Ingredients are registered trademarks and service marks of Sub-Zero, Inc. All
other trademarks or registered trademarks are property of their respective owners in the United States and other countries.
Troubleshooting
There is grease around the bottom of the blender jar or on the counter top.
• Monitor the problem and source. This may indicate an issue with the jar bearings.
• Call our customer care center if the condition persists.
Blender jar is cloudy or stained. How can I clean it?
• Some cloudiness may be natural after use. Minerals from fruits, produce, and leafy
greens, in addition to the oils of various nut butters, can sometimes cause a lm on the
blender jar.
• Sprinkle 1/4 cup (59 ml) baking soda in blender. Add 1/2 cup (118 ml) white vinegar.
Mixture will bubble. When bubbling subsides, add 1 cup (237 ml) water and blend on
the SOUP cycle. Wash any remaining residue with dish soap and water. Rinse and dry
thoroughly.
840285500 8/2017