WoodEze NLE7WZ-RS-20 User manual

Rocket Stove
Model: NLE7WZ_RS_20
INSTRUCTION MANUAL
Thank you for purchasing the WoodEze
Rocket Stove. Please take a moment to
read the following instructions below to
assist in assembly, and safe usage.

Warning
Keep unit out of the reach of children and pets. Direct contact or touching unit
can result in burns. If using pellets as fuel pellets must be less than 1.5 inches in
size to prevent blocking of flue outlet.
What's in the Box?

Assembly of the Rocket Stove
1.Assemble Leg Holders with Screws
2.Attach Stove Feet with Screws
3.Attach feeding hopper
4.Attach Heating Holder to top of the stove.
5.Attach Ash Pan & Grate 1.
Lighting the Rocket Stove
Using small dry kindling to start the stove. Once a base
fire is established you can add larger pieces of wood to
keep fire going. If using wood only remove the feeding
hopper from the Rocket Stove. When using pellets, you
will use the feeding hopper. The WoodEze rocket stove
can be used with wood or pellets.
Note: Pellets no larger than 1.5" can be used or you will
clog the feeding hopper.
When feeding the hopper or wood feeder use with
caution and gloves to prevent burns. Close the feeding
cap after adding fuels.

WARNING: Make sure fire is completely out and
cooled prior to packaging up the Rocket Stove to
avoid the risk of burns and fire.