WONGKUO SD200 Reference manual
V2.0
WONGKUO
WONGKUO Battery Camera is a high-definition security device
specially designed for home users. It not only has the function of
ordinary security devices to view the monitoring content online at
any time, but also integrates many features such as visitor voice
intercom, short video recording, remote active wake-up, real-time
online multiplayer viewing, ultra-low power consumption, etc., to
effectively protect your home..
Introduction to the Product
Contents
List of Standard Version
WONGKUO
Micro USB
Rechargeable
6000mAh
Battery Pack
WONGKUO
Battery Camera
360° Rotatable
Bracket
User Manual Anchor Packs Screw Packs
Englisches —————————————— 1-27
1
List of Solar Version
Part Characteristics
WONGKUO
Battery Camera
Rechargeable
6000mAh
Battery Pack
Solar Panel +
Mounting arm
User Manual
Screw Packs Micro USBStand Anchor Packs
WONGKUO
Light Meaning
For a better experience with WONGKUO Battery
Camera, fully charge the battery pack separately
before your first use.
1. Take out the charging cable from the accessory package,
and correctly insert its micro end into the micro USB port on the
back of the battery pack; correctly insert the USB connector at
the other end into the corresponding USB interface of a power
adapter (phone charger) with a DC voltage of 5V and a current
of 1A.
2. Start charging the battery pack separately by plugging the
power adapter (phone charger) that is correctly connected to
the battery pack into the socket at home.
1. Microphone
2. Wide-angle lens
3. Indicator light
4. PIR motion sensor
5. Photosensitive sensor
6. Intercom
Red indicator light
The red light flashes to
indicate connection to WiFi
Blue indicator light
The blue light is constant on to
indicate real-time monitoring view
The blue light flashes to indicate
PIR motion detection
Introduction to the Battery Pack
32
1.Scan the QR code below with your smartphone or search Aiwit
in App Store or Google Store for download and installation.
2. Open the successfully installed the Aiwit APP, follow the
instructions in the APP, register an account with your email
address and remember the account. This will be the account to
log into the Aiwit APP.
3. Both the red and blue lights on the top of the battery pack will
be constant on while charging. When it is fully charged, the red
light goes out and the blue light stays on, and the battery pack
automatically enters the state of protection to accidents caused
by overcharging; the first charge takes 6-8 hours.
= Battery pack charging status light
= Battery pack fully charged status light
Download and Install Battery
Camera Aiwit APP
Set up the Battery Camera
1. Remove the battery cover.
Take out the battery camera, gently twist the bottom battery
cover counterclockwise and stop when the marking is aligned
with the unlock icon, and then remove the bottom cover from
the battery camera.
2. Insert the battery.
Blue indicator light
The blue light is constant on to
indicate real-time monitoring view
The blue light flashes to indicate
PIR motion detection
Aiwit APP iOS / Android
Application download
Tear off the insulation sticker on the fully charged battery pack
and insert the battery pack into the corresponding card slot at
the bottom of the battery camera until a “click” is heard, which
indicates that it is in place; locate the unlock symbol on the
back of the battery camera and align it with the marking on the
battery cover; push the cover and rotate it clockwise until the
marking is aligned with the lock symbol, and then close the
cover.
54
3. Match the battery camera in the AiWit APP
WONGKUO Battery Camera will start automatically and enter
the network matching mode with a voice prompt when the fully
charged battery pack is correctly installed and the insulation
sticker is removed; to match the battery camera, follow steps
(1) Open the Aiwit App on your mobile phone and log into the
previously registered email account.
(2) Select the homepage + icon in the APP, and click “Add Camera”.
+Add New Device
(3) Go to the next step, select Battery Camera 2 and click “OK”.
(4) (If your WongKuo Battery Camera is in normal network matching
mode, the red light on the front of the camera is flashing, and the
camera speaker has corresponding voice prompt, please ignore
Step 4.) Remove the battery pack and reinstall it, press and hold
the “Setup” reset button on the back of the camera until the red
light flashes, release the “Setup” reset button, and enter the next
step after hearing the voice prompt of network matching.
(5)
Setup
Go to your 2.4G WiFi network page, enter your WiFi
password, and then click “Next” (Please confirm that
the WiFi connected to is a 2.4G network, and the
WiFi name is English or English plus numbers, and
there is no space; the WiFi connected to the mobile
phone and the WiFi used for matching are the same
network with the same name; WONGKUO Battery
Camera does not support 5G network matching).
(6) Make sure that your WONGKUO Battery Camera is
connected to the WiFi network correctly and click
“OK” button to enter the next step.
