Workzone ELITEDESK1400 Installation guide

Assembly Instruction Manual
MODEL NO.: ELITEDESK1400
1372
763
496
- Please follow these assembly instructions as it will save you time,
make assembly easier and prevent possible damage to your unit.
- Correct Assembly is your responsibility.
- We strongly recommend that the unit is assembled on a soft
surface such as a carpet or blanket.
- We suggest the use of hand tools only to tighten the screws
and fittings, as power tools can strip threads if over tightened.
- When moving this furniture item, always carry the unit dragging
or sliding the unit could damage then unit and the floor surface.

1/4
1/4*30 7*35
13*6.5*1
1/4*13
M4*57
910
11
2
EXPLODED VIEW:

5
9
9
5
10 1
3
1
7
9
10 1
9
7
3
1
4
4

6
8
8
10 1
6
10
1
1
4 2
3
4
3
2

11 2
11 2
7
Wall
IMPORTANT!
THIS FURNITURE ITEM MUST BE FIXED TO THE WALL WITH THE ENCLOSED WALL FASTENER, OR SIMILAR
DEVICE. NON USE OF THE WALL FASTENER AND/OR IMPROPERLY FITTED MAY CAUSE THE PRODUCT TO MOVE
AND POSSIBLY LEAD TO DAMAGE AND/OR INJURY.
IF IN DOUBT CONSULT A QUALIFIED TECHNICIAN AT YOUR DIY/HOME IMPROVEMENT STORE, DIFFERENT WALL
MATERIALS REQUIRE DIFFERENT TYPES OF FIXING DEVICES.
USE FIXING DEVICES SUITABLE FOR THE WALLS IN YOUR HOME (MAY NOT BE THE ONES SUPPLIED). IF YOU ARE
UNCERTAIN ABOUT WHAT TYPE OF SCREW OR FITTING TO USE, PLEASE CONTACT YOUR LOCAL HARDWARE
STORE FOR ADVICE.