DIN Rail DMX512 Constant Voltage Decoder
- 4 -
short-circuit, the decimal point of the digital tube does not ON, and the digital
tube only displays the current DMX address, the decoder works again after the
short circuit or the wrong wiring is cleared.
Enter the self-test mode, as follows:
*520-579，First two digital indicate the modes, the third one shows the speed. 10
speed levels ,from 0-9 speed decreasing. Total: 6 modes ,such as:
Speed for Program 520 – 579 (Color Changing Fading Mode) for one step and not
for the whole program:
0=0,5 sec. | 1=1 sec. | 2=2 sec. | 3=3 sec. | 4=5 sec. | 5=10 sec. | 6=15 sec. |
7=30 sec. | 8=60 sec. | 9=120 sec.
Speed for Program 570 - 579 ( one step and not for the whole program):
0=0,02 sec.| 1= 0,04 sec.| 2=0,1 sec.| 3=0,2 sec.| 4=0,5 sec.| 5=1 sec.| 6=2 sec.|
7=5 sec.| 8=10 sec.| 9=15 sec.
3. Control mode settings
(1) The 40-channel decoder can work in five control modes of
DIM\CT\RGB\RGBW\RGBWY.
(2) The 32-channel decoder can work in four control modes of
DIM\CT\RGB\RGBW.
(3) The 24-channel decoder can work in three control modes of DIM\CT\RGB.
