Workzone Titanium BGS700 User manual
•
Grinder/Sander
I
~ A
Product
Safety P
roducilon
tn.pect.d
CONTENTS:
Warranty
DetaiIs
••••••••••
••••••••••••••••••••••••••••••••••
07
Repair and
Refurbished
Goods
or
Parts
Notice
••••••••••••
08
Explanation
of
the
symbols
on
the
equipment.
•••••••••••••
09
I.
Introduction
..................................................
10
11.
Layout
•••••••••••••••••••••••••••••••••••••••••••••••••••••••
11
Ill.
Scope
of
delivery
•••••••••••••••••••••••••••••••••••••••••••
11
IV.
Intended
use
••••••••••••••
.
••••••••••••••••••••••••••••••••••
12
V.
Safety
regulations
••••••••••••••••••••••••••••••••••••••••••
13 -18
VI. Technical
data
••••••••••••••••••••••••••••••••••••••••••••••
18
VII.
Before
starting
the
equipment
••••••••••••••••••••••••
~
•••••
19-
20
VIII.
Operation
•••••••••••••••••••••••••••••••••••••••••••••••••••
20 -
21
IX. Cleaning
and
maintenance
••••••••••••••••••••
~
••••••••••••
21
X.
Storage/Transport
•••••••••••••••••••
~
••••••••••••••••••••••
22
XI.
Electrical
connection
•••••••••••••••••••••••••••••••••••••••
22 -23
XII.
Disposal
and
recycling
•••••••••••••••••••••••••••••••••••••
23
XIII.
Trouble
shooting
••••••••••••••••••••••••••••••••••••••••••••
24
1 2
I
13
- - - -
12
-----
18
-------
3 4 5 6
d 13
17 16
15
14
6
I .
I Utilisation
~~
5
8 18
12 13
12
A A
19 17
-
-----··-·------------------------------
rj
-
-
-
'
ALDI
•
Grinder/Sander
Warranty Details
The product
is
guaranteed to be free from defects
in
workmanship and parts for a period
of
36 months from the date
of
purchase. Defects that occurwithin this warranty period,
under normal use and care, will be repaired, replaced or refunded at our discretion.
The benefits conferred by this warranty are
in
addition to all rights and remedies
in
respect of
the product that the consumer has under the Competition and ConsumerAct 2010 and similar
state and territory laws.
Our goods come with guarantees that cannot
be
excluded under the Australian Consumer
Law.
You
are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage.
You
are also entitled to have the goods
repaired or replaced ifthe goods fail to
be
of acceptable quality and the failure
does not amount to a major failure.
AFTER SALES SUPPORT
ti
@ 1300
855
831 i;;.
MODEL:BGS700 PRODUCT CODE: 48274 02/2015 3
YEAR
WARRANTY
~
-
-
( -
ALDI
Repair and Refurbished Goods
or Parts Notice
Unfortunately, from
time.
to time, faulty products are manufactured which need to
be
returned
to the Supplier for repair.
Please be aware that
if
your product is capable of retaining user-generated data (such as files
stored on a computer hard drive, telephone nufllbers stored on a mobile telephone, songs
stored on a portable media player, games saved
on
a games console or files stored
on
a USB
memory stick) during the process
of
repair, some or all of your stored data may
be
lost
We recommend you save this data elsewhere prior to sending the product for repair.
You
should also
be
aware that rather than repairing goods, we may replace them with
refurbished goods of the same type·or use refurbished parts
in
the repair process.
Please be assured though, refurbished parts or replacements are only used where they
meet ALDl's stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily, you may escalate your
complaint Please telephone us
on
1300 855
831
or write to
us
at:
RossMac Pty. Ltd.
P.O.
Box 261, Essendon North, Victoria,
3041
1300 855
831
AFTER SALES SUPPORT
it
@ 1300 855
831
i;;;J
3
VEAR
WARRANTY
MODEL: BGS700 PRODUCT CODE: 48274 02/2015
'---"'
@
BGS700 Explanation
of
the symbols on the equipment
Explanation of the symbols on the equipment
0
& Attention!
