WOOSIM PORTI-P User manual

http://www.woosim.com
MODEL PORTI-P
WOOSIM SYSTEMS Inc.
#501, Daerung Technotown 3th, 448,
Gasan-Dong, GeumChun-Ku, Seoul,
Korea
Tel : [phone]
Fax : [phone]
URL: http://www.woosim.com
(2Inch Panel Printer)
Rev. 5.0
All specifications are subjected to change without notice

Porti-P Rev. 5.0
http://www.woosim.com
2012-05-21
2
All specifications are subjected to change without notice
¦ Copyright
PORTI-P 2Inch Panel Printer Operator’s Manual.
Copyright ⓒ2012 by Woosim Systems Inc.
All rights reserved.
The information contained in this manual is the property of Woosim Systems Inc.
And may not be reproduced in whole or in part without the prior written permission of
Woosim System Inc.
¦ Trademark
a registered trademark of Woosim Systems Inc.
All other trademark are the properties of their respective companies.
¦ Caution
Some semiconductor devices are easily damaged by static electricity. You should
turn the printer “OFF”, before you connect or removed the cable on the rear side, in
order to guard the printer against the static electricity.
If the printer is damaged by the static electricity, you should turn the printer “OFF”
¦ Notice
The contents of this manual are subject to change without notice.

Porti-P Rev. 5.0
http://www.woosim.com
2012-05-21
3
¦ Introduction
The PORTI-P is an extremely simple and functional panel printer.
It is the ideal solution for applications which require the immediate printing of data on
a paper, whether they be of an industrial, professional or laboratory nature.
Medical analyzer, Industrial instrument, Recorder, Geological analyzer, Underground
analyzer, Chemical analyzer, Metallic analyzer, etc.
The general features of PORTI-P printer are as follows:
u Ultra small size rack mount printer.
u Very silent printing thru direct thermal printing method.
u High speed(50mm/sec, MAX)
u High resolution(203dpi : 8dots/mm).
u UART(RS-232C or TTL), Parallel(Porti-PP40, PP60 Only) interface
u Support text and graphic printing.
u Easier paper loading by CLAMSHELL design.
u Easier maintenance with self-diagnostics.
u In field programming – Update Firmware, Download Fonts and Logos
u Microsoft Windows XP / VISTA / 7 / CE / Linux / Android compatible.
u Flow control : Software (XON/XOFF)
※ Hardware flow control not supported in printer.
u Agency Approvals

Porti-P Rev. 5.0
http://www.woosim.com
2012-05-21
4
¦ Operating Precautions
Please follow the precautions below to enjoy and maintain the full
performance of the printer.
u Using the Printer
● Be careful not to drop or bump the printer on a hard surface.
● Do not install the printer in direct sunlight or such areas.
Suitable environment for the use of the printer is as follows:
◆ Operating temperature :-10°C to 50°C
◆ Relative humidity : 10% to 90% (No condensation)
● Do not install the printer near devices that generate strong
electromagnetic fields such as a copy machine.
● Do not open the platen cover during printing .
● Do not remove or reinstall the communication cable during printing
or transmission.
● Do not touch the connectors of the communication during printing.
● Switch the POWER OFF when not in use.
● Do not use alcohol or other solvent.
u Thermal Paper Handling
● Store the thermal paper in a cool, dry and dark place.
● Do not rub the paper with hard object.
● Do not leave the paper with hard object.
● Do not allow plastic film, erasers, or adhesive tape to touch the paper
for long periods.
● Do not stack the thermal paper with diazo copies immediately
after copying or wet-type copies.
● Do not use chemical glue.
● Always use the clean thermal paper.

Porti-P Rev. 5.0
http://www.woosim.com
2012-05-21
5
¦ Note
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
These equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception , which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.

