wordin WH-300P Platinum User manual

Thank you for your purchasing ‘Wordin’lower-body bathing machine.
Be sure to read this user’s guide and use product safely and rightly Before use.
After reading, please keep this in place where other people can see
•Design and specifications are subject to change without notice.
•The colors of the products can look somewhat different from the real
color because of printing process.

Safety Precautions
Safety precautions has its purpose to avoid safety and property accident by using the product
safely and appropriately therefore it must be abided.
The following is important information concerning safety, therefore must be abided.
Danger : High danger is forecasted such as death or severe wound by wrong handling of
the product and is the case of high emergency.
Caution : Possibility that death or severe wound Can be caused by wrong handling.
Beware : Person Can get physical damage or property damage by wrong handling.
Beware
Beware
Do not open the steam cover while
using. Can be cause of burn.
Do not put any cleaning synthesized
detergent or chemical material to the
inner part of the main body. Can be
cause of explosion or fire.
oil
benzene
thinner
Do not get or give intense shock to the
main body. Can be cause of product
damage.
Do not randomly disassemble the steam
cover during or right after use. Can be a
cause of burn.
benzene
thinner
Do not tilt or knock down the main
body during use. Can be cause of burn
or electric shock.
When caring the exterior of the main body,
clean with dry fabric after unplugging the
power plug and do not clean with volatile
material such as benzen, thinner or alcohol
and do not directly spray water. The
exterior part gets damaged.

Do not grab and insert to the main body
or the power switch part with the
material such as pin, needle and such.
Can be cause of electric shock or fire.
In case the product is broken or
malfunctioning, to not repair by yourself
and contact the company’s service center.
Can be cause of electric shock or fire.
Safety Precautions
Beware Beware
Caution Caution
Clean after unplugging the power plug,
and do not directly soak the main body
of the product to any liquid.
In case person such as the elderly and
children, give sufficient education on
the control method. Can be the cause
of low temperature burn when using
for a long period of time.
If the power cord is damaged, stop use
immediately and exchange the power cord
through the company’s service center and
use. Can be cause of electric shock or fire.
When plugging or unplugging the power
plug from the socket, turn the power of the
main body first and avoid the hand from
contacting to the power plug pin directly.
Can be cause of electric shock.
Do not use the damaged or worn power
plug. Can be cause of electric shock or fire. Do not pull the power cord part or touch with wet hand. Can be cause of electric
shock or fire.

Safety Precautions
Caution Caution
Beware
Must unplug the power plug when not
using. Can be cause of fire.
Do not simultaneously plug many
product’s power plug to one socket.
Can be cause of fire.
Do not excessively bend the power plug
or put heavy material which may damage
the plug. Can be cause of electric shock.
Do not put towel on the floor. Can be
cause of heat collection phenomenon.
Appropriate Lower Body Bathing Method
1) Please wear comfortable clothes that is worn inside the house.
- Customer who would like to sweat a lot should wear long sleeve shirt and shorts.
2) Open the sliding door and side door, and sit at a comfortable posture on the chair.
3) Close the sliding door and side door, and put the towel for lower body bathing.
- Minimizes loss of heat.
4) Control the controller and start lower body bathing.
5) You can enjoy more delightful bathing when cleaning the inner part of the product with
vacuum cleaner once a week.
! Tip: To have quick effect of lower body bathing, sweating gets more effective when
preheating for 20 minutes.
! Tip: The old and the weak or people with sensitive skin can cover the seat with the towel,
but do not put feet in front of the chair(vent).

