Aquatic INFINITY 1 User manual

GENERAL SPECIFICATIONS:
Tub Size 66” x 66” x 35”
168 cm x 168 cm x 89 cm
Bathing Well Lounge 1: 40” long
Lounge 1: 21” wide
Lounge 2: 45” long
Lounge 2: 21” wide
23” interior depth
Shipping Weight 649 lbs. / 294 kg
Tub Weight Filled 1196 lbs. / 543 kg
Weight w/Equipment 241 lbs. / 109 kg
Gallons to Overow 115 gal. / 435 L
Gallons to Operate 1 bather: 96 gal. / 363 L
2 bathers: 81 gal. / 306 L
ELECTRICAL SPECIFICATIONS:
Pump 2 HP; 12 AMP; 110V
Inline Heater 1.5 kW; 12.5 AMP; 110V
Requirement 1-15 AMP 2 pole, separate circuit
required protected with Class A GFCI
Blower 1 HP; 10.5 AMP; 110V
Requirement 1-15 AMP 1 pole, separate circuit
required protected with Class A GFCI
This whirlpool will need to be hard wired to the breaker box.
Three outlets will be supplied on the whirlpool.
This unit is not recommended for shower installations.
This unit has a 3/4” female waterfall ll spout connection.
STANDARD EQUIPMENT:
16 Hydrotherapy Jets including:
- 12 Shiatsu Back Jets
- 2 Recessed Rotary Massage Jets
- 2 Full Size Pressure-Flo Hydrotherapy Jets
Air Bath System:
- 1 HP Variable Speed Air Blower with 20-Minute Timer
- Electronic Control Panel
- Automatic Purge and Dry Cycle
- 600 Watt Air Heating System
Aquatic Quality Features:
- 2 HP Run-Dry Pump
- 1.5 kW Inline Maintenance Heater
- ”Quiet Pad”Anti-Vibration Pump Mount for Quiet Pump Operation
- Shiatsu Electronic Control Panel with Preprogrammed Jet Sequencer
- Bath-Side Electronic Control Panel with Temperature Display
- Integral Tile Flange
- Pulsating Neck Jet Pillow and Sculptured Foam Pillow
- 2 Reclining Lounge Seats and 2 Arm Rests
- Continuous Waterfall with Recirculation Pump
- Integrally Molded Fast-Fill Waterfall Spout (valves not included)
- Chromatherapy
- Slip Resistant Floor
- Adjusta-Level Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty
• Jet Finish
- Chrome, Polished Brass, Gold, Polished Nickel
or Satin Nickel
• Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
• Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit Only)
• Hand Held Jet - Chrome or Polished Brass
• Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
OPTIONAL EQUIPMENT:
Two Person Bath
InfInIty 1
Fill
Spout
Location
Overow
Not a drop in model–
66” sides must be against wall
66”
Integral Tile Flange
72 3/4”
Integral Tile Flange
Pump
Blower
24 1/2”
24 1/2”
66”
24 1/2”
48 1/4”
Fax-On-Demand
Document # 1118
26”
22 1/4”
23 1/4”
25”
35”
22 1/4”
93”
69 3/4” to
corner of tub
24 1/2”
Recirculation
Pump
No alternate pump location available.
12
SPECIfICAtIOnS:
The manufacturer accepts a 1/4” variance. There are variations on each tub and specications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub;
Aquatic Industries, Inc. assumes no responsibility for preparatory work. www.aquaticwhirlpools.com 800.555.5324
October 2007
Rough-In Plumbing
Measurements
InfInIty SErIES model # AI1INF6666
*Not available without Fast-Fill Waterfall Spout.