Wortmann TERRA LED 2747W User manual

LCD/LED 2747W

Safety Precautions and Maintenance 1
Basic setup 2
Screen image setups 2
Functions 3
BRIGHTNESS 3
IMAGE 3
COLOR TEMP. 4
OSD SETTING 5
RESET 6
MISC 7
Installing the LED Monitor 8
Supporting Timing Modes 9
Troubleshooting 10
SPECIFICATIONS 11
English

English
1
Safety Precautions and Maintenance
Read this manual carefully and retain for future reference
1. Unplug the monitor before cleaning it with a slightly damp cloth.
2. Wiping the screen with a dry cloth is recommendable, and only during the power has
been switched off.
3. Do not use alcohol or ammonia-based liquids.
4. This monitor is designed with ventilation holes on the cabinet back, please do not cover
them or block it.
5. Also avoid placing the monitor near the electric heater or heater, including in an enclosed
room with no ventilations.
6. Please do not insert any matter or spray any liquid onit.
7. Please do not position the monitor on unsafe space, if it falls, it may be damaged and
may hurt the user.
8. Unplug the monitor if it is not going to be in use for an extended period of time.
9. Please do not put heavy items on the monitor, or electric cord.
10.Please do not open the monitor back panel because the monitor contained high voltage
current.
Contents
＊Monitor
＊HDMI cable
＊AC Power cord (C5)
＊Warranty card
＊Quick start guide
＊Audio cable
Features：
＊16.7M high quality image colors
＊Smart image screen setting-OSD with simple layout and easy selection
＊Smart control interfaces for easy settings

English
2
Basic setup
a) Connect a DVI cable or HDMI cable to the PC (signal output) and to the monitor.
HDMI connector Audio connector
AC IN (C5) DVI connector
b) The monitor has a wide power voltage range; it can be used on AC100-240V~ 60/50Hz
power supply.
c) Connect the power cable to the Monitor power socket and to the power source in the
room.
d) Turn on the power source supply.
e) To switch on the monitor, press the power control key.
Screen image setups
The right backside of the monitor has five keys to adjust the monitor settings with aid of the
OnScreen Display.
Confirm selection OSD / When not in OSD-Menu: source selection
Adjust the options-move up / When not in OSD-Menu: call the volume menu
Adjust the options-move down or lower / When not in OSD-Menu: call the brightness menu
Shows main menu/ Exit from menu
Press [1]key long-term: OSD LOCKED
Then press [1]key long-term: OSD UNLOCKED
Power ON/OFF
Press [] key long-term: POWER LOCKED
Then press [] key long-term: POWER UNLOCKED
2
1

English
3
Functions:
BRIGHTNESS
Press 1 button the main menu will appear as follows:
Press △/ ▽button to select BRIGHTNESS in the main menu, then press button to
enter.
BRIGHTNESS
Press △/ ▽button to select BRIGHTNESS, then press button confirmation choice and
press △/ ▽button to adjust.
CONTRAST
Press △/ ▽button to select CONTRAST, then press button confirmation choice and
press △/ ▽button to adjust.
PICTURE MODE
Press △/ ▽button to select PICTURE MODE, then press button confirmation choice
and press △/ ▽button to select STANDARD, MOVIE, GAME, TEXT.
DCR (Dynamic Contrast Ratio)
Press △/ ▽button to select DCR, then press button confirmation choice and press
△/ ▽button to select ON or OFF.
OD(Overdrive)
Press△/ ▽button to select OD, then press button confirmation choice and press
△/ ▽button to select STRONG, MIDDLE, WEAK, OFF.
IMAGE
Press button to select IMAGE in the main menu, then press button to enter.
12
2
2
2
2
2
2
1
2
BRIGHTNESS
：EXIT
：SELECT
BRIGHTNESS
50
CONTRAST
PICTURE MODE
DCR
OD
50
STANDARD
OFF
OFF