Name of Parts
①Sliding Door
②Controller (Power, Temp. & Time setting)
③Reclining Seat
④Height-controllable head rest
⑤Chair(LED Lamp under chair)
⑥Water Inlet
⑦Steam Injection Nozzle
⑧Side Door
accessories
Use’s Guide
Towel
for preventing heat loss
The belt for movement
(Except WH-950AP)
measuring cup

Name of Parts
①Sliding Door
②Controller (Power, Temp. & Time setting)
③Back of chair
④Chair(LED Lamp under chair)
⑤Front grille of the chair
⑥Side Door
⑦Water Inlet
⑧Steam Injection Nozzle
accessories
Use’s GuideTowel
for preventing heat loss
measuring cup

Explanation for Usage
How to operate controller
1) Initial screen appears when plugging
the power plug to the socket.
2) When pushing the ‘power’ button of
the controller, basic value of ‘time’
and ‘temperature’ is displayed and
the setting screen appears.
※ If there is no control after pushing
‘ ‘power’ button, it passes onto the
operation screen.
3) Time Setting
When pushing the ‘time setting’
button, it could be set between
30~90 minutes at 10 minute interval.
4) Temperature Setting
When pushing the ‘temperature
setting’ button, it could be set
between 35~60℃ at 5℃ interval.
5) When the set time ends, ‘power’ turns off and all the operation is stopped and returns to
the ‘initial screen’.
※Setting button(‘TIME’, ‘TEMP’) could be pushed during the lower body bathing, to reset the
‘time’ and ‘temperature’ and when pushing ‘POWER’ button during use , all the operation is
stopper and returns to the ‘initial screen’.
Setting Screen Operation Screen
Set Time
Set
Temperature
Remaining
Time
Current
Temperature
Initial Screen
Steam Lower Body Bathing Method
1) Inject 1 cup(100cc) amount of water measured in the steam measuring cup provided with the
purchase of the product to the water inlet.
- 1 time injection amount is most adequate to use one hour of steam lower body bathing.
- At least operate for 30 minutes when injecting water for 1 time.
2) The operation afterwards is equal to the controller controlling method.
3) It is okay for the old and the weak of person with sensitive skin to put towel on while using.
!Tip : For more enjoyment, use water brewed with green tea, Chrysanthemum Tea, rose tea, jasmine
tea and such fit for one’s preference.
- Do not put the whole tea bag to the inlet. Can be the cause of block of inlet.
!Tip : Person with disease can receive the medicine effect on the body when lower body bathing with
medicinal herbs that one drinks injected.
!Tip : Person who want dry lower body bath and does not wish to use steam, it is good to use
wormwood or medicinal herbs at the floor.
!Tip : Do not put alien material such as gel, body lotion and such to the inlet. Can be the cause of inlet
blocked.

Product Configuration and Specification

Inspection Method when Occurrence of Malfunction
Even though the product is not broken, inexperienced usage method or simple factor
could be the cause of malfunction.
At such situation, please check the inspection method as the below and if problem can
still not be solved, unplug the power plug and contact the agency where you purchased
the product or to the headquarter.
Malfunction
Symptom Inspection Factor Measures
Power is not
turned on.
See if the voltage is 220V.
If 110V, use the transformer to boost
the voltage.
See if the socket is working.
Plug another electric machine to the
socket and see if it is working.
Isn’t the power plug off from the socket or
incompletely plugged?
Completely plug the power plug to the
socket.
Is the power switch of the main body on?
Check if the lamp is lighting from the
power switch and again turn on the
power switch.
There is no
steam coming
out.
Is adequate amount water injected?
Put water of maximum of 1 paper cup to
the water inlet.
Is the water inlet blocked?
Check if the inlet is blocked by opening
the water inlet, and remove the residue.
-
As the steam is in fine particle form, it
might not be visible by eyes but can be
felt directly by skin.
Too hot!
-
It is okay to place thin towel on the chair
or steam cover for people with sensitive
skin. Put feet away from the front of the
chair(vent).
Not hot!
-
This product is designed for the body to
use at the most adequate temperature.
It is better to use by preheating for 20
minutes when wishing to sweat a lot.
Lamp is turning
off!
See if the power is on.
If the power is on, but the lamp is off,
the life of the lamp have ended, please
exchange the lamp. The life of the lamp
is 1 year of A/S period free of charge at
the usage amount of 1 hour per day
standard, when using for business it is
at the period of 6 months.
Customer Consultation Contact 1588-4586
If problem cannot be solved after taking measures,
please contact the customer consultation.

