WolfVision Cynap PRO User manual

Cynap PRO
Quick Start Guide
R
Driving Knowledge Creation
www.wolfvision.com

Introduction
Cynap PRO by WolfVision® delivers an all-in-one collaboration and presentation solution,
featuring BYOD, streaming to vSolution Cynap systems, web conferencing, and a document
and media player, with support for up to 4K UHD resolution.
Hardware Connection
Make all necessary connections according to the following illustration.
Plug in the power cord as the last step.
Power on the equipment.
vSolution Cynap PRO by WolfVision
Typical Setup
4 simultaneous
BYOD wireless devices
Cloud services
USB drive, UVC camera
Touch display,
app, web browser,
HDMI LANUSB Audio
Touch display
2x HDMI device
IP-Streams
MATRIX
Networked AV solutions
Network drives
Web browser Printed in Austria - February 2022
Color key
HDMI Out
MATRIX
Networked AV solutions
Audio out
Zoom, Teams,
WebRTC
web conferencing

Operating for the first time
Connect and Control
When the Cynap system is switched on, all settings can be configured in the password-
protected settings section of the graphical user interface (GUI). Access the GUI by using a web
browser on your connected PC or tablet (input the IP address), by using the optional remote
control, or by using a connected USB mouse and keyboard.
Push the button on the right-hand edge to open the Control center and click on the
cogwheel.
Initial default admin password:
Initial SSID of built-in Access Point:
Initial default password of built-in Access Point:
Check the integrated Help Guide for further details.
Password
model name + serial number of the unit
serial number of the unit (8 digits)
Cynap PRO
Setup

Miracast on Windows 8.1+ (Wireless Display)
1. Press + K to list local Miracast receivers.
2. Select your Cynap system from the list.
3. Activate User Input Back Channel on the Windows device to allow touch
back control of it via Cynap system connected touch screen.
Miracast on Android
1. Swipe down to Open Quick Settings.
2. Select Miracast (aka: Screen Mirroring, Cast, Smart View, AllShare).
3. Select your Cynap system from the list.
AirPlay on MacBook, iMac
1. Ensure that you are in the same network as your Cynap system.
(e.g. by scanning the on-screen QR-code, or connecting manually)
2. Click in the menu bar at the top of your screen.
3. Select your Cynap system from the list.
AirPlay on iPhone / iPad
1. Ensure that you are in the same network as your Cynap system.
(e.g. by scanning the on-screen QR-code, or connecting manually)
2. Swipe down to open Control Center and tap on Screen Mirroring.
3. Select your Cynap system from the list.
Chromecast on Chromebrowser
1. Ensure that you are in the same network as your Cynap system.
(e.g. by scanning the on-screen QR-code, or connecting manually)
2. Open your Chrome browser, start Cast and select the source content.
4. Select your Cynap system from the list.
Chromecast on Android
1. Ensure that you are in the same network as your Cynap system.
(e.g. by scanning the on-screen QR-code, or connecting manually)
2. Swipe down to open Quick Settings and select Screen Mirroring.
3. Select your Cynap system from the list.
vSolution Cast on Windows
1. Ensure that you are in the same network as your Cynap system.
(e.g. by scanning the on-screen QR-code, or connecting manually)
2. Start vSolution Cast.
3. Select your Cynap system from the list.
Miracast
on Windows
Miracast
on Android
AirPlay
on MacOS
AirPlay
on iOS
Chromecast
on Windows,
MacOS and Linux
Chromecast
on Android
vSolution Cast
on Windows