& Caution!
& Warning!
Read the operating instructions to reduce the risk
of
injury
Wear ear-muffs. The impact
of
noise can cause damage
to hearing.
Wear a breathing mask. Dust which is injurious to health
can be generat~d when working
on
wood and other
materials. Never use the device to work on any materials
containing
asbE!"stos!
Wear safety goggles. Sparks generated during working
or
splinters, chips and dust emitted by the device can
'
cause loss
of
sight.
These operating instructions provide places concerning
your safety which are marked with this indication
Failure to follow these instructions may cause light to
medium risk
of
injury
Failure to follow these instructions may cause danger to
life
or
danger
of
serious injuries
AFTER SALES SUPPORT 9
Ir@
1300 855
831
MODEL:BGS700 PRODUCT CODE: 48274 02/2015
@)
Introduction BGS700
I.
Introduction
Congratulations on choosing to buy a WORKZONE TITANIUM® product.
All products brought to you by WORKZONE TITANIUM® are manufactured to the
highest standards of performance and safety, as part ofour philosophy of customer
service and satisfaction, are backed by our comprehensive 3 Year Warranty.
We hope you will enjoy using your purchase for many years to come.
Note:
According to the applicable product liability law the manufacturer ofthis device
is
not
liable for damages which arise on
or
in
connection with this device
in
case of:
• improper handling,
• non-compliance with the instructions for use,
• repairs
by
third party, non authorised skilled workers,
• installation and replacement
of
non-original spare parts,
• improper use,
• failures of the electrical system due to the non-compliance with the electrical
specifications and the VOE 0100, DIN
57113
I VOE
0113
regulations.
Recommendations:
Read the entire text of the operating instructions prior to the assembly and operation
ofthe device.
These operating instructions are intended to make it easier for you to get familiar
with your device and utilise its intended possibilities
of
use.
The operating instructions contain important notes on how to work safely, properly
and economically with your machine and how to avoid dangers, save repair costs,
reduce downtime, and increase the reliability and working life
of
the machine.
In
addition to the safety regulations contained herein, you must
in
any case comply
with the applicable regulations
of
your country with respect to the operation
of
the
machine.
Put the operating instructions
in
a clear plastic folder to protect them from dirt and
humidity, and store them near the machine. The instructions must be read and
carefully observed by each operator prior to starting the work. Only persons who
have been trained
in
the use
of
the machine and have been informed on the related
dangers and risks are allowed to use the machine. The required minimum age must
be
met.
In
addition to the safety notes contained
in
the present operating instructions and
the special regulations of your country, the generally recognised technical rules for
the operation of wood working machines must
be
observed.
10
AFTER SALES SUPPORT
i;;;.i
iir
(lluv
1300 855
831
MODEL: BGS700 PRODUCT CODE: 48274 02/2015
@
BGS700 Layout/Scope of delivery
II. Layout
1
2
3
4
5
Safety glass
Spark deflector
Spark deflector adjusting screw
Fastening screw Safety glass holder
Guard hood
6 Grinding wheel
7 Workpiece support star screw
8 Workpiece support
9 Grinding I sanding belt
10
Belt guidance adjustment screw
11
Clamp screw for the top belt
roll13r
12
Fastening screw for side cover
13
Side cover
14
Mounting point
15
Foot
16
On/Offswitch
17
18
Coolant reservoir
Fastening screw for workpiece support
Ill. Scope
of
delivery
Grinder/Sander
(1)
Instruction manual
(1)
Sanding disc
(1)
Sanding belt
(1)
Grinding wheel dresser
(1)
Waranty sticker
(1)
• Open the packaging and remove the device carefully.
• Remove the packaging material as well
as
the packaging and transport bracing
(if available).
• Check that the delivery
is
complete.
• Check the device and accessory parts for transport damage.