Proof of Insurance
Our company proves that the insured have applied for
the “product liability insurance” with this security.
Policy
Holder Korea Testing Certification
Insured
WORDIN
Address
155, Sinnaman-gil, Namyang-eup, Hwaseong-si,
Gyeonggi-do, South Korea
Insurance Information
1. Name of Insurance Company : Korea Federation of SMEs
2. Security No : P151500393
3. Insurance Plan : Product liability insurance
- Security Item : Lower body bathing sauna machine
(electric sauna machine)
4. Compensation Limit Amount :
bodily and property damage 300,000,000
- 1 claim /annual total compensation limit amount

Product Warranty
Service Free of Charge
Consumer Damage Type Within Warranty Period After Warranty Period
When product is damaged on performance, malfunction at normal condition
□
Occurrence of critical abnormal factor within 10 days of purchase
exchange of product or refund
N/A
□
Occurrence of critical abnormal factor within 1 month of purchase
exchange of product or
repair
free of charge
N/A
□
Damage occurred during delivery or installation process during
□
product purchase
exchange of product
N/A
□
If the exchanged product requires critical repair within 1 month
refund
N/A
□
If exchange is impossible
repair free of charge
N/A
□
Malfunction of product to 3 times of the same cause
repair free of charge
repair with charge
□
Malfunction of product for the 4th times of the same cause
exchange of product or refund
repair with charge
□
Malfunction of product for the 5th time of difference cause
exchange of product or refund
repair with charge
□
If the business owner have lost the product that the consumer
asked for repair
exchange of product or refund
refund of straight line method
depreciation
remaining amount
with
additional 10%
□
If repair is impossible as there is no repair material within the parts
possessing term
exchange of product or refund
refund of straight line method
depreciation
remaining amount
with
additional 10%
□
If repair is impossible even though repair parts is available
exchange of product or refund
refund of straight line method
depreciation
remaining amount
When product broke by the fault of the consumer
□
If repair is impossible even though repair parts is available
□
(within the term of parts possessing term)
repair with charge
repair with charge
□
If repair is impossible as repair parts is unavailable
□
(within the term of parts possessing term)
collect amount that is the same
amount
of repair charge and
exchange
product
follows the company standard
Product
Warranty Period is
1 year
About
service
Our
company implements the product warranty as below based on the Consumer Damage
Compensation
Rule(announced by Ministry of Finance and Economy No.2000-21).
When
service is requested, service is provided by our company or designated affiliate.
Compensation
or information notification will be given within 7 days, and compensation
for
damage will be solved within 14 days after the notification date.
Product Name Model No.
Purchase Date - - Serial No.
Purchase Shop Sales Price
Service with Charge
When
the product is not broken
□In case it is handled without disassembling as well as explaining the usage of the product function,reinstallation by the lack of installation
by the seller, 1 time free of charge(from the 2nd time, with charge)
□Lack of installation by the delivery or moving of the product, reinstallation by the fault of the customer or by the request of the customer,
request of internal cleaning, with charge from 1st time
□When the product is broken by the fault of the customer
□When product is not working by mishandling or fault, random repair of the customer
□When product is not working by wrong repair by the person who is not the official person from the company or service center
□When product is not working by purchasing and using separate material that is not made from the company
□Damage or malfunction of product by dropping or moving after installation
□When product is not working by using consumables or optional product that is not designated by company
Other
cases
□When product is not working by force majeure(fire, damage from sea wind, flood damage)
□When life of consumable is ended(ex. infrared light lamp)
※Please read the manual firsthand, as asking for repair in case the product is not broken, fee is
charged.(If repair is impossible, separate standards apply)
※This warranty only used in Republic of Korea and cannot be issues again, therefore store this well with
the manual.

Wordin
Myeongjak
Masterpiece
155, Sinnaman-gil, Namyang-eup, Hwaseong-si,
Gyeonggi-do, South Korea
Tel : [phone] E-mail: [email protected]