English
4
ASPECT
Press △ / ▽ button to select ASPECT, then press button confirmation choice and press
△/ ▽button to select WIDE or 4:3.
COLOR TEMP.
Press △/ ▽button to select COLOR TEMP. in the main menu, then press button to
enter.
COLOR TEMP.
Press △/ ▽button to select COLOR TEMP., then press button confirmation choice and
Press △/ ▽button to choose the color temperature (NORMAL, WARM, USER, COOL).
RED
When you choose the USER Press △/ ▽button to select RED, then press button to
adjust the value of the three primary colors of red.
1 2
1 2
COLOR TEMP.
：EXIT ：SELECT
COLOR TEMP. NORMAL
RED 50
GREEN
50
BLUE 50
2
IMAGE
2
：EXIT
：SELECT
ASPECT WIDE
2
2

English
5
GREEN
When you choose the USER Press △/ ▽button to select GREEN, then press button to
adjust the value of the three primary colors of green.
BLUE
When you choose the USER Press △/ ▽button to select BLUE, then press button to
adjust the value of the three primary colors of blue.
OSD SETTING
Press △/ ▽button to select OSD SETTING in the main menu, then press button to
enter.
LANGUAGE
Press △/ ▽button to select LANGUAGE, then press button confirmation choice
and press △/ ▽button to select, then press button confirmation choice. (ENGLISH,
FRANÇAIS, DEUTSCH, ITALIANO, ESPAÑOL, РУССКИЙ)
12
12
OSD SETTING
LANGUAGE
OSD H. POS.
50
OSD V. POS.
50
15
OSD SETTING
0
TRANSPARENCY
OSD
TIMER
2
2
2
2
：EXIT ：SELECT
：EXIT ：SELECT
2
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
ESPAÑOL
РУССКИЙ

English
6
OSD H. POS.
Press △/ ▽button to select OSD H. POS. then press button confirmation choice and
Press △button OSD toward the right direction. Press ▽button OSD toward the left
direction.
OSD V. POS.
Press △/ ▽button to select OSD V. POS. then press button confirmation choice and
Press △button OSD toward the up direction. Press ▽button OSD toward the down
direction.
OSD TIMER
Press △/ ▽button to select OSD TIMER, then press button confirmation choice
and Press △/ ▽button to adjust.
TRANSPARENCY
Press △/ ▽button to select TRANSPARENCY, then press button confirmation
choice and Press △/ ▽button to adjust.
RESET
Press △/ ▽button to select RESET in the main menu, then press button to enter.
RESET
To recall factory settings for Video & Audio controls.
12
2
2
2
RESET
：EXIT ：SELECT
2
RESET
2

English
7
MISC
Press △/ ▽button to select MISC in the main menu, press button to enter.
SIGNAL SOURCE
Press △/ ▽button to select SIGNAL SOURCE, then press button confirmation
choice and press △/ ▽button to select DVI or HDMI then press button
confirmation choice.
VOLUME
Press △/ ▽button to select VOLUME, then press button confirmation choice and press
△/ ▽button to adjust.
AUDIO INPUT (only available in HDMI mode)
Press △/ ▽button to select AUDIO INPUT in the main menu then press button
confirmation choice and press △/ ▽button to select DIGITAL or ANALOG.
12
2
2
2
2
2
1920X1080 60Hz
：EXIT ：SELECT
MISC
SIGNAL SOURCE
HDMI
VOLUME
50
AUDIO INPUT
DIGITAL

English
8
OSD LOCKED
OSD UNLOCKED
Installing the LED Monitor
1. Place the monitor face down on a soft cloth or cushion on a table.
2. Install the stand base to the monitor.
Press
[
1
]
key long-term to lock the
OSD
Press [
]
key long-term to lock the
power button
Then press []key long-term to
unlock the power button
POWER LOCKED
POWER UNLOCKED
Then press
[
1]
key long-term to unlock
the OSD