• If possible, store the packaging until the warranty period has expired.
& Attention!
The device and packaging materials are not toys!
Children must not
be
allowed
to
play with plastic bags, film and small parts! There
is
a risk
of
swallowing and suffocation!
AFTER SALES SUPPORT
11
'il
@J 1300
855
831 Q [email protected]
MODEL:BGS700 PRODUCT CODE: 48274 02/2015
I
11
11
I
:I'
II
I
I
I
I,
i
I .
11
@)
Intended use BGS700
IV.
Intended use
The grinder/sander is a combination device for the coarse and fine grinding/sanding
of metals, woods ofall kinds and other materials using the appropriate grinding/
sanding wheel or belt.
The machine may only
be
used with grinding/sanding wheels
or
belts which are
suitable for it and comply with the characteristic data
in
these instructions.
The machine is allowed to be used only for its intended purpose! Even when the
equipment
is
used as prescribed it
is
still impossible to eliminate certain residual risk
factors. The following hazards may arise
in
connection with the machine's construc-
tion and layout:
• Contact with the grinding wheel where it is not covered.
• Catapulting parts out
of
damag'ed grinding wheels.
• Catapulting of workpieces and parts ofworkpieces.
• Damage to hearing if essential ear-muffs are not used.
• Harmful emissions
of
wood dust when used
in
closed rooms.
• The rotating parts of the device cannot be covered for functional reasons.
Therefore you must exercise care and hold the workpiece firmly to prevent it
slipping which could result
in
your hands coming into contact with the grinding/
sanding belt.
The equipment
is
allowed to be used only for its prescribed purpose. Any other use
is
deemed to be a case of misuse. The user/operator and not the manufacturer will
be
liable for any damage or injuries
of
any kind resulting from such misuse.
Please note that our equipment has not been designed for use
in
commercial, trade
or industrial applications. Our warranty will
be
voided if the equipment
is
used
in
commercial, trade or industrial businesses or for equivalent purposes.
' '
12
AFTER SALES SUPPORT
if
0u1J
1300 855
831
MODEL:BGS700 PRODUCT CODE: 48274 02/2015
@)
BGS700 Safety regulations
V.
Safety regulations
& Caution!
Read all safety regulations and instructions. Any errors made
in
following the safety
regulations and instructions may result
in
an
electric shock, fire and/or serious injury.
Keep all safety regulations and instructions
in
a safe place for future use.
& Warning!
To
protect against electric shock, injury and fire the following basic
safety precautions must be observed when using power tools.
Read and follow these instructions before using the equipment and keep the safety
information
in
a safe place.
1.
Keep work area clean
• Cluttered areas and benches invite injuries.
2. Consider work area environment
• Don't expose power tools
to
rain. Don't use power tools
in
damp or wet loca-
tions. Keep work area well lit. Don't use power tools
in
presence offlammable
liquids orgases.
3. Guard against electric shock
• Prevent body contact with grounded surfaces (e.g. pipes, radiators, ranges
refrigerators).
4.
Keep children away
• Do not allow other persons
to
touch the equipment or cable, keep them away
from your work area.
5.
Store idle tools
• When not
is
use, tools should
be
stored
in
dry, high, or locked-up place, out of
the reach
of
children.
6. Don't force tool
• It will do the job better and safer at the rate forwhich it was intended.
7.
Use right tool
• Don't force small tools or attachments to do the job
of
heavy duty tool. Don't
use tools for purposes not intended.
8. Dress properly
•
Do
not wear loose clothing orjewellery. They can be caught
in
moving parts.
Rubber gloves and non-skid footwear are recommended when working out-
doors. Wear protective hair covering to contain long hair.
9.
Use safety glasses
• Also use face or dust mask
if
cutting operation
is
dusty.
10. Don't abuse cord
• Never carry tool by cord or yank it
to
disconnect it from receptacle. Keep cord
from heat, oil and sharp edges.
