World Vision T59M User manual

Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block anyventilation openings, install in accordance with the instructions.
8) Do not install near any heat sources such as radiations, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized plug. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protected the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Unplug this apparatus during lighting storms or when unused for long periods of time.
13) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
14) Mains plug is used as the disconnect device, the disconnect device shall remain
readily operable.
15) The ventilation should not be impeded by covering the ventilation openings with items,
such as newspapers, table-cloth, curtains, etc.
16) No naked flame sources, such as lighted candles, should be placed on the apparatus.
17) Attention should be drawn to the environmental aspects of battery disposal.
18) The use of apparatus in moderate climate.
19) The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the apparatus.
WARNING: To reduce the risk of fire or electric shock,do not expose this apparatus to rain
or moisture.
WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or
the like.
WARNING: You must peel off the membrane of the topcover before using.Or it would harm
your receive box without emitting its heat.
The symbol indicates that dangerous voltages constituting a risk of electric
shock are present within this unit.
The symbol indicates that there are important operating and maintenance
instructions in the literature accompanying this unit.
This symbol indicates that this product incorporates double insulation
between hazardous mains voltage and user accessible parts. When
servicing use only identical replacement parts.
CAUTION: When the apparatus was in electrostatic circumstance, it may be
malfunction and need to reset by user.
WARNING: The USB memory stick should be pluggedin the unit directly.
USB extension cable should not be used to avoid failing of data transferring
and interference caused.
This marking indicates that this product should not be disposed with
other household wastes throughout the EU. To prevent possible harm
to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe
recycling.

Table of contents
1 Panel ........................................................Ошибка! Закладка не определена.
1.1 Front Panel................................................................................................1
1.2 Rear Panel................................................................................................1
2 Remote Control...................................................................................................1
2.1 Key introduce............................................................................................2
2.2 Installing the Battery..................................................................................2
3 Connections........................................................................................................2
4 First Installation...................................................................................................3
4.1 Channel.....................................................................................................3
4.2 AV .............................................................................................................3
4.3 Installtion...................................................................................................3
4.4 Preference ................................................................................................3
4.5 Setting.......................................................................................................3
4.6 Media:........................................................................................................3
5. Troubleshooting .................................................................................................4
6. Technical Specifications .....................................................................................5
1 Front and Rear Panel
1.1 Front Panel
1.2 Rear Panel
1) ANT IN: This socket connects to your externalAerial.
2) LOOP OUT: Used to connect another unit’s ‘ANT IN’ port.
3) HD OUT: High definition audio and video output used to connect to a HD device.
4) CVBS:This socket outputs composite video signal.
5) AUDIO L/R: This socket outputs analog audio L/R signal.
6) DC IN: This is used to connect to your adaptor.

2 Remote Control
2.1 Key introduce
1) STANDBY: Switch the unit to on or
standby.
2) COLOUR BUTTONS:
RED: no function; Green: witch
resolution;
Yellow: Switch aspect ratio; Blue: Timer
setting;
3) FWD: Searches forwards during media
play.
4) REV: Searches backwards during media
play.
5) PAUSE: Pauses media play.
6) PLAY: Starts or resumes media play.
7) TEXT: Displays Teletext Information.
8) SUBTITLE: Selects Subtitles Language.
9) EPG: (Electronic Program Guide)Turns the
program guide on.
10) UP / DOWN: Navigates through the Menus.
Selects the next or previous Channel.
11) RIGHT/LEFT: Navigates through the
Menus. Increases or decreases volume.
12) MENU: Turns on Main Menu.
13) FAV: Turns on Favourite Menu.
14) VOL+/-: Increases or decreases volume.
15) 0-9 (Numeric Buttons): Selects a channel
or setting.
16) V-FORMAT: Video display scale.
17) MUTE: Mute or Restore Audio Output.
18) PREV: Skips to the previous track during
playing media.
19) NEXT: Skips to the next track during playing media.
20) STOP: Stops media play.
21) USB: Used to display a list of programs recorded on the current disc.
22) RECALL: Used to switch between the last two viewed channels.
23) AUDIO: Selects anAudio Language or Audio Mode.
24) INFO: Displays additional channel information.
25) OK:Confirms an entry or selection. Displays the list of channels.
26) EXIT: Exits the current Menu or returns to the previous Menu.
27) PAGE+/ -: Page up,Page down.
28) REC: Used to record the program.
29) TV/RADIO: Switches from TV function to Radio function and from Radio to TV.
2.2 Installing the Battery
Remove the battery coverfrom the Remote Control and put 2xAAAsize batteriesinside the
compartment.
The diagram inside the Battery Compartment shows the correct way to install the batteries.
3 Connections
Caution: Make sure to check the voltage specification of the wall outlet is the same rating
with the receiver. To prevent the risk of electric shock, do not open the cover or the back of
the receiver.
Note: When connecting the receiver to other equipment, e.g., TV, VCR and amplifier, make
sure to refer to relevant user manual for instruction. Also, make sure you disconnect all the
equipments from the mains supply before the connection.