Porti-P Rev. 5.0
http://www.woosim.com
2012-05-21
6
CONTENTS
1. Outline ............................................................................................................................................7
1.1. Model classifications .................................................................................................................7
1.2. Product Part Number System.....................................................................................................8
1.3. Specifications ............................................................................................................................9
2. Setting up the printer ..................................................................................................................11
2.1. Printer & Accessories ..............................................................................................................11
2.2. Printer Features ........................................................................................................................12
2.2.1. Porti-P30............................................................................................................................12
2.2.2. Porti-P40 (include P240, PP40) .........................................................................................13
2.2.3. Porti-P60............................................................................................................................15
2.3. Installation ...............................................................................................................................16
2.3.1. Porti-P30............................................................................................................................16
2.3.2. Porti-P40 (include PP40) ...................................................................................................17
2.3.3. Porti-P240..........................................................................................................................18
2.3.4. Porti-P60............................................................................................................................19
2.4. Replacing the paper roll ...........................................................................................................20
2.5. Setting operation mode ............................................................................................................21
2.6. Power supply ...........................................................................................................................27
3. Interface ........................................................................................................................................28
3.1. Serial Interface (Porti-P30) ......................................................................................................28
3.2. Serial Interface (Porti-P40 /60, P240)......................................................................................29
3.3. Serial and Parallel Interface (Porti-PP40/60) ...........................................................................30
4. Using the printer ..........................................................................................................................33
4.1. Control panel ...........................................................................................................................33
4.2. The self test..............................................................................................................................33
5. Consumable Parts ........................................................................................................................34
5.1. Recommended paper ...............................................................................................................34
5.2 Printing position .......................................................................................................................34
6. Revision History ...........................................................................................................................35

Porti-P Rev. 5.0
http://www.woosim.com
2012-05-21
7
1
1. . O Ou ut tl li in ne e
1.1. Model classifications
PORTI–P ( ) ( ) ( )
Model name
Interface
None : UART
P : Parallel
Size of roll paper
30 : 57mm wide, 30 Ø
40 : 57mm wide, 40 Ø
60 : 57mm wide, 60 Ø
Power
None : DC 9V
5V : DC 5V
12V : DC 12~24V

Porti-P Rev. 5.0
http://www.woosim.com
2012-05-21
8
1.2. Product Part Number System
Model name / Interface Spec.
Example) 1. Porti-S40 Serial/Bluetooth Part No. ⇒ S40/A1
2. Porti-SC30 Bluetooth Only Part No. ⇒ SC30/Z1
Note) The above table is the interface format which is supported.
But some of the interfaces are not supported according to the product
and please contact us, if you have any questions regarding the interface.
S40
SC30
W25
.
.
.
Wired
Wireless
A
RS-232C
1
Bluetooth
B
TTL
2
IrDA
C
USB
0
None
D
RS-485
E
Parallel
Z
None

Porti-P Rev. 5.0
http://www.woosim.com
2012-05-21
9
1.3. Specifications
Item
Specification
Printing method
Direct thermal line printing
Characters per line
42cpl (MAX)
Character size
Eng. : 9*24dots, 12*24dots Kor. : 16*24dots, [24*24dots]
Optional Characters
Simplified/Traditional Chinese, Arabic, Cyrillic, Russian, Tukish,
Greek, Japanese, Persian, Latin9 and Others upon request.
Resolution
203dpi, 8dots/mm
Print width
2-inch (48mm, 384dots)
Printing speed
50mm/sec (MAX)
Dimensions
(including PCB)
-P30 : 75 * 55 * 30.3 mm
-P40,P240 : 80 * 75 * 40 mm
-P60 : 76 * 93 * 62 mm
-PP40 : 80 * 75 * 55 mm
-PP60 : 76 * 93 * 62 mm
Weight
(including roll paper)
-P30 : 102.5g
-P40,P240 : 153g
-P60 : 274g
-PP40 : 164.5g
-PP60 : 285.5g
Interface
UART(RS-232C or TTL) (P30,P40,P240,P60,PP40, PP60)
Parallel (PP40, PP60 only)
Paper supplied
Thermal roll paper (57mm wide, 30ø 40ø, 60ø)
Barcode supplied
1-dimension : Code128, Code39, I2/5, Code93 UPC, EAN,
KAN, JAN, CODABAR
2-dimension : PDF417, QR-Code, DATA Matrix
Driver
Microsoft Widows XP / VISTA / 7
Windows CE, Linux, Android OS driver compatible
Receive buffer size
10K bytes
Input Power
5VDC, Standby 60mA and Max 2.5A (P30, P40,P240)
9VDC, Standby 60mA and Max 3A (P30,P40,P240, P60)
12V~24VDC, Standby 60mA and Max 3A (PP40, PP60)
(Continue…)

Porti-P Rev. 5.0
http://www.woosim.com
2012-05-21
10
Item
Specification
Environment
conditions
Temperature
-10°C ~50°C (operating)
-10°C ~ 70°C (storage)
Humidity
30% - 80% (operating)
10% - 90% (storage)
MCBF (Mean Cycle
Between failure)
Mechanical
37,000,000 lines
Head
Approximately 50 Km
< Table 1 >