AFTER SALES SUPPORT 13
ir
~~
1300 855
831
ii;;!
MODEL: BGS700 PRODUCT CODE: 48274 02/2015
@)
Safety regulations BGS700
11.
Secure work
• Use clamps or a vice to hold work. It's safer than using your hand and it frees
both hands to operate tool.
12. Don't overreach
• Keep proper footing and balance
at
all times.
13.
Maintain tools with care
• Keep tools sharp and clean for better and safer performance. Follow instruc-
tions for lubricating and changing accessories. Inspect tool cords periodically
and, ifdamaged, have repaired by authorized service facility. Inspect exten-
sion cords periodically and replace ifdamaged. Keep handles dry, clean and
free from oil and grease.
14.
Disconnect tools
• When not in use, before servicing, and when changing accessories.
15.
Remove adjusting keys and wrenches
• Form the habit
of
checking to'see that keys and adjusting wrenches are remo-
ved from tool before turning it on.
16. Avoid unintentional starting
• Don't carry plugged-in tool with finger on switch. Be sure switch is
off
when
plugging in.
17.
Outdoor use extension cords
• When tool is used outdoors, use only extension cords intended for use out-
doors and so marked.
18.
Stay alert
• Watch what you are doing. Use common sense. Do not operate tool when you
are tired.
19.
Checkdamagedparts
• Before further use
of
the tool, a guard or other part that is damaged should
be carefully checked to determine that it will operate properly and perform
its intended function.
Check
for alignment
of
moving parts, binding
of
moving
parts, breakage
of
parts, mounting, and any other conditions that may affect its
operation. A guard
or
other part that is damaged'should be properly repai-
red
or
replaced by an authorized service-center unless otherwise indicated
elsewhere
in
this instructions manual. Have defective switches replaced by an
authorized service-center. Do not use tool
if
switch does not turn it on and off.
20. & Warning!
• The use
of
any other accessory
or
attachment other than recommended it this
operating instruction
or
the catalog may present a
ris.k
of
personal injury.
21.
Have your tool repaired by
an
expert
14
• This electric appliance is
in
accordance with the relevant safety rules repairing
of
electric appliances may be carried out only by experts otherwise it may
cause considerable dangerfor the user.
AFTER SALES SUPPORT
if
@ 1300 855
831
MODEL:BGS700 PRODUCT CODE: 48274 02/2015
-,-
@
BGS700 Safety regulations
22. Connect the dust extraction device
• Wherever there are facilities for fitting a dust extraction system, make sure it
is
connected and used.
General safety regulations and accident prevention
It
is
essential that you read the safety regulations and operating instructions
in
their
entirety and follow the information contained therein
in
order to eliminate the possi-
bility
of
an accident or potentially dangerous situation from occurring while working
with the machine.
• Always check the device, the mains cable and the plug before using the device.
Only operate the tool when it
is
in
good working order and is not damaged
in
any
way.
Damaged parts have
to
be replaced immediately by a qualified electri-
cian.
• Always pull the power plug out of the socket outlet before doing any work on the
machine, before changing tools and whenever the machine
is
not being used.
•
To
prevent damage to the power cable, always lead the power cable away from
the rear of the machine.
• Keep the tools
in
a safe place and out of the reach
of
children.
Use
on
materials containing asbestos is prohibited.
Note the corresponding accident prevention regulation issued by the professional
associations
in
your country.
• Use only original replacement parts.
• Repairs may only
be
carried out by a qualified electrician.
• The machine may exceed 91.5 dB at the workplace. The operator will require
noise protection measures and ear muffs if this
is
the case. The noise of this
electric tool is measured
in
accordance with IEC 59 CO
11,
IEC 704, DIN 45635
part
21,
NFS 31-031 (84/537/EEC).
• Ensure that you maintain a steady foothold. Avoid abnormal working postures.
•
Do
not expose your electric tool to rain. Nev~r use electric tools
in
damp or wet
locations or near flammable liquids or gases.
