Quick Start Guide for ZIVE SP2, ZIVE SP5, ZIVE MP2, and ZIVE MP5
¨
Double click on
Run Device Manager on control panel.
Microsoft Windows will detect ZIVE instrument.
©
Note:
Software manual and hardware manual are located at
c:\program files\zivelab\sm\manual folder.
Run sm.exe in c:\program files\zivelab\sm folder.
¦Install data analysis software packages.
Click ZMAN button to install EIS data analysis
software package
Click PathFinder button to install EIS data
management tool
Click IVMAN button to install DC data analysis
software package
Click SIM4U button to install cyclic voltammetry
digital simulation software package
§Plug in the ZIVE instrument’s power cord.
Plug in the USB cable.
Plug in the cell cable.
Switch on the ZIVE instrument.
¥Click Labview RTE2013 button, which is needed
for data analysis packages.
¤The Smart Manager installation program will run.
Follow the prompts through the rest of the
installation process.
If Microsoft visual C++2008 was not installed on
your PC, it will be installed. Or if VC++2008 was
installed on your PC already, click cancel button.
£Insert installation CD and click SmartManager
button to install Smart Manager program.
Hardware update is completed.
Click “Browse” button.
Select “Install from a list or specific location (Advanced)”.
Click “Reinstall Driver” button.
Smart Manager
ZIVE SM
1. EIS software package(EIS)
1) Potentiostatic EIS
2) Galvanostatic EIS
3) Pseudo Galvanostatic EIS
4) OCP EIS
5) Potentiodynamic PEIS
6) Galvanodynamic GEIS
7) Potentiostatic HFR
8) Galvanostatic HFR
9) Potentiodynamic HFR
10) Galvanodynamic HFR
11) Multisine Potentiostatic EIS
12) Multisine Galvanostatic EIS
4) Electrochemical analysis software package(EAS)
1) Step techniques
- CA(Chronoamperometry)
- CC(Chronocoulometry)
- CP(Chronopotentiometry)
2) Sweep techniques
- LSV(Linear sweep voltammetry)
- SDV(Sampled DC voltammetry)
3) Pulsed techniques
- DVP(Differential pulse voltammetry)
- SWV(Square wave voltammetry)
- DPA(Differential pulse amperometry)
- NPV(Normal pulsed voltammetry)
- RNPV(Reverse normal pulse voltammetry)
- DNPV(Differential normal pulse voltammetry)
3) Corrosion software package(COR)
1) Tafel(Tafel experiment)
2) Rp(Polarization resistance)
3) RpEc trend
4) PDYN(Potentiodynamic)
5) CYPOL(Cyclic polarization resistance)
6) GDYN(Galvanodynamic)
7) Reactivatioin potential
8) Ecorr vs. time
9) Galvanic corrosion
10) Potentiostatic ECN
11) Glavanostatic ECN
12) ZRA mode ECN
2. Battery/Energy software package(BAT)
1) CC/CV charging discharging test
2) CC/CC charging discharging test
3) Discharging test
4) EVS test
5) Variable scan rate CV
6) Pstat IV curve
7) Gstat IV curve
8) SteadyState CV
Optional software package includes;
2. Galvanostatic
4. Potential sweep
6. Cyclic voltammetry
Basic techniques with standard functions
1. Potentiostatic
3. OCP measurement
5. Current sweep
Standard software includes;
Switch on the ZIVE instrument.Plug in the cell cable.
power cord.
Plug in the potentiostat’s Plug in the USB cable.
Select “C:\Program Files\Zive Lab\SM_ \Driver” folder
and click “Next” button. ( : driver version)
*
*
ZIVE SP2ZIVE SP2
ZIVE SP2ZIVE SP2