4 First Installation
After all connections have beenmade properly, switch on TV and make sure the receiver is
connected to the Main Power. Press Power button to switch receiver on. If you are using
the receiver for the first time or restored to Factory Default, the Main Menu will appear on
your TV screen.
(1) Select [OSD Language] and press RIGHT/LEFT key to select an language.
(2) Select [Country] and press RIGHT/LEFT key to change frequency list .
(3) Select [Frequency Channel] and press RIGHT/LEFT key to test signle.
(4) Select [Channel Search] and press OK to start Search Channel.
4.1 Channel List
To access the Menu, press the MENU button and select [Channel List]. TheMenu provides
options to adjust the Channel Manage Settings. Select an option and press OK or RIGHT
to adjust that setting. Press the EXIT button to exit the Menu.
4.1.1 TV Channel List/Radio Channel
To manage your program preferences (lock, edit, move or delete), you will need to enter
the Channel Manager Menu.

Lock Channel
You can lock selected programs for restricted view. Lock a TV Program:
1.Press RED button the select the preferred program,and you should input ‘0000’to
disappear the password box and then a lock- shaped symbol will display. The program is
now marked as locked.
2. Repeat the previous step to select more programs.
3. To confirm and exit the menu, press the EXIT button.
4. Press the RED button to disable the locked program.
5. To view the locked program, you will be required to enter either the default password
'0000' or your last set password.
Skip Channel
1.Press GREEN button, then select the program you would like to skip, skip symbol will
display.
2.Press GREEN button, the program ismarked as a skip.
Move Channel
1. Press YELLOW button, then select the program you would like to move, move symbol
will display.
2. Press UP/DOWN to move focus.
3. Press INFO button to confirm.
4. Repeat the above steps to move more channels.
Sort Channel
1.Press BLUE button enter edit mode. Press RED button, the will display sort list.
2.Press UP/DOWN select a sort style. Press OK button to confirm.
3.Press EXIT button exit edit mode.
Rename Channel
Press BLUE button enter edit mode. Press GREEN button. Select the program to rename
the channel with the keyboard.
Delete a Channel
1. Press BLUE button enter edit mode, press BLUE button the Select the program you
want delete, press BLUE button then press EXIT button to exit edit mode, the program will
be deleted.
2. Repeat the previous step to select more programs to delete.
Favorite Channel
1.Press FAV button, then seleet the program you would like set favorite, the will display
favorite list.
2.Prsee UP/DOWN to select you would like set style.
3.Press OK button to confirm.
4.Press EXIT button exit favorite list.
5.Press FAV button exit FAV mode
4.1.2 EPG (Electronic Program Guide)
The EPG is an on-screen TV guide that shows scheduled programs seven days in
advance for every tuned channel. Press the EPG button on the Remote Control to access
guide. You can use the UP/DOWN key to select the preferred program. If there is more
than one day of the information, Press RIGHT to select one day of the information, then
press RIGHT to select one information, the you can press OK button show the information

detail or press GREEN to schedule a view or record.
4.2 Search
To access the menu, press MENU and select [Search]. The Menu provides options to
adjust the search settings. Select an option and press RIGHT/LEFT to adjust the settings.
Press EXIT to exit the Menu.
4.2.1 Auto Search
Auto search all frequency
4.2.2 Manual Search
You can select one frequency to search channel
4.2.3 Country
You can select country to change frequency list.
4.2.4 Antenna Power
If you select on, the antenna power will open.
4.2.4 FAT Only
If you select Yes, the will only search FTA program.
4.3 System
To access the Menu, press MENU then select [System]. The Menu provides options to
adjust the system settings. Press UP/DOWN to select an option and press RIGHT/LEFT to
adjust that setting. Press EXIT to exit the menu.