• Protect the mains cable from becoming damaged by oil, solvents and sharp
edges.
• Keep your work area tidy.
• Make sure that the switch
is
turned off when connecting the tool to the power
supply.
• Wear suitable work clothes. Never wear loose fitting clothes and jewellery. Wear
a hair net
if
you have long hair.
• For your own safety, use only accessories and auxiliary equipment from the
manufacturer of your electric tool.
• Always wear safety goggles, protective gloves and ear-muffs while carrying out
grinding, brushing and cutting jobs.
AFTER SALES SUPPORT
15
if
C,.us)
1300 855
831
~
MODEL: BGS700 PRODUCT CODE: 48274 02/2015
I
I
@)
Safety regulations BGS700
• Check that the rotating speed shown on the wheel is equal to or higher than the
rated speed
of
rotation for the tool.
• Make sure that the grinding wheel is
of
the correct size for the grinder.
• Grinding wheels must be handled and stored with care
in
accordance with the
manufacturer's instructions. Examine the grinding wheel each time before using
it.
Never use grinding wheels which have parts broken offor are cracked or
in
any other way damaged.
• Be sure
to
use only grinding wheels and brushes which are marked with a
speed at least as high as the speed indicated on the rating plate
of
the electric
tool.
• Check that grinding wheels are fitted
in
accordance with the manufacturer's
instructions.
• , Make sure that intermediate layers are used if they are supplied with and re-
quired
for
the grinding wheel.
• Make sure that the grinding disk
is
correctly fitted and secured before you start
to use the tool. Allow the machine
to,
run without load and
in
a safe position for
5 minutes. Stop the machine immediately if severe vibrations arise or any other
defects are noticed. Ifthis should be the case, examine the machine to find the
cause.
• The electric tool must never
be
used without the guard hood supplied with
it.
• Never use separate reducer sleeves
or
adapters to make grinding wheels with
larger holes fit
on
the machine.
• Take precautions to ensure that flying sparks do not cause any danger, e.g. that
they do not hit anyone or cause inflammable substances to ignite.
• Always wear safety goggles and ear-muffs; use other personal safety equipment
such as gloves,
,an
apron and a helmet if necessary.
& The workpiece becomes hot during grinding.
Important! Risk of burns!
Let the workpiece cool down. The material may become glowing hot during the
grinding. On longerjobs, allow the workpiece
to
cool down occasionally.
• Do not use coolant or,the like.
Special safety information
1 Before you use the grinder, carry out a ring test on the grinding wheels (perfect
grinding wheels emit a clear tone when hit lightly with e.g. a plastic hammer).
This also applies when you fit new grinding wheels {damage
in
transit). It is
essential to subject the machine to an unloaded test run
of
at least 5 minutes.
Leave the danger zone while the test
is
in
progress.
2 Use only grinding wheels which are marked with details
of
the manufacturer, the
type
of
bonding agent used, dimensions and the permissible RPM.
16 AFTER SALES SUPPORT
if@
1300 855
831
MODEL:BGS?OO PRODUCT CODE: 48274 02/2015
<§)
BGS700 Safety regulations
3 Grinding wheels must be stored
in
a dry place, ideally at a constant tempera-
ture.
4 Use only the clamping flanges supplied with the equipment to mount the grind-
ing wheels.
5 Use only clamping flanges of identical size and identical shape to mount the
grinding wheels. The intermediate layers between the clamping flange and the
grinding wheel must be comprised of elastic materials, e.g. rubber, soft card-
board, etc.
6 Never enlarge a grinding wheels' mounting hole by subsequent drilling.
7 The workpiece supports and the top adjustable safety guards must always be
moved
as
close
as
possible to the grinding wheel (max. 2
mm
clearance).
8 Grinding wheels are not allowed to be used without the safety device. The fol-
lowing clearances must not be exceeded:
-Workpiece support/grinding wheel: max. 2 mm
-Safety guard/grinding wheel: max. 2
mm
.