Confirm that the WiFi
connection is correct
76
Aim the lens of WONGKUO Battery Camera at the QR
code displayed on the mobile phone APP, keep the lens
about 0.33ft away from the phone’s screen, and don’t take
it away until you hear the prompt tone of successful
scanning; wait until the Wi-Fi installation is completed and
select “OK” when you hear the tone of successful
matching. At the same time, all matches have been
completed. (During the QR code scanning process, please
note that the distance between the mobile phone and the
lens cannot be greater than 0.33ft, and there should be no
reflections from the QR code display on the phone screen.)
(7)
Registered successfully
Try it. After Setup is complete, click the middle screen of
the homepage in the Aiwit APP to see the live video.
(8)
1. Attach the bracket to WONGKUO Battery Camera.
Wall Mounting Method of the Camera
2. Tighten the bracket screw by turning it
clockwise with a screwdriver of the
corresponding size.
3. Mark the wall or ceiling with “drill a hole” and
drill a hole in the wall or ceiling with a drill. Insert
the anchor and fix the battery camera with the
anchor screw.anchor screw.
98
1. Introduction to the functions of the homepage
Introduction to the Functional Interface
4. Aim the camera bracket at the base of the
bracket, rotate the threaded rubber cap on the
bracket clockwise to fix the device on the base,
adjust the lens angle of WongKuo Battery
Camera, and tighten the threaded rubber cap.
5. If the lens control surface of WongKuo Battery
Camera is found to be skewed after installation,
loosen the rubber cap and readjust the angle until
the angle is satisfied, then tighten the rubber cap
again to fix it.
1
3
2
5
6 7 10 89
(1) Menu bar
Open it to view your login account, clear cache, reset
account password, enter the help center, feedback and
exit the current account, etc.
(2) “Do Not Disturb” setting button
Click to enter the “Do Not Disturb” setting page. You can
set Timed Do Not Disturb pop-up reminder and turn off
Timed Do Not Disturb. At present we offer three time
options of 30 minutes, 2 hours and 12 hours.
4
1110
(3) Battery Indicator icon
It is displayed in gray on the homepage; it will turn green on
the real-time monitoring screen when charging, with an icon
after unplugging the power cord, it will be displayed in white,
and it will turn red when the power is short, and there will be
an email reminder of power shortage.
(4) Network Signal icon
It is displayed in gray on the homepage. When entering the
real-time monitoring screen, it will be displayed according to
the strength of the local network signal, with an
upload/download speed ratio.
(5) Enter the Real-Time Monitoring screen
Click to enter the Real-Time Monitoring screen, view the live
video on the lens of your WONGKUO Battery Camera, and
choose more operating functions in the Real-Time Monitoring
page (please see the introduction of the live video interface).
(6) Device Information
Click to enter the Device Information page, which displays
various basic information of the current WONGKUO Battery
Camera; you can check the WiFi signal strength, battery
power percentage, etc.; and you can set the device name,
turn on/off Motion Detection, choose to Change Time Zone,
and view cloud storage service information using the master
account.
(7) Device Sharing
Click to enter the Device Sharing page, and share some
functions of WONGKUO Battery Camera with your loved
ones to experience the fun brought by WONGKUO Battery
Camera together (please see the details of device sharing
below).
(8) Motion Detection settings
Click to enter the setting page of Motion Detection. In this page,
you can set the detection sensitivity you need (please see the
details of detection sensitivity below).
(9) Historical Events
Click to enter the page of Historical Events. In this page,
you can play back the videos recorded in various modes
of WONGKUO Battery Camera (please see the details of
playback below).
(10) Services
In order to make customers experience better after-sales
service, this security camera has added an online chat
function, if you don't know how to setup or any problems
during use, please feel free to contact us here, we'll be at
your service in time.
1312
(1) Return button
Click it to return to the homepage.
(2) Video reminder
This icon flashes at the top of the live screen, indicating that
the camera is recording; with good network signal,
WONGKUO Battery Camera will automatically start video
recording when the real-time monitoring live screen is turned
on, and the recording time is 3 minutes. After 3 minutes, the
real-time monitoring will no longer record the live screen.
(3) Resolution
It is the resolution of the video. The default resolution of
Wongkuo Battery Camera is 1080P.
(4) Battery pack battery indicator
It turns green when charging with an icon; after unplugging
the power cord, it will be displayed in white; and it will turn
red when the power is short. Next to it, the number of
remaining power will be displayed in percentage, and there
will be an email reminder of power shortage.
