World Vision force 1+ User manual

English
force1 +
User's Guide

World Vision force 1+
- Open-source Linux operation system
(Full compatible with Enigma2)
- Broadcom 1300 MHz Mips processor (BCM 7356)
- DVB-S2 & Hybrid DVB-T2 / DVB-T / DVB-C HD Combo Tuner
- 256 MB NAND Flash / 8MB NOR Flash / 1GB DDR3 RAM
- 10/100/1000 Mbps Ethernet interface
- Internal SATAconnection for 2.5" HDD
- 1 x smartcard reader
- 1 x Common Interface
- 3 x USB2.0 (1xFront / 2x Rear)
- 1 x HDMI Interfac
- 1 x Dolby Digital Plus compliant via optical S/PDIF output
- Full HD (1080p 50/60Hz)
- Full 3D
- Perfect 2HD Picture in Picture (PIP)
- Extended EPG and recording reservation on EPG
- Timer & multi-event recording
- Media Player
- Downloadable Plug-ins packages
- Unlimited Channel Memory
- Super sensitive tuner for very weak
signals and weak transponders
- DiSEqC 1.0, 1,1 ,1.2 and 1.3(USALS) compatible
- under 0.5 Watt Stand-by power consumption
force 1+
http://www.world-vision.ru

ACCESSORIES
Please check that the following contents are enclosed :
User's Manual
AAA X 2 BATTERIES
HDMI Cable
SATA Cable
Power Supply
Remote control unit

VIEWS
Front view 8 9
10
Watching TV status (Live mode)
OSD operating status (OSD mode)
1. Power
Switch between operation and standby modes.
2. Volume +/-
To change volume level
Tochange parameter value.
3. Channel +/-
To change current channel.
Tomove cursor up/down.
4. Menu
To enter or exit the Main Menu.
5. Exit
Close and return to the previous menu and screen.
6. OK
To open channel list
To Select / Confirm an item
7. Info
Shows current program's stream information.
8. Display (VFD)
Display current menu information and channel name etc.
9. Smartcard reader
Insert smart card with the golden chip facing up.
10. Common Interface Slot
PCMCIA Slot for a CA module.

Rearview
5 7 11
1 3 46 8 9
10 12
1 RF IN/OUT
Hybrid tuner input/loop-through for DVB T2/T and C signal.
Turn the receiver OFF first before connecting.
2 LNB1 INPUT
1st Satellite tuner input from the LNB on a dish antenna.
Turn the receiver OFF first before connecting.
3 LNB2 INPUT
2nd satellite tuner input from the LNB on a dish antenna.
Turn the receiver OFF first before connecting.
4 S/PDIF
Connect with an appropriate optical cable to your HiFi system.
5 Audio / Video Output
Connect to TV using RCAcable.
6 HDMI
To connect HDMI cable for your HD TV.
7 Ethernet
Communication port via HTTP, FTP, NFS, Telnet and
Samba to access your Hard Drive or to upload channel lists.
This is also used to update force1's software.
8 2x USB
Connect to the External HDD or USB storage
with USB cable (Max. 500mA).
9 RS232
RS232C serial data port.
10 External Power Supply
Connect the power supply(12V/3.5A) that came with your force1+.
11 PowerSwitch
Turn AC Power On/Off.
12 FAN Hole
with speed control function.

INSTALLATION
1. Please refer to the Safety Instruction before powering on the device.
2. Connect force 1+ to your TV set using HDMI cable or a RCA cable, etc.
Use an HDMI or Component cable in order to view HD.
HDMI RCA
3. Connect the coaxial cable (from the satellite dish) to the LNB input of force 1+.
4. Power on the force 1+.
5. After booting up, Initial setup menu comes up for the installation according to your TV settings and
Antennasettings.

REMOTE CONTROL UNIT
POWER : Switches between operation and standby.
MUTE : Mutes or unmutes the audio temporarily.
HELP : This provides users with a quick guide of using force1.
HOME : Instantly moves to the top of the menu list.
END : Instantly moves to the bottom of the menu list.
Zoom : To zoom the screen In/Out.
LAN : Open network configuration menu.
NUMERIC KEY (0~9) : Control the numerical operation and change the Channel/Service number directly.
PREV (<) : Return to the previous channel/service or move to the end of the Service List or the Play List.
NEXT (>) : Go to the next channel/service or move to the beginning of the Service List or the Play List.
VOL. +/- : Increase/Decrease the volume.
EPG : Displays the Electronic Program Guide (EPG) information if provided.
INFO : Displays the Electronic Program Guide (EPG) information if provided.
CH. +/- : Navigates through the scanned channel list.
AUDIO : Select an audio track and a sound mode.
TELETEXT : Switch between the teletext and TV modes.
SUBTITLE : Display the subtitle language list.
TIMER : Start timer function.
MENU : Open main menu & select sub menu using by navigation buttons.
EXIT : Close and return to the previous menu and screen.
Navigation Keys : Navigates up/down and left/right on the menu options. Up/down keys are used to call up the channel list.
OK : Select a menu, or confirms the selected operation. Also displays the channel list while watching a programme.
SAT : Open channel list according to satellite.
PROV. : Open Provider list.
COLOR BUTTONS : Activates certain menu functions. Usage instructions are shown in each OSD menu.
LIST : Open recorded file menu.
MEDIA : Open media file list.
Y-TUBE : Open YouTube list.
PIP : Open Picture in Picture.
TRICK PLAY BUTTONS : Control multimedia function.
TV : Switch to TV mode.
RADIO : Switch to Radio mode.

SAFETY INSTRUCTIONS
Pleaseread the safety instructions carefully before using the force 1+.
The manufacturer takes no responsibility for incorrect handling of the force 1+.
*For sufficient ventilation,leave enough space.
*If unused for a prolonged amount of time,turn the power OFF.
*Do not cover the force 1+'s ventilation openings with items such as newpapers,tablecloths, curtains etc.
*Do not expose the force 1+ to liquid,moisture,direct sunlight and extreme weather.
*Do not place open flame sources,such as lighted candles, near or on the force 1+.
*Do not place any containers with liquid,such as vases, on the force 1+.
*Do not connect or modify cables while the force 1+ is connected to the power.
*Do not remove the cover. Risk of electric shock!
*Do not touch the force 1+ with wet hands. Risk of electric shock!
*Do not put any metal items into the slots or ventilation openings.
*Please disconnect your force 1+ from the main power during thunder or heavy storms.
*Disconnect the main power cable if the power cord is damaged.
*Cleaning : Disconnect the main power cord before cleaning the cover. Use a slightly damp cloth without cleaning agents.
*Connect the force 1+ only to suitable sockets. Do not allow overloads to occur.
*The socket-outlet shall be installed near the equipment and shall be easily accessible.
WARNING!
*Modifications and changes to the force 1+ lead to loss of warranty.
*Incorrect software installation leads to loss of warranty.
*This instruction might be modified without prior notice.
DISPOSAL INSTRUCTIONS
1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered
by the European Directive 2002/96/EC.
2.All electrical and electronic products should be disposed of separately from the municipal waste stream
via designated collection facilities appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences
for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city office,
waste disposal service or the shop where you purchased the product.