9 The guard holder, workpiece support and transparent guard must
be
fitted be-
fore the double grinder is used.
10 The power plug must
be
pulled out before changing the grinding wheel.
11
The max. circumferential speed
of
the dry grinding wheel is:
23
mis mis=
(d
x
3.14
X
n)
f (60 X 1000)
d =diameter of the grinding wheel
in
mm
n =motor revolutions per minute
12
Max. permitted motor housing temperature: 80°C
13
Before starting work, firmly screw the grinder to the workbench by using the 2
mounting points on the base plate.
14
Adjust the spark deflector periodically
in
order to compensate the wear of the
wheel. Please note that the distance between the spark deflector and the wheel
is
to be kept as small as possible and should
in
no case exceed 2 mm.
15
The grinding wheel must be replaced at the latest when the spark deflector and
the workpiece support can no longer be set a maximum distance
of
2
mm
from
the grinding wheel.
16
Process only work pieces, which can be held
in
position safely. Processing very
small work pieces will increase the risk injuries. Longer work pieces must be
supported by using a roller stand (optional equipment)
or
the like.
Residual risks
Even if you use this electric power tool in accordance with instructions,
certain residual risks cannot be ruled out. The following hazards may arise
in
connection with the equipment's construction and layout:
• Lung damage
if
no suitable protective dust mask is used.
• Damage to hearing
if
no suitable ear protection is used.
• Health damage caused by hand-arm vibrations
if
the equipment is used over a
prolonged period
or
is not properly guided and maintained.
AFTER SALES SUPPORT 17
1i' @ 1300 855
831
J;;!
MODEL:BGS700 PRODUCT CODE: 48274 02/2015
,,
I'
_,
@)
Tech.nical data
BGS?OO
Keep
this
safety
information
in a safe place.
VI. Technical data
dimensions
L x W x H
mm
360 X 280 X 335
111
grinding
wheel
mm
150
grinding
wheel
thickness
mm
20
111
grinding
wheel
hole
mm
12.7
max.
circumferential
speed
mis
23
belt
speed
m/min
895
grinding
/sanding
belt
L x W
mm
686 X 50
weight
kg 10.2
drive
rated
voltage
V/Hz 230/50
power
rating
370W S2 30min
idle
speed
n,
min·'
2850
Load factor:
A load factor of
82
30 min (intermittent periodic duty) means that you may operate
the motor continuously at its nominal power level (230 W) for no longer than 30 min-
utes ON period. If you fail to observe this time limit the motor will overheat. During
the OFF period the motorwill cool again to its starting temperature.
Noise
Sound values were measured
in
accordance with
EN
61029.
Sound
pressure
level L A 82.3 dB(A)
Uncertainty
K A 3 dB
Sound
power
level
L,,A
91.5 dB{A)
Uncertainty
KwA
3 dB
Wear
ear-muffs.
The impact
of
noise can cause damage to hearing.
Limit
the
noise
to
a
minimum!
• Only use appliances which are in perfect working order.
• Service and clean the appliance regularly.
• Adapt yourworking style to suit the appliance.
•
Do
not overload the appliance.
• Have the appliance serviced whenever necessary.
• Switch the appliance
off
when it
is
not
in
use.
• Wear protective gloves.
18
AFTER SALES SUPPORT
J;!
if
@ 1300 855 831
MODEL:BGS?OO PRODUCT CODE: 48274 02/2015
@
BGS700 Before starting the equipment
VII. Before starting the equipment
Before you connect the equipment to the mains supply make sure that the data on
the rating plate are identical to the mains data.
Always pull the power plug before making adjustments to the equipment.
• The machine must be set up so that it stands firmly, i.e. it must be securely
screwed to a work bench
or
similar.
• The grinder should be fixed permanently at a suitable place. To attach the grin-
der
to a hard and flat surface, there are
two
mounting points on the grinder. The
tool
support
should be approximately at the height
of
your
elbow. The working
area is
in
front
of
the machine -keep it free
of
obstacles.