4.3.1 Language
Set OSD Language,First Audio Language,Second Audio Language,Subtitle Language,
Teletext.
4.3.2 AV Setting
1.Set the TV System to PAL,NTSC.
2.Set Video Resolution to [1080i],[1080p],[720p],[576p] for PAL,[576i] for PAL,[480p] for
NTSC, [480i] for NTSC.
3.Set Apsect Mode to [Atuo],[16:9],[4:3PanScan],[4:3LetterBox].
4.Viewo Effects you can choose to Standard, Default, Vivid.
5.Audio Out yon can choose to LPCM Out(for dobly), BS Out.
6.Scart Out you can choose to CVBS, RGB.
7.Play Mode you can choose to Stable,AV Sync.
4.3.3 Lock Time Setting
You can setting date, time, time zone, and summer time.
4.3.4 Timer Setting
8.You can schedule the channel to View or Record.
4.3.5 Parental Lock
1.You can change Age Limit to ViewAll, 7-year, 12-year, 15 year, 18 year, LockAll.
2.You can set Menu Lock
3.You can set Channel Lock
4.You can set the STB new passwork.
4.3.6 OSD Setting
1.You can set Subtitle Display.
2.You can set OSD Timeout.
3.You can set OSD Transparency.
4.3.7 Favorite
You can rename favorite name.
4.4 Tools
To access the Menu, press MENU and select [Tools]. The Menu provides options to adjust
the tool settings. Press UP/DOWN to select an option and press RIGHT/LEFT to adjust
that setting. Press EXIT to exit the menu.
4.4.1 Information
View model, hardware and software information.
4.4.2 Factory Setting
Reset your Set Top Box to the Default Factory Settings. In Main Menu select [Factory
Setting] and press OK or RIGHT to select. Enter your password or the default password
'0000' and press OK to confirm.This option will delete all preset channels and settings.
4.4.3 USB Update
Select to start software update if USB is connecting and there's a upgrading file.
4.4.4 USB Backup
Select to start backup software or user DB if USB is connecting and there's a upgrading
file.

4.5 Media Center
To access the Menu, press Media button on the remote control. The menu provides
options to Movie and playback Music and Photo files、Record Files; it can support MP3,
JPEG, BMP files. It will only support USB device with FAT andFAT32 file system. It will not
support NTFS file system.
4.5.1 Music/Picture/Movie/Record
you can select the Music or Photo type in this menu and press OK to enter the file browser
and select the file to playback
4.5.2 Storage Format
You can format the selected disk.
4.5.3 DVR Configuration
You can slect PVR Partition.
4.6 Network
To access the Menu, press MENU and select [Network]. The Menu provides options to
adjust the tool settings. Press UP/DOWN to select an option and press RIGHT/LEFT to
adjust that setting. Press EXIT to exit the menu.
4.6.1 Wifi
Insert Wifi Device, then appear “Wifi device plug in”, Press OK and select Search, Select
your Wifi and enter password, connect Wifi.If Wifi Device not insert, the warning message
“Wifi device not exist!”.
4.6.2 Online Movie App
If Wifi is connected,Press OK will show youtube app,else the warning message "Wifi:(not
connected)" will appear.
Importer: PAZ Media Kft (Veres P. út 511163 Budapest Hungary)
Manufacturer: Shenzhen Joyan Digital Technology Co., Ltd

5. Troubleshooting 6. Technical Specifications
Problem
Potential Reasons
What to do
No picture
Power isn't connected
Connect the power
The power switch is not on
Switch on the power
Screen shows
No Signal
Not connect DVB-T cable
Plug in the DVB-T cable
Incorrect setting
Set up correct parameter
No sound from
Speaker
No or incorrect connection
with audio cable
Connect the audio cable
correctly
Mute the sound
Switch on the correct
volume control
Incorrect sound track
Try another sound track
Only sound,
no image on the
screen
No or incorrect connection
with AV cable
Connect the audio cable
correctly
The program is a radio
program
Press <TV/RADIO> key
to
shift into TV mode
Remote control
unit is not workable
The battery is exhausted
Change new battery
Remote control unit is not
in the right opposite of the
front panel or too far from it
Adjust the way of holding
remote control unit and
near from the panel
The image stop
suddenly or mosaic
The signal is too weak
Strengthen the signal
Item
Specification
Tuner
Frequency Range
VHF Band:174 MHz ~230MHz
UHF Band:470 MHz ~868MHz
Bandwidth
6MHz, 7MHz, 8MHz,
Input Impedance
75Ohm
Signal Input Level
-65 ~ -25dBm
RF Power Output
5V,Max 100mA
Demodulation
Demodulator
QPSK/16QAM/64QAM/256QAM
Guard Intervals
1/4,19/256,1/8,19/128,1/16,1/32,1/128
Code Rate
DVB-T:Viterbi+ReedSolomon
1/2,2/3,3/4,5/6,7/8
DVB-T2:LPDC+BCH 1/2,3/5,2/3,3/4,4/5,5/6
Connections
ATN IN
IEC169-2 Female
LOOP OUT
IEC169-2 Male
USB
USB 2.0(5V,Max 500mA)
Power
Input
DC IN 5V1.5A
Consumption
Max 7.5W
Display
Decoder Module
PAL,NTSC
Resolution
720X576(PAL),720X480(NTSC),720P,1080i
480i,480P,576i,576P,1080P
Decoding
Aspect Rate
4:3(Letterbox, Pan& Scan)16:9
Video
MPEG2 Transport [email protected]
MPEG4 AVC/H.264 HP@L4
Audio
MPEG2 Audio Layer I&II
Others
Compliance
Standard DVB-T (EN 300 744) & DVB-T2 (EN
302 755)
Sound Mode
Right, Left, Stereo