Workrite Ergonomics PEAK-1SA-CCG-S User manual

INSTALLATION MANUAL
79
1
32"
MAX
75x75/100x100(0~22 lbs)
RATED
Use with products heavier than the rated weights indicated may result in instability causing possible injury.
Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
Safety gear and proper tools must be used. This product should only be installed by professionals.
Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact your place of
purchase for a replacement.
Check that the product is secure and safe to use at regular intervals (at least every three months). Counterbalance Monitor Desk Mount
8
1
2
+90°
-90°
±90°
± 9 0°
± 18 0°
± 18 0°
E
H
I
1500481 REV A

2
1 b - 4
1 b - 2
4
3
1 b - 1
1 b - 3
5
1 a
D (x4)
M-C
5
M5x12
M-B
(x4)
M4x12
M-A
(x4)
6
E (x1) F (x1) G (x1) 3mm (x1)
H
6mm (x1)
I
A (x1) B (x1) D (x1)C (x1)
A
I
G
A1
ø 10mm
(ø ")3/8
H
10-50mm
TV
TV
TV
D
I
2
M-C
M-A
M-B
I
F
10-50mm
1
I
A1
A2
A3
1
2
B
C
H
Step 3 (Only necessary for monitor(s) weighing more than 17.6lbs)
• Remove the cable clip from the arm by pushing up from the bottom of the
clip and dislodging the side harnesses from slots.
• Using M5 Allen Key (not provided) rotate bolt ½ turn or 180° to increase
the friction and support heavier monitors.
• Re-attach cable clip
3
I