• All covers and safety devices have to be properly fitted before the equipment is
switched on.
• It must be possible for the grinding wheel to run freely.
Assembling the spark deflector (Fig.1-3)
• Slide the spark deflector (2) under the guard hood (5). Screw the spark deflector
(2) to the guard hood (5) by using the spark deflector adjustment screw (3).
• Use the
spark
deflector adjustment screw (3) with the spring
washer
and the
washer
to fix the spark deflector (2).
To
secure you will need a screwdriver (Fig.
2).
• Adjust the spark deflector (2) using the spark deflector adjusting screw (3)
so
· that the distance between the
dry
grinding wheel (6) and the
spark
deflector (2)
is as small as possible and certainly does not exceed 2 mm. (Fig.3)
• Adjust the spark deflector (2) periodically to compensate for
wear
on the wheel.
Fitting the workpiece supports (Fig. 1/4/5/6)
• Secure the workpiece supports (8) to the grinder/sander using the workpiece
support star screw (7) on belt side and the 2 fastening screws for workpiece
support (18) on grinding wheel (5) side.
Adjusting the workpiece supports (Fig.
6)
• Adjust the workpiece supports (8) using the fastening screws
for
workpiece sup-
port (18) and the workpiece support star screw (?)so that the distance between
the
dry
grinding wheel (6)
or
the grinding/sanding belt (9) and the workpiece
supports (8) is as small as possible and certainly does not exceed 2 mm.
• Adjust the workpiece supports (8) periodically to compensate
for
wear
on the
dry
grinding wheel.
AFTER SALES SUPPORT 19
fir
@ 1300 855
831
MODEL:BGS700
PRODUCT
CODE: 48274 02/2015
I,
:.i
I
11;1
'
. I
I
I .
I
@
Before starting the equipmenUOperation BGS700
Changing the grinding wheel (Figs. 1/7/8)
Loosen the 3 fastening screws for side cover
(12)
holding the grinding wheel side co-
ver
(13),
turn anti-clockwise and take it
off
(Fig.
7).
Slacken the nut (Fig. 8/A) (import-
ant: the grinding/ sanding wheel
is
fastened with a lefthanded thread) by holding the
nut (Fig. 9/A)
of
the grinding/sanding belt roller
on
the opposite side. Then remove
the flange (B) and replace the grinding wheel (6). The grinding wheel
is
mounted
with the help
of
a rag.
Mount the flange (B) on the shaft and screw on the nut (A) hand-tight (Fig.
8).
To
tighten the nut (A), hold the grinding wheel
(6)
with a rag and tighten the nut (A)
(Fig.
8).
Changing the grinding/sanding belt (Fig. 1/10)
• Loosen the fastening screw for side cover
(12)
and remove the side cover
(13).
• Slacken the clamp screw for the top belt roller
(11)
by a few turns.
• Push the top belt roller downwards and pull the grinding/sanding belt out
off
the
rollers.
• Place the new grinding/sanding belt (9)
in
the center of the top and bottom roll-
ers and release the clamping top belt roller.
• Now tighten the clamp screw
for
the top belt roller
(11)
and fit the side safety
guard.
• With the belt guidance adjustment screw (10) on the side you can adjust the belt
run by turning. Precise adjustment
of
the belt run
is
best done by turning the
grinding/sanding belt by hand.
&.
Attention!
After replacing the grinding wheel
or
sanding belt, all guards must be reassembled.
VIII. Operation
On/Offswitch (16)
•
To
switch on the equipment set'the On/Offswitch
(16)
to position
1.
• Move the On/Offswitch (16) to position Oto switch
off
the equipment. After
switching on, wait for the equipment to reach its maximum speed of rotation.
Only then should you begin with the grinding.
Grinding
• Place the workpiece onto the workpiece support (8) and slowly guide the
workpiece towards the grinding wheel (6) at the desired angle to the point where
workpiece and grinding wheel make contact.