10
2 3
4
6
5
7
8
9
11 12
2. Introduction of live video interface
(5) WiFi network signal
The network signal strength at the current location of your
WONGKUO Battery Camera is shown here, along with the
real-time network upload/download speed. If the WIFI bars
are missing and the screen is stuck, it is recommended to
reinstall it near the WiFi router.
(6) Time and date
Here is the actual year, month and time of the place where
your camera is located. There is no need to set it. When
WONGKUO Battery Camera is connected to the Internet,
it will automatically check the accuracy of the display time.
(7) Real-time monitoring screen
Here is live video from the lens of WONGKUO Battery Camera.
(8) Full Screen mode
Click here to switch the phone to full screen mode, and click
again to return to normal mode.
1
1514
(9) External sound play
Click on the speaker to turn on/off the sound from your
WongKuo Battery Camera. By default, it is off. Please turn
on the speaker when using the intercom function or when
you want to hear external sound.
(10) Video playback
Click to enter the page of Historical Events, view and playback
videos recorded during PIR monitoring and real-time
monitoring (same as the function button of “Historical Events”
on the homepage. Please refer to the instructions below for
details).
(11) Intercom Function button
Hold down the Microphone icon and speak into the phone
microphone. When you have finished, release your hand. The
sound will be transmitted to WongKuo Battery Camera via the
network and played by the built-in speaker of the camera, so
that the guest can hear what you say; before intercom, please
make sure that the speaker on your APP real-time monitoring
screen is turned on, otherwise you will not be able to hear the
guest. (The guest does not need any operation, but stays
within 9.84ft from the camera during intercom)
(1) Sharing via Email
Sharing via email does not require the master and the
sub-accounts to be used together. After the sub-account
sends the registered APP email account to the master
account, the user of the master account can select
“Sharing via Email”, enter the sub-account email and
confirm, and then the sharing will be successful.
(12) Screenshot
Click the button, the APP will directly take a screenshot of the
live image in the monitoring screen and automatically save it to
your mobile phone. You can directly open the screenshot from
the mobile phone.
3. Details of Device Sharing
1716
(2) Sharing via QR Code
There are two ways to share via QR code
1. When the master account and the sub-account are together,
the sub-account opens the sharing page on the APP and
selects the scan function. The master account clicks to open
Sharing via QR Code on the sharing page. At this time, a QR
code picture will appear on the mobile phone of the master
account. The sub-account only needs to scan the QR code on
the phone of the master account with the scan function to share
successfully.
2. When the master account and the sub-account are not
together, the master account needs to open the QR code
sharing function, save the screenshot of the QR code
generated, and then send the QR code to the sub-account
through email and other methods. After receiving the
screenshot, the sub-account can directly scan the code by
APP or save it to the mobile phone first, and then scan
corresponding QR code in the album by APP to share
successfully.
Please be aware that only the first matched account
will be the master account, and only the master
account can remove unwanted sub-accounts from
the sharing page.
4. Details of Detection Sensitivity
Enter the Motion Detection setting page, and you can see
four different sensitivity levels. Just slide the small blue dot
to the corresponding position according to your actual
scenario usage needs. After selecting the distance, click
Save on the top, and you can return only after seeing the
prompt of successful setting on the screen. The more
sensitive the camera, the more power it consumes; “Off” is
to turn off detection, where WONGKUO Battery Camera will
not provide you with motion detection services.
1918
5. Details of Playback
12 1
4
11
5
2
3
7 6
10
9
8
(1) Select button
Provide single/multiple selection to delete video files
(2) List of all video files
Click here and all the video files will be displayed below.
(3) Video playback full screen mode
Click here to switch the video played back on your phone to full
screen mode, and click again to return to normal mode.
(4) List of video files recorded during PIR motion
detection
Click here and only the videos recorded during PIR detection
are displayed below. Each video is 15 seconds long.
(5) List of video files recorded during real-time
monitoring
Click here and only the videos recorded during real-time
monitoring are displayed below. The duration is subject to
what you record, but it is no more than 3 minutes.
(6) Playback Video download
Click the “Download” touch button to download the video file
you need to your mobile phone. The format is MP4, and the
resolution is 1080P.
(7) Playback Video
Click on the recording to watch the playback directly. The video
files are stored in the cloud.
(8) Date selection bar
Here you can select the date you want to view the playback.
Only the last 7 days are displayed.
(9) Month and date selection bar
Click to enter the page of More Date Selection to select the
time period you want to view.
(10) Video playback progress bar
You can view the current playback video progress here.
2120
(11) Play/Pause
Click to control the play and pause of the current playback
video.
(12) Return touch button
Click here to return to the homepage directly from the playback
function page.
Help
In case of any problems during the application
installation process, try the following steps:
1. Check your WiFi password
The most common problem during installation is an incorrect
Wi-Fi password. The password is case sensitive. Please check
your password carefully.
If failed, try to enter 8 bit password.
2. Restart the router/modem
If you still run into problems after entering the correct password,
try unplugging your router/modem. Wait 30 seconds, then plug it
in and turn it back on. Install it again in the AiWit APP.
FAQ
1. Where are my videos stored?
Your videos are stored in the cloud.
2. How to reset network settings?
Remove the battery pack and reinstall it. Press and hold
the Setup button on the back of the camera until the red
light flashes and you hear the voice prompt for the
network matching. Follow the steps in the APP or the
manual to complete the WiFi settings.
3. How to share this device with family?
Open the Aiwit APP and tap the sharing icon on the
homepage. Click Sharing via Email or Sharing via QR
Code. You can share the device with up to 8 users.
Sharing via Email:
New users must download the Aiwit APP and create an
account with the same email address shared with the
device owner (master account); provide the new user’s
email account (sub-account) to the device owner to
confirm addition of sharing.
Login to your account and you will see shared device.
Sharing via QR Code:
①Open the AiWit APP on the new user’s smartphone.
②Click the “+” icon on the homepage.
③Click “Sharing via QR Code” to scan the QR code
generated before the device owner shares the interface
or the screenshot picture of the QR code provided by the
device owner.
④You will see “Successful sharing”, then click “OK”.
2322
Install Solar Panel
4. How many users can watch the video at the
same time?
Help
FAQ
Up to three users can watch live video, but only one user can
use direct intercom. Both iOS and Android are compatible.
5. Does it support 5GHz WiFi network?
No. WONGKUO Battery Camera only supports 2.4GHz WiFi
network.
6. Why is the WiFi signal on my device so bad?
Your device may be too far away from the wireless router,
or there may be some obstacles between your device and
the router, which will reduce the signal strength. You can try
to relocate your router or install a signal extender for your
wireless router.
7. How to adjust the motion detection sensitivity?
Click the Motion Detection icon on the APP homepage to enter
the setting page.
Motion detection sensitivity
Fast: record and notify every movement detect, with minimum
battery life.
Moderate: record and notify when the distance between the
detected moving object and the camera becomes shorter, with
standard battery life.
Show: record and notify when the distance between the
detected moving object and the camera becomes the shortest,
with maximum battery life.
8. How can I enable notifications on my phone?
You need to allow the Aiwit APP to access your phone
permissions and enable notifications.
Follow these steps to enable notifications.
1. Open the permissions management in the phone’s
Settings, find the installed Aiwit APP and click enter, open
all the options inside and save the settings.
2. Open the Aiwit APP, click the bell icon at the top of the
homepage, and make sure there is no “Timed Do Not
Disturb” set in the page.
Before installing the solar panel, complete all the
settings for the battery camera in the Aiwit APP.
1. Choose Install Location
Choose a place with no shade, preferably in the sun. The
solar panel should be installed in a place that can receive
direct sunlight for several hours a day, and should be
positioned exactly in the direction of the longest direct
sunlight exposure.
2. Mark Install Location
Mark the solar panel mounting arm where you plan to install
it, using a pencil to mark the location of the screw holes.
2524
After-Sales Service
3. Drill
FAQ
You can use an electric drill to make holes at the location you
marked earlier.
For brick, concrete or plaster surfaces, plastic anchors must be
used. Please use a hammer to install the anchor in place.
For wooden surfaces, you can omit the anchor and drive our
standard tapping screws directly into the surface using an
electric screwdriver.
4. Install the panel bracket arm
Please use an electric screwdriver to fix the bracket arm on the
wall with standard tapping screws and tighten it clockwise.
It is not recommended to use a manual screwdriver to avoid
improper installation due to insufficient force; it is not
recommended to install on plastic or ceramic tiles or glass,
because plastics are easily deformed, ceramic tiles and glass
5. Install solar panel
Install the solar panel on the bracket arm to make sure it is
properly installed.
Note: You can adjust the angle of the solar panel for better
sunlight coverage. Simply loosen the adjusting screw on the
mounting arm, adjust it to the desired angle, and then tighten
the screw again. You need to find the right direction to install
the solar panel, and you will hear a slight “click” when it is
inserted in place.
6. Plug in the charging cable
Finally, correctly insert the charging cable of the solar panel into
the corresponding micro port on the back of the battery camera.
Now, the entire installation process of the solar panel is
completed.
If the above solutions cannot solve your problem, please contact
our after-sales support team.
2726
Table of contents