• Move the workpiece slightly back and forth to produce an optimal grinding re-
sult. This way the grinding wheel (6) will be evenly worn. Allow the workpiece to
cool down occasionally.
20 AFTER SALES SUPPORT
'if
@ 1300 855
831
MODEL: BGS700 PRODUCT CODE: 48274 02/2015
@)
BGS700 Operation/Cleaning and maintenance
Grinding/sanding with the belt
• Always hold the workpiece firmly during grinding/ sanding.
• Do not exert excessive pressure.
• The workpiece should be moved on the belt to prevent the paper wearing on
one side.
• Important! Pieces ofwood should always be sanded with the grain to prevent
them splitting.
Using the grinding wheel dresser
The grinding wheel dresser is a tool for straightening
of
grinding wheels.
• Press lightly against grinding wheel -without creating sparks. Move the dresser
sideways over the entire width ofwheel.
& Attention! Always wear safety goggles.
& Attention!
Ifthe grinding wheel or the grinding/sanding belt becomes jammed during operation,
please remove the workpiece until the tool reaches its top speed again.
IX. Cleaning and maintenance
Always pull out the mains power plug before starting any cleaning work.
Cleaning
• Keep all safety devices, air vents and the motor housing free
of
dirt and dust
as far as possible. Wipe the equipment with a clean cloth
or
blow
it
with com-
pressed air at low pressure.
• We recommend that you clean the device immediately each time you have
finished using
it.
• Clean the equipment regularly with a moist cloth and some soft soap. Do not
use cleaning agents or solvents; these could attack the plastic parts
of
the
equipment. Ensure that no water can seep into the device.
Maintenance
There are no parts inside the equipment which require additional maintenance.
AFTER SALES SUPPORT
21
'if
@ 1300 855
831
MODEL:BGS700 PRODUCT CODE: 48274 02/2015
:11
I,
Ii
·'
!
<§)
Storage/Transport/Electrical connection
BGS?OO
X.
Storage/Transport
Store the equipment and accessories out
of
children's reach
in
a dark and dry place
at above freezing temperature. The ideal storage temperature is between 5 and 30
~C.
Store the electric tool
in
its original packaging.
Lt:..
Attention!
Unplug
the
machine!
The appliance must unconditionally
be
secured against falling or turning down du-
ring transport.
The appliance can
be
lifted on the left and right grinding wheel I belt sander cover.
Power cable, flexible lamp shaft etc. should not
be
used for transport purpose.
XI. Electrical
connection
The electrical
motor
installed
is
connected
and ready
for
operation.
The
connection
complies
with
the
applicable VDE and DIN
provisions.
Lt:..
Attention!
This
machine
shall
always be
supplied
via a residual
current
device
with
a
rated residual
current
of
30
mA
or
less
to
avoid
electric
shock.
Lt:..
Attention!
The
power
supply
cord
of
this
machine
has an
equipment-grounding
conduc-
tor
and a
grounding
plug. The
plug
must
be
plugged
into
an
appropriate
outlet
which
is
properly
installed
and
grounded
in
accordance
with
all local
codes
and
ordinances.
Lt:..
Warning!
Check
the
voltage! The
voltage
must
comply
with
the
information
on
the
rating label!
The
customer's
mains
connection
as well as the
extension
cable used
must
also
comply
with
these
regulations.
Damaged
electrical
connection
cable
The insulation on electrical connection cables
is
often damaged.
This may have the following causes:
• Passage points, where connection cables are passed through windows or
doors.
• Kinks where the connection cable has been improperly fastened or routed.
• Places where the connection cables have been cut due
to
being driven over.
• Insulation damage due to being ripped out ofthe wall outlet.
• Cracks due to the insulation ageing.
22 AFTER SALES SUPPORT
Q
1f@
1300 855
831
MODEL:BGS?OO
PRODUCT
CODE: 48274 02/2015
Table of contents
Other Workzone Grinder manuals
